NAME
bsd.port.mk
—
ports tree master Makefile
fragment
SYNOPSIS
.include <bsd.port.mk>
DESCRIPTION
bsd.port.mk
holds all the standard
routines used by the ports tree. Some variables and targets are for its
internal use only. The rest is documented here.
bsd.port.mk
also uses quite a few helper
scripts. Those live under
${PORTSDIR}/infrastructure/bin, and they do have
manpages under ${PORTSDIR}/infrastructure/man.
Other BSD variants, as well as older
versions of bsd.port.mk
, include other targets and
variables. Conversion methods are outlined here.
Most variables and targets are documented, with very few exceptions.
This documentation covers the current targets, variables and paths
used by bsd.port.mk
. There is a separate section
covering the fake framework, a section explaining flavors and
multi-packages, and a section covering the generation of package
information.
It ends with sections on obsolete constructs that a porter may need when converting from other ports systems.
Binary package details are mostly covered in pkg_create(1) for the packing-list details, and in pkg_add(1) for the installation semantics.
Selected common user activity such as the building of every package in the system is covered by ports(7) instead. packages(7) provides an overview of the result.
TARGETS
{build,run,all,test}-dir-depends
- Print all dependencies for a port in order to build it, run it, build and run it, or to run regression tests. The output is formatted as package specification pairs, in a form suitable for tsort(1).
full-{build,run,all,test}-depends
- Print all dependencies a package depends upon for building, running, or both, as a list of package names, sorted by dependency order with tsort(1), most dependent port first.
{build,lib,test,run}-depends-list
- Print a list of first level package specifications a port depends as build dependencies, library dependencies, test dependencies or run dependencies.
print-{build,run}-depends
- User convenience target that displays the result of
full-{build,run}-depends
in a more readable way. {pre,do,post}-*
- Most standard targets can be specialized according to a given port's
needs. If defined, the
pre-*
hook will be invoked before running the normal action; thedo-*
hook will be invoked instead of the normal action; thepost-*
hook will be invoked after the normal action. Specialization hooks exist forbuild
,configure
,distpatch
,extract
,fake
,install
,patch
,test
. See individual targets for exceptions. addsum
- Complete the ${CHECKSUM_FILE} record of checksums with files that have
been added since
makesum
. Complain if anything does not match. all-lib-depends-args
- Process the full
LIB_DEPENDS
list into a form suitable for pkg_create(1), seeprint-package-args
. build
,all
- Default target. Build the port. Essentially invoke
env -i ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} \ -f ${MAKE_FILE} ${ALL_TARGET}
build-depends
- Verify the ports mentioned in
BUILD_DEPENDS
, by checking the corresponding packages are actually installed, and install the missing ports by recursing through the ports tree. Deprecated, seeprepare
. check-register
- Introspection target. Verify from the ports tree, without building
anything, that the current subpackage will register okay (see
PLIST_DB
). check-register-all
- Apply
check-register
to all subpackages of the current port. checkpatch
- Debugging version of the
patch
target that simulates invoking patch(1). checksum
- Check distribution archives and distribution patches control sum against
the results recorded in ${CHECKSUM_FILE}, using the message digest
(checksum) utilities listed in ${PREFERRED_CIPHERS}. All the files needed
to recreate a port should be in ${CHECKSUMFILES} and checksummed. Invoking
checksum
withREFETCH
=true
will try to fetch a version with the correct checksum from the OpenBSD main archive site in the case of a checksum mismatch.NO_CHECKSUM
can be used to avoid all checksumming steps. clean
- Clean ports contents. By default, it will clean the work directory. It can
be invoked as make clean='[depends build bulk work fake flavors dist
install sub package packages plist]'.
- work
- Clean work directory.
- bulk
- Clean bulk cookie.
- build
- Clean the WRKBUILD directory (only useful if SEPARATE_BUILD is set).
- depends
- Recurse into dependencies.
- dist
- Clean distribution files.
- fake
- Clean fake installation directory.
- flavors
- Clean all work directories.
- install
- Uninstall package.
- package
- Remove all copies of package file.
- plist
- Remove registered packing lists of all subpackages.
- sub
- With install or package, clean subpackages as well.
- packages
- Shorthand for ‘sub package’.
- all
- Shorthand for ‘work flavors packages plist’.
clean-depends
- Shorthand for ‘
make clean=depends
’. configure
- Configure the port. Might be a void operation. Unless overridden,
configure
creates the ${WRKBUILD} directory (see SEPARATE_BUILD), and runs whatever configuration methods are recorded inCONFIGURE_STYLE
. depends
- Check all the port's dependencies, that is:
build-depends
,lib-depends
,run-depends
,test-depends
. describe
- Prints a one-line index entry of the port, suitable for ${PORTSDIR}/INDEX.
distclean
- Shorthand for ‘
make clean=dist
’. distpatch
- Apply distribution patches only. See
patch
andPATCH_CASES
for details. dump-vars
- Dump the values of all relevant variables in a port, prepended with the port's FULLPKGPATH.
extract
- Extract the distribution files under ${WRKDIR}
(but see
EXTRACT_ONLY
andNO_DEPENDS
). Refer toEXTRACT_CASES
for a complete description. Do not usepre-extract
anddo-extract
hooks. fake
- Do a fake port installation, that is, simulate the port installation under
${WRKINST}. There is no
do-fake
andpost-fake
hooks.fake
actually usespre-fake
,pre-install
,do-install
andpost-install
. Overridepre-install
,do-install
, orpost-install
to change behavior. Do not touchpre-fake
unless you really know what you are doing. See THE FAKE FRAMEWORK section below. fake-wantlib-args
- Check
WANTLIB
against the list of installed packages and libraries in the ports tree. Seeprint-package-args
. fetch
- Fetch the distribution files and patchfiles, using ${FETCH_CMD}. Each file
of the
DISTFILES
andPATCHFILES
lists is retrieved, if necessary, from the list of sites inMASTER_SITES
.If a filename ends with a ‘:0’ to ‘:9’ extension, it will be retrieved from
MASTER_SITES0
toMASTER_SITES9
instead. After stripping that extension if necessary, if the entry parses as ‘filename{url}sufx’ it will be fetched as urlsufx instead, yet still stored as filenamesufx.Transfers in progress will be stored as filenamesufx.part.
The ports framework uses ${DISTDIR}/${DIST_SUBDIR} (aliased to ${FULLDISTDIR}) to cache the ports distribution files and patch files. Note that this framework is also used by mirroring scripts, which will also retrieve
SUPDISTFILES
, to fill with supplementary distribution files which are not needed for every configuration.Note that fetching a significant number of distfiles, or fetching all distfiles relevant to a port and dependencies is better accomplished using dpb(1) with the
-F
option.Use of
{pre,do,post}-fetch
hooks is forbidden, as this would make mirroring of distfiles very complicated. SeeCHECKSUMFILES
,CDROM_SITE
,DISTDIR
,DISTFILES
,DIST_SUBDIR
,FETCH_CMD
,FETCH_MANUALLY
,FETCH_SYMLINK_DISTFILES
,FULLDISTDIR
,MAKESUMFILES
,MASTER_SITES
,MASTER_SITES0
,...
,MASTER_SITES9
,PATCHFILES
,SUPDISTFILES
,REFETCH
. fetch-all
- also fetches
SUPDISTFILES
, for use with e.g.,makesum
. index
- Top-level target, see ports(7).
install
- Install the package after building. See the description of
THE FAKE FRAMEWORK for the
non-intuitive details of the way
{pre,do,post}-install
hooks are actually used by the ports tree. install-all
- Install all packages in a multi-packages port.
lib-depends
- Verify that the library dependencies a port needs are actually there, by checking the library specifications.
lib-depends-args
- Filter
LIB_DEPENDS
to keep only entries required byWANTLIB
, and output a list of dependencies suitable for pkg_create(1), seeprint-package-args
. lib-depends-check
- Verify that the
LIB_DEPENDS
andWANTLIB
are accurate for the port. Seeport-lib-depends-check
, which is quicker. license-check
- Check that
PERMIT_PACKAGE_*
settings match: if any dependency has a more restrictive setting, warn about it. This warning is advisory, because the automated license checking cannot figure out which ports were used only for building and did not taint the current port. link-categories
- Create symbolic links in other directories that correspond to the port's
CATEGORIES
. Note that this does not affect bulk package building, since those links don't appear in the upper-level Makefiles. See alsounlink-categories
. lock
- Manually obtain a lock on a given directory. Output must be used to update
environment variables. The lock can be released with
unlock
. Seldom used, see ports(7) for details. makesum
- Create the ${CHECKSUM_FILE} list of recorded checksums by running the
cryptographic fingerprint sha256 on ${MAKESUMFILES}. That normally
includes ${DISTFILES}, ${SUPDISTFILES} and ${PATCHFILES}.
NO_CHECKSUM
can be used to avoid all checksumming steps. manpages-check
- Verify that makewhatis(8) can do a correct job with the port's manpages.
mirror-maker
- Top-level target, see mirroring-ports(7).
mirror-maker-fetch
- Debug target: generate the
mirror-maker
makefile fragment and use it to fetch files, see mirroring-ports(7). no-lib-depends-args
- Degenerate form of
lib-depends-args
that does not do anything. Seeprint-package-args
. no-wantlib-args
- Degenerate form of
wantlib-args
that does not do anything. Seeprint-package-args
. package
- Build a port package (or packages in a
MULTI_PACKAGES
case) from the fake installation. Involves creating packaging information from templates (seeCOMMENT
,SUBST_VARS
among others) and invoking pkg_create(1) for each package in theMULTI_PACKAGES
list. If the repository already contains up-to-date packages, they are not rebuilt. If PLIST_DB is set, the resulting packaging information is compared with existing stuff, and saved if new, with loud complaints if it changed without a REVISION bump. Arch-independent packages are created in ${PACKAGE_REPOSITORY}/no-arch, and copied into ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/all as needed. If ${PERMIT_PACKAGE_FTP} is set to ‘Yes’, copies built packages into ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/ftp, using hard links if possible. If ${PERMIT_PACKAGE_CDROM} is set to ‘Yes’, copies built packages into ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/cdrom, using hard links if possible. patch
- Apply distribution and OpenBSD specific patches.
Because of historical accident,
patch
does not follow the exact same scheme other standard targets do. Namely,patch
invokespre-patch
(if defined),do-patch
, andpost-patch
, but the defaultdo-patch
target invokesdistpatch
directly. So, if thedo-patch
target is overridden, it should still begin by calling ‘make distpatch
’, before applying OpenBSD specific patches. Accordingly, the exact sequence of hooks is:pre-patch
,do-distpatch
,post-distpatch
,do-patch
,post-patch
. If ${PATCHDIR} exists, the files described underPATCH_LIST
will be applied underWRKDIST
. See alsoREORDER_DEPENDENCIES
for possiblepost-patch
clean-up. peek-ftp
- Connect to the first site in
MASTER_SITES
, in the right directory, and leaves user at ftp(1)'s prompt. pkglocatedb
- Top-level target, see ports(7).
port-lib-depends-check
- Verify that the
LIB_DEPENDS
andWANTLIB
hold all shared libraries used for every package in the port. See library-specs(7). This makes use ofprint-plist-with-depends
to avoid actually building the packages, it only needs the completion of thefake
stage, and thus is quicker thanlib-depends-check
, unless you already have all binary packages. port-wantlib-args
- Resolve
WANTLIB
against the ports tree itself and system libraries, without looking at built or installed packages, and writes a list of options suitable for pkg_create(1). Seeprint-package-args
. prepare
- Prepare a port for building, by checking and installing all required
dependencies, constructed from
LIB_DEPENDS
andBUILD_DEPENDS
. InMULTI_PACKAGES
setups, see FLAVORS AND MULTI_PACKAGES. print-package-args
- Print all dependency-related information that will be passed as parameters
to pkg_create(1), e.g.,
-W
wantlib and-P
depends lines.Those parameters are generated by
run-depends-args
forRUN_DEPENDENCIES
handling, a form oflib-depends-args
forLIB_DEPENDS
andWANTLIB
interaction, and a form ofwantlib-args
forWANTLIB
resolution.Variables
lib_depends_args
andwantlib_args
control the exact behavior:lib_depends_args
is normally set tolib-depends-args
, but will be set toall-lib-depends-args
byport-lib-depends-check
, in order to have access to the full list of LIB_DEPENDS for figuring out missing WANTLIB.wantlib_args
is normally set towantlib-args
but it may be set toport-wantlib-args
for introspection purposes, tofake-wantlib-args
to avoid some checks, or tono-wantlib-args
to avoid expensive WANTLIB checks entirely. print-update-signature
- Print the update signature, as computed using information from the ports
tree, in the same format used for
pkg_info(1)
-S
. print-plist
- Generate and print a package packing-list from the static information present in the port.
print-plist-all
- Iterate over
print-plist
for all subpackages in a given port. print-plist-all-with-depends
- Iterate over
print-plist-with-depends
for all subpackages in a given port. print-plist-contents
- Generate and print package contents from the static information present in
the port. In contrast with
print-plist
, the package contents only consists of files, all tagged with category markers such as @file. See pkg_create(1). print-plist-libs
- Generate and print the list of static and dynamic libraries present in the port. See pkg_create(1).
print-plist-libs-with-depends
- Like
print-plist-libs
, but slower. It also handlesLIB_DEPENDS
,RUN_DEPENDS
, andWANTLIB
, so that the packing-list has complete dependency information. print-plist-with-depends
- Like
print-plist
, but slower. It also handlesLIB_DEPENDS
,RUN_DEPENDS
, andWANTLIB
, so that the packing-list is complete. rebuild
- Force rebuild of the port.
reinstall
- Force reinstallation of a port, by first cleaning the old installation.
Seldom needed, as
update
will often do the right thing. repackage
- Rebuild the packages of a port after removing existing packages.
run-depends
- Verify the ports mentioned in
RUN_DEPENDS
, by checking the corresponding packages are actually installed, and install the missing ports by recursing through the ports tree. Invoked right before installing the package. run-depends-args
- Process
RUN_DEPENDS
and outputs a list of dependencies suitable for pkg_create(1), seeprint-package-args
. show
- Invoked as make show=name, show the contents of ${name}. Invoked as make show="name1 name2 ...", show the contents of ${name1} ${name2} ..., one variable value per line. Mostly used from recursive makes, or to know the contents of another port's variables without guessing wrongly.
show-fake-size
- Print the size of ${WRKINST}. Used by some options of
dpb(1), suitable for
BULK_TARGETS
. show-prepare-results
- Print the list of actual installed packages found out by
prepare
. show-prepare-test-results
- Print the list of actual installed packages found out by
prepare
andtest-depends
. show-required-by
- Print the list of pkgpath(7) for all ports that will be affected by the current port changing. Works by walking the list of dependencies, in reverse.
show-run-depends
- Print all running dependencies for a port, one per-line, without duplicates.
subpackage
- Build a port package. Exactly like
package
, but affects only one single subpackage in multi-packages ports. show-size
- Prints the size of the work directory. Used by some options of
dpb(1), suitable for
BULK_TARGETS
. subupdate
- Update an existing installation to a newer package, exactly like
update
, but affects only one single subpackage in multi-packages ports. test
- Run regression tests for the port. Essentially depend on a correct build
and invoke
env -i ${ALL_TEST_ENV} ${MAKE_PROGRAM} ${ALL_TEST_FLAGS} \ -f ${MAKE_FILE} ${TEST_TARGET} ${TEST_LOG}
If a port needs some other ports installed to run regression tests, use
TEST_DEPENDS
. If a port needs special configuration or build options to enable regression testing, define a ‘test’FLAVOR
. test-depends
- Verify packages needed for regression tests, using the same scheme as
build-depends
. Only invoked when regression tests are run, or explicitly throughdepends
. unlink-categories
- Remove symbolic links in other directories that correspond to the port's
CATEGORIES
. See alsolink-categories
. unlock
- Manually release a lock on a given directory. See
lock
. update-patches
- Create or update patches for a port, using update-patches(1), which invokes diff(1) between file and file.orig, based on file.orig existence. In order to generate a patch, the original file needs to be named file.orig and file edited. After the target is invoked, the patches are placed under the patches/ directory. It moves existing patches from patch-file to patch-file.orig.
update
- Update an existing installation to a newer package: scan the installation
for a package with the same
FULLPKGPATH
, and update it using ‘pkg_add -r’ if a newer package is available. In multi-packages ports, all relevant packages are updated. SeeUPDATE_COOKIES_DIR
andFORCE_UPDATE
as well. update-or-install
- Update an installed package or perform a fresh installation, by using
‘pkg_add -r’. Handles one single package in multi-packages
ports. See
UPDATE_COOKIES_DIR
andFORCE_UPDATE
as well. update-or-install-all
- Update installed packages or perform a fresh installation, by using
‘pkg_add -r’. Handles all packages in multi-packages ports.
See
UPDATE_COOKIES_DIR
andFORCE_UPDATE
as well. update-plist
- Update the packing lists for a port, using the fake installation and the
existing packing lists.
update-plist
should produce mostly correct PLIST, PFRAG.shared and PFRAG.no-shared files, handling shared libraries, GNU info(1) files, setuid files, and empty directories. It moves existing files to PLIST.orig, PFRAG.shared.orig and PFRAG.no-shared.orig. If the generated lists include files and directories that shouldn't be included, comment these like this:@comment unwanted-file @comment unwanted-dir/
Subsequent calls to
update-plist
will automatically recognize and handle such lines correctly.update-plist
may not handle flavor and multi-packages situations correctly yet, so beware. verbose-show
- Similar to
show
, except that it prefixes each value with the variable name, e.g.,VAR=value
. Also note that it does not show undefined variables, contrary toshow
which outputs blank lines for these. wantlib-args
- Call
port-wantlib-args
andfake-wantlib-args
and compare the results, errors out in case of discrepancies. Seeprint-package-args
.
VARIABLES
Note that some variables are marked as
‘User-settings’, which means that individual ports should not
modify them, and that some variables are marked as
‘read-only’, which means that they shouldn't ever be changed.
In a MULTI_PACKAGES
setup, some variables have
settings specific to a given subpackage. See
FLAVORS AND
MULTI_PACKAGES.
show
- Invoked as make show=name, show the contents of ${name}. Invoked as make show="name1 name2 ...", show the contents of ${name1} ${name2} ..., one variable value per line.
ALL_FAKE_FLAGS
- Flags passed to ${MAKE} invocations during the fake process. Equals
${MAKE_FLAGS} ${DESTDIRNAME}=${WRKINST} ${FAKE_FLAGS}
. Read-only. ALL_TEST_ENV
- Environment passed to test. Equals
${MAKE_ENV} ${TEST_ENV}
. Read-only. ALL_TEST_FLAGS
- Flags passed to ${MAKE} invocations during test. Equals
${MAKE_FLAGS} ${TEST_FLAGS}
. Read-only. ALL_TARGET
- Target used to build software. Default is ‘all’. Can be set to empty, to yield a package's default target.
APM_ARCHS
- Set to the list of
apm(4) architectures. Read-only. Use with
ONLY_FOR_ARCHS
. ARCH
- Current machine architecture. Read-only.
AUTOCONF
- Location of the autoconf binary if needed. Defaults to autoconf (though autoreconf might be more appropriate).
AUTOCONF_DIR
- Where to invoke autoconf if ${CONFIGURE_STYLE} includes autoconf. Defaults to ${WRKSRC}.
AUTOCONF_VERSION
- Starting with OpenBSD 3.3, several versions of
autoconf may coexist peacefully. The main autoconf script is a shell
wrapper in the devel/metaauto package, and
similarly for automake. Setting
AUTOCONF_VERSION
along withCONFIGURE_STYLE
set to autoconf is the correct way to specify which one to use.AUTOCONF_VERSION
defaults to 2.13. If autoconf must be run manually,MODGNU_AUTOCONF_DEPENDS
can be used to specify what packages to depend upon. AUTOHEADER
- Location of the autoheader binary. Defaults to autoheader.
AUTOMAKE_VERSION
- Several versions of automake may coexist peacefully.
AUTOMAKE_VERSION
must be set before trying to run automake. Defaults to 1.4. Note that even ifCONFIGURE_STYLE
includes automake, automake should still be run manually during the rightconfigure
stage. AUTOUPDATE
- Location of the autoupdate binary. Defaults to autoupdate.
BASE_PKGPATH
- Full pkgpath(7) to the current port, taking flavors into
account. See also
BUILD_PKGPATH
, which also includes pseudo-flavors. Read-only. BASELOCALSTATEDIR
- User settings. Base location for system-wide state directory. Defaults to
${VARBASE}. See
LOCALSTATEDIR
. BASESYSCONFDIR
- User settings. Base location for system-wide configuration files. Defaults
to /etc. See
SYSCONFDIR
. BATCH
- User-settings. Set to ‘Yes’ to avoid ports that require
user-interaction. Use in conjunction with
INTERACTIVE
to simplify bulk-package builds. (See IGNORE). BE_ARCHS
- Set to the list of big-endian architectures. Read-only. Use with
NOT_FOR_ARCHS
andONLY_FOR_ARCHS
. BUILD_PACKAGES
- The actual list of packages that will be built, once architecture problems and pseudo-flavors have been taken into account. See FLAVORS AND MULTI_PACKAGES.
BROKEN
- Define only for broken ports, set to reason the port is broken. See also
NO_IGNORE
,TRY_BROKEN
. BROKEN-<arch>
- Define only for ports broken on a given architecture. Distinct from
ONLY_FOR_ARCHS
andNOT_FOR_ARCHS
, which are used to mark ports for which support for some architectures does not exist at all, or is completely obsolete. BSD_INSTALL_{PROGRAM,SCRIPT,DATA,MAN}[_DIR]
- Macros passed to make and configure invocations. Set based on corresponding INSTALL_* variables.
BUILD_DEPENDS
- List of other ports the current port needs to build correctly. Each item
has the form ‘[pkgspec:]pkgpath[:target]’.
‘target’ defaults to ‘install’. The package
installed must conform to the ‘pkgspec’, which is by default
obtained from the dependent ‘pkgpath’ (see
PKGSPEC
). If no installation is involved, the infrastructure will still check that the directory would provide a package conforming to the ‘pkgspec’. ‘pkgpath’ is set relative to ${PORTSDIR}, see pkgpath(7) for details. Build dependencies are checked before theextract
stage duringprepare
.Build dependencies with a
patch
,configure
orbuild
target will be processed in a subdirectory of the working directory, specifically, in ${WRKDIR}/some/directory, with some/directory the directory part of the ‘pkgpath’. BUILD_ONCE
- User settings. Defaults to ‘No’. Set to ‘Yes’
during bulk builds.
When
BUILD_ONCE
is set to ‘Yes’, allPSEUDO_FLAVORS
matching ‘no_*’ will be disabled, unless the special pseudo-flavor ‘bootstrap’ is also set.This is a bulk build optimisation, automatically set by dpb(1): to avoid rebuilding the same package several times, a full bulk build will strip most ports of pseudo-packages variations that remove subpackages.
For instance, an individual package may depend on databases/db/v4,no_java,no_tcl, to avoid bringing a jdk in during a quick build. Nevertheless, during a full bulk build, databases/db/v4 will only be built once, as the pseudo-flavor will be automatically removed.
However, the extra ‘bootstrap’ rule is needed to take build cycles into account. For instance, the x11/gnome/gvfs,-goa subpackage depends on gnome-online-accounts, which in turn requires x11/gnome/gvfs,-main to build (through its dependencies). So x11/gnome/gvfs has
PSEUDO_FLAVORS = no_smb no_goa bootstrap
and the GNOME build first builds x11/gnome/gvfs,no_smb,no_goa,bootstrap,-main which is later used to rebuild x11/gnome/gvfs. BUILD_PKGPATH
- Full pkgpath(7) to the current port, taking flavors and
pseudo-flavors into account. See also
BASE_PKGPATH
, which doesn't include pseudo-flavors. Mostly useful to write dependencies for subpackages like this:LIB_DEPENDS-foo=${BUILD_PKGPATH}
and avoid starting to build a package with some other flavor combination. See pkgpath(7) on the subject of ‘pkgpath normalisation’. Read-only. BULK
- User settings. If set to ‘Yes’, all successful package
builds and installations will clean their working directories, after
invoking any targets mentioned in BULK_TARGETS, and commands mentioned in
BULK_DO. Can be set on a per-${PKGPATH} basis. For instance, setting
BULK_misc/screen=No will override any BULK=Yes passed on the command line.
If set to ‘Auto’, it will apply to dependencies, but not to
the current port itself. See
BULK_COOKIES_DIR
. Defaults to ‘Auto’. BULK_COOKIES_DIR
- User settings. Used to store cookies for successful bulk-package builds, defaults to ${PORTSDIR}/bulk/${MACHINE_ARCH}.
BULK_DO
- Commands to run after each bulk package build before cleaning up the working directory. Empty defaults. Can be set on a per-${PKGPATH} basis, e.g., BULK_DO_${PKGPATH}=...
BULK_FLAGS
- Flags to pass to build each target in
BULK_TARGETS
. BULK_TARGETS
- Targets to run after each bulk package build before cleaning up the working directory. Empty defaults. Can be set on a per-${PKGPATH} basis, e.g., BULK_TARGETS_${PKGPATH}=...
BZIP2
- Name of the bzip2 binary.
CATEGORIES
- List of descriptive categories into which this port falls. Mandatory. One
entry must match the current pkgpath: devel/gmake
must belong to the ‘devel’ category. See
link-categories
,unlink-categories
. CCACHE_DIR
- Sets the cache directory used when
USE_CCACHE
is set to yes. Defaults to ${WRKOBJDIR}/.ccache. CCACHE_ENV
- Sets additional environment variables when
USE_CCACHE
is set to yes. For instance, to enable verbose logging, set CCACHE_ENV="CCACHE_LOGFILE=/tmp/ccache.log" CDIAGFLAGS
- Flags appended to
CFLAGS
ifWARNINGS
is set. CDROM_SITE
- Path to a local source that holds distribution files (usually a CD-ROM or
other similar media), used to retrieve distribution files before going to
the network. Defaults to empty, set to
/cdrom/distfiles/${DIST_SUBDIR} to check that
path. Distribution files are still copied or linked (see
FETCH_SYMLINK_DISTFILES
) intoDISTDIR
if they are found under CDROM_SITE. CFLAGS
- Default flags passed to the compiler for building. Many ports ignore it.
See also
COPTS
,CDIAGFLAGS
. CHECK_LIB_DEPENDS
- User settings. If set to ‘Yes’, every package build will
verify that shared libraries are correctly registered. This is essentially
the same as running ‘
make lib-depends-check
’ after each package build. Defaults to ‘No’, as this can be a big performance hit. CHECKSUMFILES
- List of all files that need to be retrieved by
fetch
, withDIST_SUBDIR
prepended and with the master site selection extension removed. Read-only. See alsoMAKESUMFILES
. CHECKSUM_FILE
- Location for this port's checksums, used by
addsum
,checksum
, andmakesum
. Defaults to distinfo. CHECKSUM_PACKAGES
- User settings. Choose whether or not to checksum packages while building.
Deposits result in
${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/cksums/${FULLPKGNAME}.sha256.
Can be set to ‘Yes’ to compute a checksum for all packages,
‘cdrom’ to compute it only for
PERMIT_PACKAGE_CDROM
packages or to ‘ftp’ to compute it only forPERMIT_PACKAGE_FTP
packages. Defaults to ‘no’, which does not compute a checksum at all. CLEANDEPENDS
- If set to ‘Yes’, the
clean
target will also clean dependencies. Can be overridden on a per-${PKGPATH} basis, by setting CLEANDEPENDS_${PKGPATH}. COMMENT
- Short, one line description of the port, used for the package, and in the INDEX.
COMMENT-foo
- Same as COMMENT but used for sub package -foo in a multi-package setup.
COMMENT-vanilla
- Same as COMMENT but used for a flavored package, if the non-flavored comment is inappropriate.
COMMENT-foo-vanilla
- Same as COMMENT but used for a sub-, flavored package.
COMES_WITH
- The first release where the port was made part of the standard distribution. If the current OpenBSD version is >= this version then a notice will be displayed instead of the port being built.
CONFIG_SITE_LIST
- Used when
CONFIGURE_STYLE=gnu
, or withMODULES += gnu
. List of config.site fragments that will speed up gnu-configure, and prevent it from preferring various gnu programs, unlessBUILD_DEPENDS
explicitly ask for them. Read-only, available for debugging purposes. CONFIGURE_ARGS
- Arguments to pass to configure script. Defaults are empty, except for GNU-style configure, where prefix and sysconfdir are set.
CONFIGURE_ENV
- Basic environment passed to configure script (path and libtool setup). GNU-style configure adds a lot more variables.
CONFIGURE_SCRIPT
- Set to name of script invoked by the
configure
target, if appropriate. Should be either an absolute path, or relative to ${WRKSRC}. CONFIGURE_SHARED
- Set by default to --enable-shared or --disable-shared, depending on whether the architecture supports shared libraries. Should be appended to CONFIGURE_ARGS, for ports that build dynamic libraries and whose configure script supports these options.
CONFIGURE_STYLE
- Set to style of configuration that needs to happen.
If ‘perl’, assume perl(1) ExtUtils::MakeMaker(3p) style. Add ‘modbuild’, to enable perl(1) Module::Build(3p) or ‘modinst’ for Module::Install(3p) style.
If ‘gnu’, assume GNU configure style. Add ‘dest’ if port does not handle DESTDIR correctly, and needs to be configured to add DESTDIR to prefixes (see also
DESTDIRNAME
). Add ‘old’ if port is an older autoconf port that does not recognize --sysconfdir. Add ‘autoconf’ if autoconf needs to be rerun first, but set ‘no-autoheader’ to prevent autoheader from running. Add ‘automake’ if automake may need to be rerun. Otherwise, automake will be explicitly disabled. Note that automake is never run automatically. In order to use it,CONFIGURE_STYLE
should include ‘automake’ and there should be a{pre,do}-configure
target running automake.If ‘imake’, assume port configures using X11 ports Imakefile framework. Add ‘noman’ if port has no man pages the Imakefile should try installing.
If ‘simple’, there is a configure script, but it does not fit the normal GNU configure conventions.
Extensions may be defined by specific MODULES. See port-modules(5) for details.
COPTS
- User settings. Supplementary options appended to ${CFLAGS} for building. Since most ports ignore the COPTS convention, they are actually told to use ${CFLAGS} ${COPTS} as CFLAGS.
CXXDIAGFLAGS
- Flags appended to
CXXFLAGS
ifWARNINGS
is set. CXXFLAGS
- Default flags passed to the C++ compiler for building. Many ports ignore it.
CXXOPTS
- User settings. Supplementary options appended to ${CXXFLAGS} for building.
DESTDIR
- See
DESTDIRNAME
. DESTDIRNAME
- Name of variable to set to ${WRKINST} while faking. Usually DESTDIR. To be used in the rare cases where a port heeds DESTDIR in a few directories and needs to be configured with ‘gnu dest’, so that those few directories do not get in the way.
DISTDIR
- User settings. Directory where all ports distribution files and patchfiles
are stashed. Defaults to ${PORTSDIR}/distfiles.
Override if distribution files are stored elsewhere. Always use
FULLDISTDIR
to refer to ports' distribution files location, as it takes an eventualDIST_SUBDIR
into account. DISTFILES
- The main port's distribution files (the actual software source, except for
binary-only ports). Will be retrieved from the MASTER_SITES (see
fetch
), checksummed and extracted (seechecksum
,extract
).DISTFILES
normally holds a list of files, possibly with ‘:0’ to ‘:9’ appended to select a differentMASTER_SITES
.Each entry may optionally be of the form ‘filename{url}sufx’ to deal with sites that only offer archives as weird urls, doing the transfer of urlsufx into result file filenamesufx. For instance, if
DISTFILES = minetest-{minetest/archive/}${V}${EXTRACT_SUFX}
then
fetch
will retrieve from url ‘minetest/archive/${V}${EXTRACT_SUFX}’ into ‘minetest-${V}${EXTRACT_SUFX}’.If ${DISTFILES} varies depending on FLAVORS or architecture, use
SUPDISTFILES
to ensure distfiles mirroring andmakesum
proper operation. DISTNAME
- Name used to identify the port. See
DISTFILES
andPKGNAME
. DISTORIG
- Suffix used by
distpatch
to rename original files. Defaults to .bak.orig. Distinct from .orig to avoid confusingupdate-patches
. DIST_SUBDIR
- Optional subdirectory of ${DISTDIR} where the current port's distribution
files and patchfiles will be located. See target
fetch
. DPB
- Set by the distributed ports builder to only get the information it needs
from
dump-vars
. ECHO_MSG
- User settings. Used to display ‘===> Configuring for foo’ and similar informative messages. Override to turn off, for instance.
ECHO_REORDER
- User settings. Set it to ‘echo’ to see
REORDER_DEPENDENCIES
actions. Silent by default. EPOCH
- Epoch number of the current package. Defaults to empty (no need for
numbering changes), then numbering starts at 0. Gets automatically
incorporated into
FULLPKGNAME
as ‘v${EPOCH}’ to form a full package-name conforming to packages-specs(7). ERRORS
- List of errors found while parsing the port's Makefile. Display the errors
before making any target, and if any error starts with "Fatal:",
do not make anything. For instance:
.if !defined(COMMENT) ERRORS+="Fatal: Missing comment" .endif
ERRORS
, for instance to flag erroneous combinations ofFLAVORS
(but seeONLY_FOR_ARCHS
NOT_FOR_ARCHS
andBROKEN
for other common issues). EXTRACT_CASES
- In the normal extraction stage (when
EXTRACT_ONLY
is not empty), this is the contents of a case statement, used to extract files. Fragments are automatically appended to extract tar, xz and zip archives, so that the default case is more or less equivalent to the following shell fragment:set -e cd ${WRKDIR} for archive in ${EXTRACT_ONLY} do case $$archive in *.tar.xz|*.tar.lzma) xzcat ${FULLDISTDIR}/$$archive| tar xf -;; *.tar.lz) lunzip -c ${FULLDISTDIR}/$$archive| tar xf -;; *.zip) unzip -q ${FULLDISTDIR}/$$archive -d ${WRKDIR};; *.tar.bz2|*.tbz2|*.tbz) bzip2 -dc ${FULLDISTDIR}/$$archive| tar xf -;; *.shar.gz|*.shar.Z|*.sh.Z|*.sh.gz) gzcat ${FULLDISTDIR}/$$archive | /bin/sh;; *.shar|*.sh) /bin/sh ${FULLDISTDIR}/$$archive;; *.tar) tar xf ${FULLDISTDIR}/$$archive;; *) gzip -dc ${FULLDISTDIR}/$$archive | tar xf -;; esac done
EXTRACT_ONLY
- Set to the list of distfiles to actually extract if some distfiles should
not be extracted during the
do-extract
stage. Defaults to all distfiles, can even be set to empty. EXTRACT_SUFX
- Used to set DISTFILES default value to ${DISTNAME}${EXTRACT_SUFX}. Default value is .tar.gz.
FAKE_FLAGS
- Extra flags passed to ${MAKE_PROGRAM} during the fake invocation. Empty by
default. Also see
ALL_FAKE_FLAGS
. FAKE_SETUP
- List of environment values normally set during fake invocations. Exposed
so that modules may provide their own
do-install
. Read-only, see THE FAKE FRAMEWORK section for details. FAKE_TARGET
- Target built by ${MAKE_PROGRAM} on fake invocation. Defaults to ${INSTALL_TARGET}.
FAKEOBJDIR
- User settings. If non empty, used as a base for the fake area. The real fake directory ${WRKINST} is created there. Can be set on a per-${PKGPATH} basis. For instance, setting FAKEOBJDIR_www/mozilla=/tmp/obj will affect only the mozilla port.
FETCH_CMD
- User settings. Command used to fetch distribution files for this port.
Defaults to ftp(1). Can be used to go through excessively paranoid
firewalls. Note that
FETCH_CMD
should support-C
and-o
dest. FETCH_MANUALLY
- Some ports' distfiles cannot be fetched automatically for licensing
reasons. In this case, set
FETCH_MANUALLY
to a list of strings that will be displayed, one per line, e.g.,FETCH_MANUALLY= "You must fetch foo-1.0.tgz" FETCH_MANUALLY+="from http://www.fubar.com/ manually," FETCH_MANUALLY+="after reading and agreeing to the license."
IS_INTERACTIVE
if some distribution files are missing. FETCH_PACKAGES
- User settings. If set to ‘Yes’, the
package
target will download packages missing from the repository from locations in ${PKG_PATH} and place them into ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/cache/. It will only build them if no suitable packages are found. FETCH_SYMLINK_DISTFILES
- User settings. Set to ‘Yes’ to link distribution files off
CDROM_SITE
instead of copying them. FILESDIR
- Location of other files related to the current port. Default: files.
FLAVOR
- The port's current options. Set by the user, and tested by the port to activate wanted functionalities.
FLAVORS
- List of all flavors keywords a port may match. Used to sort FLAVOR into a
canonical order to build the package name, or to select the packing-list,
and as a quick validity check. See also
PSEUDO_FLAVORS
. FLAVOR_EXT
- Canonical list of flavors being set for the current build, dash-separated.
See
FULLPKGNAME
. FORCE_UPDATE
- User settings. If set to ‘Yes’, the
update
target will always update an installed package, as soon as its signature differs, and all dependencies that install packages will also force an update. If set to ‘hard’, theupdate
target will also update installed packages even when the signature did not change. FULLDISTDIR
- Complete path to directory where ${DISTFILES} and ${PATCHFILES} will be located, to be used in hand-crafted extraction targets. Read-only.
FULLPKGNAME
- Full name of the created package, taking flavors into account. Defaults to
${PKGNAME}${FLAVOR_EXT}. See also
EPOCH
andREVISION
. FULLPKGPATH
- Path to the current port's directory, relative to ${PORTSDIR}, including flavors and subpackages. See pkgpath(7).
GCC3_ARCHS
,GCC4_ARCHS
- List of architectures using gcc 3.3.6, or gcc 4.2.1. Read-only. Use with
NOT_FOR_ARCHS
orONLY_FOR_ARCHS
to limit ports to architectures where they compile. GH_*
- Support for GitHub-hosted projects. Leave empty for non hosted projects.
Yields a suitable default for
MASTER_SITES_GITHUB
andDISTNAME
. GH_ACCOUNT
- Account name of the GitHub user hosting the project.
GH_COMMIT
- SHA1 commit id to fetch. It is an error to specify ${GH_COMMIT} when ${GH_TAGNAME} is specified.
GH_PROJECT
- Name of the project on GitHub.
GH_TAGNAME
- Name of the tag to download. Setting ${GH_TAGNAME} to master is invalid and will throw an error. ${WRKDIST} is auto-generated based on the ${GH_TAGNAME} if specified, otherwise ${GH_COMMIT} will be used to generate ${WRKDIST}.
GMAKE
- Location of the GNU make binary, if needed. Defaults to gmake.
HOMEPAGE
- URL to the homepage of the software, if applicable.
IGNORE
- For ignored ports, set to the reasons for which the port is ignored. If
non-empty, most common targets that do something (e.g.,
fetch
,build
,install
...) will be ignored. See alsoBATCH
,BROKEN
,FETCH_MANUALLY
,IGNORE_IS_FATAL
,IGNORE_SILENT
,INTERACTIVE
,IS_INTERACTIVE
,NOT_FOR_ARCHS
,NO_IGNORE
,ONLY_FOR_ARCHS
. IGNORE_IS_FATAL
- User settings. If set to ‘Yes’, ignored ports will become fatal errors.
IGNORE_SILENT
- User settings. If set to ‘Yes’, do not print anything when ignoring a port.
INSTALL_{PROGRAM,SCRIPT,DATA,MAN}[_DIR]
- Macros to use to install a program, a script, data, or a man page (or the corresponding directory), respectively.
INSTALL_TARGET
- Target invoked to install the software, during fake installation. Default is ‘install’.
INTERACTIVE
- User settings. Set to ‘Yes’ to skip all non-interactive
ports. Used in conjunction with
BATCH
to simplify bulk-package builds. IS_INTERACTIVE
- Set to ‘Yes’ if port needs human interaction to build.
Porters should strive to minimize
IS_INTERACTIVE
ports, by usingFLAVORS
for multiple choice ports, and by postponing human intervention to package installation time. LE_ARCHS
- Set to the list of little-endian architectures. Read-only. Use with
NOT_FOR_ARCHS
andONLY_FOR_ARCHS
. LIB_DEPENDS
- Libraries this port depends upon. Each item has the form
‘[pkgspec:]pkgpath’. Similar to
BUILD_DEPENDS
andRUN_DEPENDS
, but with specific rules:LIB_DEPENDS
always turn intoBUILD_DEPENDS
.On architectures that use dynamic libraries,
LIB_DEPENDS
is also used as a run-time dependency, and recorded in the package as such, if any of the libraries mentioned inWANTLIB
is a shared library that originates within the dependent port.See library-specs(7) for more details.
lib_depends_args
- Controls the behavior of
pkg_create(1) related targets, see
print-package-args
for details. LIBTOOL
- Location of the libtool binary. Default: /usr/bin/libtool.
LIBTOOL_FLAGS
- Arguments to pass to libtool. If USE_LIBTOOL is set, the environment variable LIBTOOL is set to ${LIBTOOL} ${LIBTOOL_FLAGS}.
LOCALBASE
- where other ports have already been installed. Default: /usr/local.
LOCALSTATEDIR
- Location for this port's state directory, should always be derived from
BASELOCALSTATEDIR
, which defaults to /var. Passed to gnu configure scripts. LOCKDIR
- User settings. Defaults to ${WRKOBJDIR}/locks. If set, points to a local directory common for all instances of concurrent ports builds.
LOCK_CMD
- Expands to a command that will acquire a lock, namely dolock(1). See also ports(7).
LOCK_VERBOSE
- User settings. Defaults to ‘No’. Set to ‘Yes’ to show every acquire/release lock operation.
LP64_ARCHS
- Set to the list of 64-bit architectures. Read-only. Use with
NOT_FOR_ARCHS
. MAINTAINER
- Email address with full name of the port's maintainer. Defaults to ports@openbsd.org.
MAKE_ENV
- Environment variables passed to make invocations and tests. Sets at least PATH, PREFIX, LOCALBASE, X11BASE, CFLAGS, TRUEPREFIX, DESTDIR, and the BSD_INSTALL_* macros.
MAKE_FLAGS
- Flags used for all make invocations, except for the
fake
stage, which addsFAKE_FLAGS
(seeALL_FAKE_FLAGS
) and for thetest
stage, which addsTEST_FLAGS
(seeALL_TEST_FLAGS
). MAKE_FILE
- Name of the Makefile used for ports building. Defaults to Makefile. Used after changing directory to ${WRKBUILD}.
MAKE_PROGRAM
- The make program that is used for building the port. Set to ${MAKE} or ${GMAKE} depending on USE_GMAKE. Read-only.
MAKEFILE_LIST
- Introspection variable, see make(1).
MAKESUMFILES
- List of all files that need to be retrieved by
fetch-all
, withDIST_SUBDIR
prepended and with master site selection extension removed. Read-only. See alsoCHECKSUMFILES
. MASTER_SITE_BACKUP
- User settings. List of sites to try after normal master sites, or before
if
MASTER_SITE_OVERRIDE
is set to ‘Yes’. Normally includes ${MASTER_SITE_OPENBSD} and ${MASTER_SITE_FREEBSD}. MASTER_SITE_*
- Lists of standard sites to retrieve files from, refer to ${PORTSDIR}/infrastructure/templates/network.conf.template.
MASTER_SITE_OVERRIDE
- User settings. Set to ‘Yes’ to retrieve distfiles and patchfiles preferentially from the ${MASTER_SITE_BACKUP} sites. Defaults to ‘No’.
MASTER_SITES
- List of primary locations from which distribution files and patchfiles are
retrieved. See the
fetch
target for details. Defaults to ${MASTER_SITES_GITHUB} for GitHub-hosted projects, seeGH_*
. See ports(7) for user configuration. MASTER_SITES0
,...
,MASTER_SITES9
- Supplementary locations from which distribution files and patchfiles are retrieved.
MESSAGE
- File recorded in the package and displayed during installation. Defaults to ${PKGDIR}/MESSAGE if this file exists. Leave empty if no message is needed.
MISSING_FILES
- When
FETCH_MANUALLY
is set,MISSING_FILES
will contain the list of missing distfiles or patchfiles that need to be fetched manually. Read-only. MTREE_FILE
- mtree(8) specification to check when creating a PLIST with the
update-plist
target.MTREE_FILE
can hold a list of file names, to which ${PORTSDIR}/infrastructure/db/fake.mtree is always appended. These specifications are rooted at ${WRKINST}, and are subject toSUBST_VARS
substitution, to ease ${PREFIX} independence. This feature is primarily intended for large, interconnected ports, such as the kde suite, where a base package sets up a large, extra directory hierarchy that would make the manual checking of packing lists tedious. MODGNU_CONFIG_GUESS_DIRS
- If a port uses config.guess outside WRKSRC, the directories containing the other copies must be set here.
MODPERL_ADJ_FILES
- If any files have a Perl shebang line, which needs to be replaced with
“#!/usr/bin/perl”, list them in
MODPERL_ADJ_FILES
. File paths here should be relative toWRKSRC
. These files are patched automatically at the end ofpre-configure
. MODPERL_BIN_ADJ
- Shell fragment to patch the Perl interpreter path in executable scripts.
Used by
MODPERL_ADJ_FILES
. MODPERL_BUILD_TARGET
- Normal content of
do-build
whenCONFIGURE_STYLE
uses perl. Provided as a separate variable if a port wants to overridedo-build
for its own reasons. MODPERL_INSTALL_TARGET
- Likewise for
do-install
. MODPERL_TEST_TARGET
- Likewise for
do-test
. MODULES
- External modules mechanism, documented separately. Modules such as
‘imake’ and ‘gnu’ are normally included
automatically with the right
CONFIGURE_STYLE
. Note that it is possible toCONFIGURE_STYLE = simple
,MODULES += gnu
to just get the effects ofCONFIG_SITE
andMODGNU_CONFIG_GUESS_DIRS
along with the defaultTEST_TARGET
, in case the normal GNU configure script was wrapped in a separate script that takes different arguments. See port-modules(5). MULTI_PACKAGES
- Set to a list of subpackage extensions for ports that create multiple
packages. See FLAVORS AND
MULTI_PACKAGES below. Especially read the part about
ONLY_FOR_ARCHS
when some of the packages only exist for some architectures. - NO_ARCH
- Location for arch-independent packages. Defaults to ‘no-arch’. Normally, packages are generated under ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}, except for packages where PKG_ARCH=*, which end up under ${PACKAGE_REPOSITORY}/${NO_ARCH}.
NOT_FOR_ARCHS
- List of architectures on which this port does not build. See also
ONLY_FOR_ARCHS
. See alsoSHARED_ONLY
. Do not use instead ofSHARED_ONLY
without very good reasons. NO_BUILD
- Set to ‘Yes’ if port does not need any build stage.
NO_CCACHE
- Set to ‘Yes’ to prevent ccache from being used when building
a certain port, even when
USE_CCACHE
is set. NO_CHECKSUM
- User settings. Set to ‘Yes’ to avoid
checksum
,makesum
, andaddsum
actions entirely. Beware of the full implications of this mechanism, namely that it disables the basic authentication mechanisms of the ports tree entirely. NO_DEPENDS
- User settings. Don't verify build of dependencies. Do not use in any ports Makefile. This is only meant as a user convenience when, e.g., you just want to browse through a given port's source and do not wish to trigger the build of dependencies.
NO_IGNORE
- User settings. If set to ‘Yes’, avoid ignoring a port for
the usual reasons. Use, for instance, for fetching all distribution files,
or for fixing a broken port. See also
IGNORE
andTRY_BROKEN
. NO_TEST
- Port does not have any regression tests. Only set to ‘Yes’ for ports with no regression test. It should be left alone for ports with empty regression tests, and for ports with failing tests. That way, if a subsequent update of a port acquires actual regression tests, they will be picked up automatically.
NO_SHARED_ARCHS
- Set to the list of platforms that do not support shared libraries.
Read-only. Use with
NOT_FOR_ARCHS
. NO_SHARED_LIBS
- Set to ‘Yes’ if platform does not support shared libraries.
To be tested after including
bsd.port.mk
, or bsd.port.arch.mk(5), if neither PFRAG.shared nor CONFIGURE_SHARED are enough. NO_SYSTRACE
- Port does not build with systrace-enabled build targets.
OLD_WRKDIR_NAME
- Base name for
WRKDIR
in the old scheme withoutWRKOBJDIR
. Mostly used as a value forWRKDIR_LINKNAME
, e.g.,WRKDIR_LINKNAME = ${OLD_WRKDIR_NAME}
in /etc/mk.conf. Read-only.
ONLY_FOR_ARCHS
- List of architectures on which this port builds. Can hold both processor-specific information (e.g., powerpc), and more specific model information (e.g., macppc). This is subpackage dependent. Read the corresponding part of FLAVORS AND MULTI_PACKAGES if some subpackages should only be built on some architectures.
OSREV
- Revision number of OpenBSD. Read-only.
PACKAGE_REPOSITORY
- User settings. Location for built packages. Defaults to
${PORTSDIR}/packages. See
package
for details. PATCH
- Command to use to apply all patches. Defaults to /usr/bin/patch.
PATCHORIG
- Suffix used by
patch
to rename original files, andupdate-patches
to re-generate ${PATCHDIR}/${PATCH_LIST} by looking for files using this suffix. Defaults to .orig. For a port that already contains .orig files in the ${DISTFILES}, set this to something else, such as .pat.orig. See alsodistpatch
,DISTORIG
. PATCH_CASES
- In the normal
distpatch
stage (whenPATCHFILES
is not empty), this is the contents of a case statement, used to apply distribution patches. Fragments are automatically appended to handle gzip'ed, bzip'ed and lzip'ed patches, so that the default case is more or less equivalent to the following shell fragment:set -e cd ${FULLDISTDIR} for patchfile in ${_LIST_PATCHFILES} do case $$patchfile in *.bz2) bzip2 -dc $$patchfile | ${PATCH} ${PATCH_DIST_ARGS};; *.lz) lunzip -c $$patchfile | ${PATCH} ${PATCH_DIST_ARGS};; *.Z|*.gz) gzcat $$patchfile | ${PATCH} ${PATCH_DIST_ARGS};; *) ${PATCH} ${PATCH_DIST_ARGS} <$$patchfile;; esac done
PATCHDIR
- Location for patches applied by the
patch
target. Default: patches. PATCHFILES
- Files to fetch from the master sites like
DISTFILES
, but serving a different purpose, as they hold distribution patches that will be applied at thepatch
stage. See alsoSUPDISTFILES
. PATCH_ARGS
- Full list of options used while applying port's patches.
PATCH_CHECK_ONLY
- Set to ‘Yes’ by the
checkpatch
target. Don't touch unless the defaultcheckpatch
target needs to be redefined. Ideally, user-defined patch subtargets ought to test checkpatch. In practice, they don't. PATCH_DEBUG
- If set to ‘Yes’, the
patch
stage will output extra debug information. PATCH_DIST_ARGS
- Full list of options used while applying distribution patches.
PATCH_DIST_STRIP
- Patch option used to strip directory levels while applying distribution patches. Defaults to -p0 .
PATCH_LIST
- Wildcard pattern of patches to select under ${PATCHDIR}. Defaults to
patch-*. Note that filenames ending in .orig, or ~ are never applied. Note
that
PATCH_LIST
can hold absolute pathnames, for instance to share patches among similar ports:PATCH_LIST=${PORTSDIR}/x11/kde/libs2/patches/p-* patch-*
PATCH_STRIP
- Patch option used to strip directory levels while applying port's patches. Defaults to -p0 .
PERMIT_DISTFILES_FTP
,PERMIT_PACKAGE_CDROM
,PERMIT_PACKAGE_FTP
- Set to ‘Yes’ if package or distribution files can be allowed
on FTP sites or CD-ROM without legal issues. Set to reason not to
otherwise. PERMIT_* lines in the Makefile should be preceded with a
comment explaining details about licensing and patents issues the port may
have. Porters must be very thorough in their checks. In case of doubt,
ask.
If
PERMIT_PACKAGE_CDROM
is set to ‘Yes’,PERMIT_PACKAGE_FTP
andPERMIT_DISTFILES_FTP
will default to ‘Yes’.If
PERMIT_PACKAGE_FTP
is set to ‘Yes’,PERMIT_DISTFILES_FTP
will default to ‘Yes’. PKG_ADD
- User settings. Path to pkg_add(1) command, with possible options.
PKG_ARCH
- Comma-separated list of architectures on which this package may install. Defaults to ${MACHINE_ARCH},${ARCH}. Use * for arch-independent packages.
PKG_ARGS
- Special arguments to pass to pkg_create(1), in addition to the default ones. For mips64 and pic libraries, see THE GENERATION OF PACKAGE INFORMATION.
PKG_CREATE
- User settings. Path to
pkg_create(1) command, with possible options. Signing
options should be set separately in
SIGNING_PARAMETERS
. PKG_CREATE_NO_CHECKS
- Porters switch. Set to ‘Yes’ to avoid checking the ports
tree when solving
WANTLIB
(seewantlib-args
). May result in bogus packages that mix@depends
lines obtained from the ports tree with@wantlib
lines that come from the installed system. Set to ‘Warn’ to have the differences printed as a warning instead of an error (the default). PKG_DBDIR
- User settings. Path to package installation records. Defaults to /var/db/pkg.
PKG_DELETE
- User settings. Path to pkg_delete(1) command, with possible options.
PKG_INFO
- User settings. Path to pkg_info(1) command, with possible options.
PKG_TMPDIR
- See pkg_add(1). Normally points to /var/tmp, as per default.
PORTHOME
- Setting of env variable
HOME
for most shell invocations. Default will trip ports that try to write into $HOME while building. PORTPATH
- Path used by most shell invocations. Don't override unless really needed.
PORTSDIR
- Root of the ports tree (default: /usr/ports).
PORTSDIR_PATH
- Path used by dependencies and bsd.port.subdir.mk to look up package specifications. Defaults to ${PORTSDIR}:${PORTSDIR}/mystuff.
PKGDIR
- Location for packaging information (packing list, port description, messages). Default: pkg.
PKGFILE
- Full path to the created package for the given subpackage. Read-only.
PKGFILES
- Full path to all created packages. Read-only.
PKGNAME
- Name of the created package. Default is ${DISTNAME}. This does not take
flavors into account. See
FULLPKGNAME
for that. Specific revisions and epoch changes should be handled byREVISION
andEPOCH
instead. PKGNAMES
- Read-only. List of all package names generated by the port, with
FLAVORS
andBUILD_PACKAGES
taken into account. Mostly used as ‘make show=PKGNAMES
’ to verify that bumped package names are correct. PKGNAME-foo
- Package name for sub-package foo, if the default value of ${PKGNAME}${SUBPACKAGE} is not appropriate.
PKGPATH
- Path to the current port's directory, relative to ${PORTSDIR}. Read-only.
PKGPATHS
- Read-only. List of all package paths generated by the port, with
FLAVORS
andMULTI_PACKAGES
taken into account. Order matchesPKGNAMES
exactly. PKGSPEC
- Default package spec for using this port as a dependency. Defaults to
‘stem-*’, derived from the
FULLPKGNAME
. Do not override without very good reasons, namely software that coexist as different incompatible versions with the same stem, e.g., already a mess. PLIST_DB
- User settings. Directory used to save generated packing-lists, as
persistent information. Packing-lists are processed by a script,
register-plist(1), which complains when packing-lists
change without a
REVISION
bump. It also knows enough about package version numbers when something in the package or its dependencies goes backward, thus catchingEPOCH
issues. This directory is never cleaned during normal operation. ‘make clean=plist
’ should only ever be used during debugging by port maintainers. Defaults to ${PORTSDIR}/plist/${MACHINE_ARCH}. If set to empty, will not register anything: very much unsafe. PORTS_BUILD_XENOCARA_TOO
- EXPERIMENTAL. Set to ‘Yes’ to build xenocara through ports. This is highly experimental and not recommended.
PORTROACH
- Controls the behavior of misc/portroach as documented in detail at http://jasperla.github.io/portroach/docs/portroach-portconfig.txt .
PREFERRED_CIPHERS
- List of cryptographic ciphers to use, in order of preference. Default is ‘sha256’. The first cipher that matches in ${CHECKSUM_FILE} is verified.
PREFIX
- Base directory for the current port installation. Usually ${LOCALBASE}, though some ports may elect a location under ${VARBASE}, and some multi-package ports may install under several locations. Additionally, firmware files generally install under ${BASESYSCONFDIR}.
PREPARE_CHECK_ONLY
- Build settings. Prevent the
prepare
stage from installing anything, let it just check dependencies, and handle [:target] dependencies. Mostly used by dpb(1), which already installs everything before runningprepare
. PROGRESS_METER
- User-settings. Defaults to ‘Yes’. Forces commands like ftp(1) and pkg_create(1) to use their progress-meter even in the absence of a terminal.
PROPERTIES
- List of properties specific to a given machine architecture. Most often
obtained through
bsd.port.arch.mk(5). These can be checked like this
.include <bsd.port.arch.mk> .if ${PROPERTIES:Mapm} # then add build options specific to apm arches ... .if !${PROPERTIES:Mlp64} # build options specific to lp32 arches ...
MULTI_PACKAGES
setup, use ofONLY_FOR_ARCHS-sub
andBUILD_PACKAGES
is generally preferred (and simpler). Possible properties include- apm
- architecture possesses suspend (apm) support.
- be
- architecture is big-endian.
- gccN
- gccN architecture.
- elf
- elf(5) architecture.
- le
- architecture is little-endian.
- lp64
- lp64 architecture.
- no_shared
- architecture has no shared library support.
- llvm
- there is lang/llvm support on this architecture.
- mono
- there is lang/mono support on this architecture.
PSEUDO_FLAVOR
- List of flavors in
FLAVOR
that are actually pseudo-flavors. Only for introspection purposes. Read-only. PSEUDO_FLAVORS
- Extra list of flavors that do not register in package names, but are still
used to control build logic, and work directory names. Its only use should
be for disabling part of a multi-packages build, for instance:
FLAVOR=no_gnome make package
Pseudo-flavors should be named as ‘no_something’ to disable the build of subpackage ‘-something’ (and possibly some others, by restricting
BUILD_PACKAGES
). Pseudo-flavors should always be handled through bsd.port.arch.mk(5). A pseudo-flavor can remove several subpackages through the following construct.# pseudo-flavor no_gui will also remove gtk and gtk3 MULTI_PACKAGES = -main -gtk -gtk3 -gui # ... .include <bsd.port.arch.mk> # remove extra build components .if !${BUILD_PACKAGES:M-gui} BUILD_PACKAGES := ${BUILD_PACKAGES:N-gtk:N-gtk3} .endif # normal configure setup, e.g., .if ${BUILD_PACKAGES:M-gtk} # ...
Caveat: creation of a separate working directory is mandatory for a pseudo-flavor. If, at a later time, a full build with all subpackages is required, all the work will need to be done again.
See also
BUILD_ONCE
. RCDIR
- Location for daemon startup scripts. Defaults to /etc/rc.d. Do not change.
RECURSIVE_FETCH_LIST
- See mirroring-ports(7).
REFETCH
- User settings. If set to true,
checksum
will analyze ${CHECKSUM_FILE}, and try retrieving files with the correct checksum off ftp.openbsd.org, in the directory /pub/OpenBSD/distfiles/$cipher/$value/$file. REORDER_DEPENDENCIES
- Points to a list of files that specify inter-dependencies for
make(1). If defined, each line of the file is either a comment
(starting with #) or a pair of two files: most_recent older. At the end of
post-patch
, touch(1) will be used to ensure those files are put in the proper order. The files are assumed to be under ${WRKSRC}. The notation /file can be used to ask for a recursive search, e.g., to make sure that all Makefile.in are up-to-date. See ${PORTSDIR}/infrastructure/mk/automake.dep for an example. REPORT_PROBLEM
- See ports(7).
REPORT_PROBLEM_LOGFILE
- See ports(7).
REVISION
- Revision number of the current package. Defaults to empty (very first
package), then numbering starts at 0. Gets automatically incorporated into
FULLPKGNAME
as ‘p${REVISION}’ to form a full package-name conforming to packages-specs(7). RUN_DEPENDS
- Specification of ports this port needs installed to be functional. Same
format as
LIB_DEPENDS
. The corresponding packages will be built right before theinstall
stage, and pkg_add(1) will take care of installing them. SEPARATE_BUILD
- Many GNU configure ports can be built in a directory distinct from the place they were unpacked. For some specific ports, this is even mandatory. Set to ‘yes’ or ‘simple’ if this is the case. The ports infrastructure will generate a separate ${WRKBUILD} directory in which the port will be configured and built. Wipe ${WRKBUILD} to start anew, but skipping the extract/patch stage.
SETENV
- Normally set to
/usr/bin/env -i
. Prepended to every command invocation that requires a clean environment. Do not override. SHARED_LIBS
- List of shared libraries that the port may build, as a list of the form
‘libname’ ‘libversion’. Used to set variables
of the form
LIBlibname_VERSION
that are then used for substitution by pkg_create(1). The porter is responsible for making sure the port uses those version numbers when shared libraries are built.The intent is that the OpenBSD ports system must have control over shared library versions because of global changes that may require bumping the major version of every shared library in the system, or simply because the third party programmers do not understand the rules for shared library versions, thus breaking the update mechanism. For that reason it is advised to set libversion to 0.0 when first importing a port.
Porters of software using libtool should make sure
MAKE_FLAGS
get propagated to the libtool invocations. This should be enough in most cases. SHARED_ONLY
- Set to ‘Yes’ if port can only be built on architectures with shared libraries.
SIGNING_PARAMETERS
- User settings. Set to pkg_create(1) options for signing packages directly during their creation.
SKIPDIR
- See ports(7).
STATIC_PLIST
- Normally set to ‘yes’. Can be set to no for ports that do not have a static plist. Do not change without a very good reason. Note that the only good reason to not have a static plist is for ports such as databases/ports-readmes which actually build a bunch of files depending on the current ports tree. This breaks all introspection mechanisms within the ports tree, including databases/pkglocatedb which will not include that port.
STARTAFTER
- See ports(7).
STARTDIR
- See ports(7).
SUBPACKAGE
- Set to the subpackage suffix when building a package in a multi-package port. Read-only. Used to test for dependencies or to adjust the package name.
SUBST_CMD
- A command that can be used to perform
SUBST_VARS
substitution on arbitrary files. In normal mode,${SUBST_CMD} file1 file2 ...
will substitute files in place, creating backup copies of them. In copy mode,
${SUBST_CMD} -c src1 dest1 src2 dest2
will copy files over while performing the substitution, as suitable for copying template files over from ${FILESDIR} to ${PREFIX}, for instance. This uses pkg_subst(1) with suitable parameters. Read-only.
${SUBST_CMD} can be used like install(1):
to set file owner, group and/or mode.${SUBST_CMD} [
-g
group] [-o
owner] [-m
mode] file...Note that
SUBST_CMD
is not really appropriate when variables have subpackage variations, likePREFIX
orFULLPKGNAME
. Use the appropriateSUBST_CMD-sub
instead. SUBST_CMD-sub
SUBST_CMD
with subpackage-dependent semantics, like packing-list substitution. It will substitute the right variable depending on the desired subpackage, e.g.,SUBST_CMD-foo
will substitute the value ofFULLPKGNAME-foo
for${FULLPKGNAME}
.SUBST_DATA
,SUBST_MAN
,SUBST_PROGRAM
- Specialized versions of
SUBST_CMD
that use-c
and appropriate owner/group/mode for data, manpages and programs respectively. SUBST_VARS
- Make variables whose values get substituted to create the actual package
information. Always holds
ARCH
,BASE_PKGPATH
,FLAVOR_EXT
,FULLPKGNAME
,HOMEPAGE
,LOCALBASE
,MACHINE_ARCH
,MAINTAINER
,PREFIX
,RCDIR
,SYSCONFDIR
,TRUEPREFIX
, andX11BASE
. The special construct ‘${FLAVORS}’ can be used in the packing-list to specify the current list of dash separated flavors the port is compiled with (useful for cross-dependencies inMULTI_PACKAGES
). Add other variables as needed. Some variable names are prefixed by a ^. This is only relevant forupdate-plist
, where it means the variable will only be substituted at the beginning of a path. SUDO
- User settings. If set to doas(1) in mk.conf(5), the ports tree will only invoke root's privileges for the parts that really require it.
SUPDISTFILES
- Supplementary files that need to be retrieved under some specific
circumstances. For instance, a port might need architecture-specific
files.
SUPDISTFILES
should hold a list of all distribution files and patchfiles that are not always needed, so that a mirror will be able to grab all files, or thatmakesum
will work. Having an overlap betweenSUPDISTFILES
andDISTFILES
,PATCHFILES
is admissible, and in fact, expected, as it is much simpler to build an error-free list of files to retrieve in that way. See the xanim port for an example. SYSCONFDIR
- Location for this port's configuration files, should always be derived
from
BASESYSCONFDIR
, which defaults to /etc. Passed to gnu configure scripts and substituted in PLISTs. SYSTRACE_FILTER
- Location of the systrace filter file which is the basis for a port's actual systrace policy file. Defaults to ${PORTSDIR}/infrastructure/db/systrace.filter.
SYSTRACE_FILTER_CCACHE
- Location of the supplementary systrace filter file which is used when
USE_CCACHE
is enabled. Defaults to ${PORTSDIR}/infrastructure/db/systrace.filter.ccache. SYSTRACE_SUBST_VARS
- List of variables used in ${SYSTRACE_FILTER} that will be substituted by
their real value when creating the systrace policy file. Always holds
WRKOBJDIR
,PORTSDIR
, andDISTDIR
. TAR
- Name of the tar binary.
TARGETS
- Read-only. Set to the list of special targets for a port
(
{pre,do,post}-*
and module hooks). Used by introspection tools such as the sqlports package. TEMPLATES
- Base location for the templates used in the
readmes
target. User settings. Defaults to ${PORTSDIR}/infrastructure/templates. TEST_DEPENDS
- See
BUILD_DEPENDS
for specification. Test dependencies are only checked if thetest
stage is invoked. TEST_ENV
- Additional environment variables passed to tests. Empty by default.
TEST_FLAGS
- Extra flags passed to ${MAKE_PROGRAM} to run the regression tests. Empty by default.
TEST_IS_INTERACTIVE
- Set to ‘Yes’ if port needs human interaction to run its tests, or set to ‘X11’ if the tests need an active X11 display to work.
TEST_LOG
- Command used to log the results of regression tests to TEST_LOGFILE.
TEST_LOGFILE
- Log file containing the results of regression tests.
TEST_TARGET
- Target to run regression tests. Defaults to ‘regress’,
except for ‘perl’ and ‘gnu’
CONFIGURE_STYLE
, which default to ‘test’ and ‘check’, respectively. TRUEPREFIX
- Read-only. Mostly the same as ${PREFIX}, except it never gets ${DESTDIR}
prepended during
fake
. Refer to THE FAKE FRAMEWORK section for details. TRY_BROKEN
- User settings. If set to ‘Yes’, don't set
IGNORE
forBROKEN
ports, so that we will attempt to build them. UNLOCK_CMD
- User settings. If set, expands to a command that will release a lock. This lock will reside in ${LOCKDIR}.
UNMESSAGE
- File recorded in the package and displayed during deinstallation. Defaults to ${PKGDIR}/UNMESSAGE if this file exists. Leave empty if no message is needed.
UNZIP
- Name of the unzip binary.
UPDATE_COOKIES_DIR
- User settings. Used to store cookies for package updates and defaults to ${PORTSDIR}/update/${MACHINE_ARCH}. If set to empty, will revert to a file under ${WRKDIR}.
USE_CCACHE
- User settings. Set to ‘Yes’ to use ccache when building ports. Adds a build dependency on devel/ccache, and sets up the build environment so that it is used.
USE_GMAKE
- Set to ‘Yes’ if GNU make (${GMAKE}) is needed for correct behavior of this port.
USE_GROFF
- Set to ‘Yes’ to use groff to build manpages. This sets groff as a build dependency, and also tells pkg_create(1) to format manpages behind the scene using groff while building packages.
USE_LIBTOOL
- Defaults to ‘Yes’. Set to ‘gnu’ if the base libtool(1) is insufficient and GNU libtool is required. Set to ‘No’ to disable the use of libtool(1) entirely; this should not be set under normal circumstances. Adds dependencies if necessary, and passes LIBTOOL environment variable to scripts invocations.
USE_MFS
- Set to ‘Yes’ to build ports under an MFS filesystem (see
mount_mfs(8)). Mostly for use by
dpb(1) and not intended to be a user setting. See
WRKOBJDIR_MFS
for configuration. USE_SYSTRACE
- User settings. Set to ‘Yes’ to protect port building with systrace.
USE_X11
- Normally, presence of ${X11BASE} is enforced by default for building
ports. But there is an experimental way to hook the xenocara build into
dpb(1), which requires knowing whether a port requires X11 to
already be there.
The infrastructure mostly sets
USE_X11
automatically based onWANTLIB
values, there are a few ports (about 20) that require X11 components without any library telltale. VARBASE
- User settings. Base location for ports that install stuff outside of ${LOCALBASE}. Defaults to /var.
WANTLIB
- Extra list of library specifications that a package will need. May include
system and X11 libraries. See
library-specs(7) for more details.
As a special extension,
WANTLIB
may include absolute paths, e.g., ${LOCALBASE}/lib/expat.=4 to distinguish between base libraries and port libraries. Use with caution, this is very seldom needed. wantlib_args
- Controls the behavior of
pkg_create(1) related targets, see
print-package-args
for details. WARNINGS
- User settings. If set to ‘Yes’, add
CDIAGFLAGS
toCFLAGS
andCXXDIAGFLAGS
toCXXFLAGS
. WRKBUILD
- Subdirectory of ${WRKDIR} where the actual build occurs. Defaults to ${WRKSRC}, unless SEPARATE_BUILD is involved, in which case it is set to an appropriate value.
WRKCONF
- Subdirectory of ${WRKDIR} where the actual configure set occurs. Defaults to ${WRKBUILD}.
WRKDIR
- Location where all port activity occurs. Apart from the actual port, may
hold all kinds of cookies that checkpoint the port's build. Read-only.
Note that WRKDIR may be a symbolic link. During ports building,
${WRKDIR}/bin is put at the front of the
PATH
. WRKDIR_LINKNAME
- Name of a symbolic link to create within the port directory which will
point to the port's ${WRKDIR}. See
OLD_WRKDIRNAME
. WRKDIST
- Subdirectory of ${WRKDIR} in which the distribution files normally unpack. Base for all patches. Defaults to ${WRKDIR}/${DISTNAME}. Note that WRKDIST may be a symbolic link, if set to ${WRKDIR}.
WRKSRC
- Subdirectory of ${WRKDIR} where the actual source is. Base for configuration (default: ${WRKDIST}). Note that WRKSRC may be a symbolic link, if set to ${WRKDIR}.
WRKINST
- Subdirectory of ${WRKDIR} where port normally installs (see the
fake
target). WRKOBJDIR
- Used as a base for the actual port working directory. Defaults to ${PORTSDIR}/pobj. The real working directory ${WRKDIR} is created there. Can be set on a per-${PKGPATH} basis. For instance, setting WRKOBJDIR_www/mozilla=/tmp/obj will affect only the mozilla port. If explicitly unset (WRKOBJDIR=), the working directory is created within the port directory.
WRKOBJDIR_MFS
- Alternate location for the port working directory. The intent is to use an
MFS based filesystem for small ports with
dpb(1). Active when
USE_MFS
is ‘Yes’. Defaults to /tmp/pobj. X11BASE
- Where X11 has been installed. Default: /usr/X11R6.
XAUTHORITY
- Points to a suitable authority file for X11 interactive regression tests. Defaults to ${HOME}/.xauthority.
XMKMF
- Invocation of xmkmf for a
CONFIGURE_STYLE=imake
port. Defaults to xmkmf -a -DPorts. The -DPorts is specific to OpenBSD and is always appended. YACC
- Name of yacc program to pass to GNU-configure, defaults to yacc. GNU-configure would always try to use bison otherwise, which leads to unreproducible builds. Set to bison if needed.
DIAGNOSTICS
Note that some of these messages are actually emitted by some other external commands, but grouped here for convenience: easier to look for in dpb(1)'s logs.
- Discovered old directory in ...
- This message comes from make-plist(1). A directory was found in the PLIST that used to be needed but is no longer, because it's now accounted for through dependencies. Indicates the old directory has been removed.
- Error: change in plist between ...
- Error message comes from register-plist(1).
- Error: duplicate item in packing-list
- Error message comes from
pkg_create(1), and will result from incorrect
packing-lists, such as including several fragments with the same file, or
having incorrect
PKG_ARGS-sub
. - Error: Libraries in packing-lists...and libraries from installed packages don't match
- The ports tree and the installed packages are out-of-sync. Mixing library
information from both sources might produce packages that can't be
installed elsewhere. Cleanest fix is to update the out-of-date source
(e.g., update the ports tree, or build and install new packages).
Developers may use
PKG_CREATE_NO_CHECKS
instead, assuming they understand the implications. Seeprint-package-args
(wantlib-args
) for details. - Fatal: can't flavor a SUBDIR
- A dependency mentions top_subdir,flavor. Flavor would then be ignored, as it is only applied to individual ports.
- Fatal: can't subpackage a SUBDIR
- A dependency mentions top_subdir,-sub. Subpackage would then be ignored, as it is only applied to individual ports.
- Fatal: flavor should never start with a digit
- This would utterly confuse pkg_add(1). See packages-specs(7).
- Fatal: inclusion of <file> from <file>
- bsd.port.mk or
bsd.port.subdir.mk has been included from a
MODULE
or from Makefile.inc, resulting in a double inclusion. This would lead to weird results, such asPKG_ARGS
being defined twice. - Fatal: SUBPACKAGES should always begin with -: <offending list>
- That is the only way to differentiate between
FLAVOR
andSUBPACKAGE
in pkgpath(7) specifications. - Fatal: building ports requires correctly installed X11
- All file sets of the base OS, including xenocara, must be installed before building ports.
- Fatal: /usr/local/lib/X11/app-defaults should exist and be a symlink
- /usr/local/lib/X11/app-defaults is distributed as a symlink in the xshare*.tgz file set. If xenocara was not fully installed before packages were added, it may have been created as a directory instead.
- Fatal: the licensing info for <pkgname> is incomplete...
- Every port must have explicit defines of all
PERMIT_*
values. - Fatal: Use 'env FLAVOR=flavor make' instead
- Arguments specified after
make(1) are hardcoded for all recursive sub-makes, and very
difficult to override. Thus,
FLAVOR
must be specified in the environment instead. - Fatal: Use 'env SUBPACKAGE=-sub make' instead
- Arguments specified after
make(1) are hardcoded for all recursive sub-makes, and very
difficult to override. Thus,
SUBPACKAGE
must be specified in the environment instead. - ldconfig: <dir>: No such file or directory
- Usually produced by
pkg_add(1) running
ldconfig(8). Some tools such as GNU libtool will add directories
living under ${WRKINST} to the shared library path
during the
fake
stage. Of course, ldconfig(8) will later complain after the directory no longer exists. The bogus tool should be fixed to conform to OpenBSD usage. - LIB_DEPENDS <spec> not needed for <FULLPKGPATH>
- There doesn't seem to be any WANTLIB to match the given LIB_DEPENDS. Thus,
the LIB_DEPENDS won't turn into a @depends line in the created package.
This is often because of confusion between LIB_DEPENDS and RUN_DEPENDS:
RUN_DEPENDS is needed for dlopen'd libraries.
Might be intentional sometimes, if some compile flavors create static binaries, for instance. Also, will happen for multi-packages, where one sets LIB_DEPENDS to have a given build dependency (and corresponding WANTLIB for a given SUBPACKAGE).
See
print-package-args
(lib-depends-args
) for details. - Warning: FULLPKGNAME-sub defined but not FULLPKGPATH-sub
FULLPKGNAME-sub
has been explicitly defined by the port, instead of relying on the default, but no value ofFULLPKGPATH-sub
has been given. This is often an error.- Warning: symlink(s) point to non existent file.
- Warning message comes from
pkg_create(1). The symlink resides in the fake area, under
${WRKINST}. This is only a warning because the
symlink may point to a run-time dependency, which obviously won't exist
under ${WRKINST} at the time
‘
make package
’ is run. - Warning: @option no-default-conflict with no @conflict
- Warning message comes from
pkg_create(1). Most packages that waive
"default-conflict" will have explicit conflict markers instead.
Otherwise, the package will only conflict with the exact same version,
with some possible
REVISION
bumps. Any other version orFLAVOR
won't conflict. This is generally an error, apart from very few ports like devel/autoconf/*. - groff produced empty result for <manpage>...
- Warning message comes from
pkg_create(1). Manpages are automatically formatted with
groff(1) if
USE_GROFF
is set. The above message denotes an actual problem while formatting the page, which should be addressed. In the meantime, pkg_create(1) still produces a package, but leaves the manpage unformatted, in the hope that something will be able to make sense of it.
FILES
- ../Makefile.inc
- Common Makefile fragment for a set of ports, included automatically.
- /cdrom/distfiles
- Default path to a CD-ROM (or other media) full of distribution files.
- ${DISTDIR}
- Cache of all distribution files.
- distinfo
- Checksum file. Holds the output of cksum(1), using ${PREFERRED_CIPHERS}, for the port's ${DISTFILES} and ${PATCHFILES}, as well as the sizes of these files.
- ${DISTDIR}/${CHECKSUMFILES}
- Cache of normal distribution files for a given port.
- ${DISTDIR}/${MAKESUMFILES}
- Cache of all distribution files for a given port.
- ${PKGDIR}/DESCR
- Description for the port. Variables such as ${HOMEPAGE} and ${MAINTAINER} will be expanded (see SUBST_VARS). Multi-package ports will use DESCR${SUBPACKAGE}.
- ${PKGDIR}/README
- OpenBSD specific documentation for a port, that
will be installed as
${LOCALBASE}/share/doc/pkg-readmes/${FULLPKGNAME}
at the end of
fake
. Variables fromSUBST_VARS
will be expanded. Multi-package ports will use README${SUBPACKAGE}. - ${PKGDIR}/<foo>.rc
- Startup script for <foo>. Will be installed as
${RCDIR}/<foo> at the end of
fake
. Variables fromSUBST_VARS
will be expanded. - ${PORTSDIR}/infrastructure/db/fake.mtree
- Specification used for populating ${WRKINST} at the start of
fake
. Usepre-fake
if this is incomplete. - ${PORTSDIR}/packages/${MACHINE_ARCH}
- Default setup of ${PACKAGE_REPOSITORY}.
- ${PACKAGE_REPOSITORY}/no-arch
- Location of arch-independent packages.
- ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/all
- Location of all built packages.
- ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/cache
- Location of packages retrieved through the network.
- ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/cksums
- Location of checksums, see
CHECKSUM_PACKAGES
. - ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/cdrom
- Location of packages suitable for the CD.
- ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/ftp
- Location of packages suitable for FTP.
- ${PORTSDIR}/bulk/${MACHINE_ARCH}
- Default setup of ${BULK_COOKIES_DIR}.
- ${PORTSDIR}/update/${MACHINE_ARCH}
- Default setup of ${UPDATE_COOKIES_DIR}.
- ${PORTSDIR}/mystuff
- Extra directory used to store local ports before committing them. All
depend targets will normally look there after the normal lookup fails. See
PORTSDIR_PATH
. - systrace.filter
- List of additional port specific filters, included automatically.
- systrace.policy
- List of additional port specific policies, included automatically.
THE FAKE FRAMEWORK
The fake
target is used to install the
port in a private directory first, ready for packaging by the
package
target, so that the actual installation will
use the package.
Essentially, fake
invokes a real install
process after tweaking a few variables.
fake
first creates a skeleton tree under
${WRKINST}, using the
mtree(8) specification
${PORTSDIR}/infrastructure/db/fake.mtree.
A pre-fake
target may be used to complete
that skeleton tree. For instance, a few ports may need supplementary stuff
to be present (as it would be installed if the port's dependencies were
present).
If {pre,do,post}-install
overrides are
present, they are used with some important changes, listed in
FAKE_SETUP
:
TRUEPREFIX=${PREFIX} PREFIX=${WRKINST}${PREFIX} ${DESTDIRNAME}=${WRKINST}
Essentially, old install targets work transparently, except for a need to change PREFIX to TRUEPREFIX for symbolic links and similar path lookups. Specific traditional post install work can be simply removed, as it will be taken care of by the package itself (for instance, ldconfig, or texinfo's install-info).
If no do-install
override is present, the
port is installed using
env -i ${MAKE_ENV} ${FAKE_SETUP} ${MAKE_PROGRAM} ${ALL_FAKE_FLAGS} -f ${MAKE_FILE} ${FAKE_TARGET}
Note that this does set both PREFIX and ${DESTDIRNAME}. If a port's Makefile both heeds ${DESTDIRNAME}, and references PREFIX explicitly, FAKE_FLAGS may rectify the problem by setting PREFIX=${PREFIX} (which will do the right thing, since ${PREFIX} is a make(1) construct which will not be seen by the shell).
${FAKE_FLAGS} is used to set variables on make(1) command line, which will override the port Makefile contents. Thus, a port that mentions DESTDIR= does not need any patch to work with fake.
Files such as ${PKGDIR}/README* or
${PKGDIR}/*.rc get copied to
${WRKINST} at the end of
fake
(see the FILES
section above for details).
FLAVORS AND MULTI_PACKAGES
Starting with OpenBSD 2.7, each port can generate distinct packages through two orthogonal mechanisms: FLAVORS and MULTI_PACKAGES.
The current MULTI_PACKAGES mechanism was introduced after OpenBSD 4.0.
The arch-dependent part was refined after OpenBSD 5.0.
If a port can be compiled with several options, these options
should be turned into FLAVORS. The port maintainer will set FLAVORS to be
the list of possible options in the Makefile. When building the port, the
package builder will set FLAVOR='option1 option2...'
to build a specific flavor of the port. The Makefile should test the value
of FLAVOR as follows:
FLAVOR?= .if ${FLAVOR:Moption1} # what to do if option1 .endif .if ${FLAVOR:Moption2} # what to do if option2 .endif
bsd.port.mk
takes care of a few details,
such as generating a distinct work directory for each flavor, or creating a
FULLPKGNAME by adding a dash separated list of flavors to the base package
name. The order in which FLAVOR is specified does not matter: this dash
separated list will be reordered to match the ordering of FLAVORS.
It is an error to specify an option in FLAVOR that does not appear in FLAVORS, to prevent misspellings.
In bulk package building, flavors can be specified as a comma separated list after the package directory, e.g., SUBDIR+=vim,no_x11 (see pkgpath(7))
Finally, package information will use templates with the canonical package extension if they are available: if FLAVOR='option1 option2' and both COMMENT and COMMENT-option1-option2 are available, COMMENT-option1-option2 will be used.
If one build of a port can generate several distinct packages, set
MULTI_PACKAGES accordingly. Each extension of a MULTI_PACKAGES name should
start with a dash, so that they cannot be confused with FLAVORS. In
dependency checking and bulk builds, a subpackage can be specified after a
comma, e.g., SUBDIR+=quake,-server. MULTI_PACKAGES only affects the actual
package building step (and the describe
step, since
a MULTI_PACKAGES port will produce several descriptions).
If MULTI_PACKAGES is set, the packaging stage happens once for
every subpackage, using subpackage-specific variables. For instance, if
MULTI_PACKAGES=-main -lib -server, PKG_ARCH-main
,
PKG_ARCH-lib
and
PKG_ARCH-server
will be used for the subpackages
respectively called FULLPKGNAME-main
,
FULLPKGNAME-lib
and
FULLPKGNAME-server
.
All package information is also derived from templates with SUBPACKAGE appended. In the preceding example, the packing-list template for FULLPKGNAME-lib must be in PLIST-lib.
The following variables are subpackage dependent:
COMMENT
, PKG_ARCH
,
PERMIT_PACKAGE_FTP
,
PERMIT_PACKAGE_CDROM
,
PKGFILE
, PKGNAME
,
FULLPKGNAME
, REVISION
,
EPOCH
, FULLPKGPATH
,
RUN_DEPENDS
, WANTLIB
,
LIB_DEPENDS
, IGNORE
,
ONLY_FOR_ARCHS
,
NOT_FOR_ARCHS
, PKG_ARGS
,
PREFIX
, CATEGORIES
,
MESSAGE
, UNMESSAGE
,
DESCR
, PLIST
,
STATIC_PLIST
, PKGSPEC
.
The usual non-MULTI_PACKAGES variables are simply used as default
values for all subpackages. So, if you set
PKG_ARCH=*
PKG_ARCH-main=i386
then
PKG_ARCH-lib
and
PKG_ARCH-server
will both be ‘*’.
WANTLIB
and
LIB_DEPENDS
are special. At the beginning of the
build, during prepare
, all build dependencies will
be checked, which includes LIB_DEPENDS
,
WANTLIB
for every subpackage. As an exception, any
LIB_DEPENDS-sub
that references the current port
will be ignored as a build dependency, in order to avoid recursion.
FULLPKGPATH
and
FULLPKGNAME
are special as well. You must set
PKGNAME-sub
or
FULLPKGNAME-sub
for each subpackage, but
FULLPKGPATH-sub
is set automatically to the right
value. In very rare cases, one may override
FULLPKGPATH-sub
. (for instance, if one specific
subpackage is not affected by option settings that affect other subpackages,
e.g., for include files packs).
In terms of using the port, quite a few targets will have a
subpackage specific subtarget: invoking package
is
the same as invoking subpackage
for all subpackages,
invoking install-all
is the same as invoking
install
for all subpackages, and invoking
update
is the same as invoking
subupdate
for all subpackages.
ONLY_FOR_ARCHS
and
NOT_FOR_ARCHS
interact with
MULTI_PACKAGES
and IGNORE
.
The infrastructure will automatically filter subpackages that are not
suitable for the current architecture. Thus,
MULTI_PACKAGES
should always list all subpackages,
even things not buildable on the current architecture, for indexing
purposes.
Starting with OpenBSD 5.1,
bsd.port.arch.mk(5) should be used to simplify the handling
of MULTI_PACKAGES
in arch-dependent setups:
Make sure MULTI_PACKAGES
,
ONLY_FOR_ARCHS*
, and
PSEUDO_FLAVORS
are defined correctly, then
.include <bsd.port.arch.mk>
This will compute BUILD_PACKAGES
, the list
of actual subpackages to build with the current setup, by taking arch
constraints and pseudo-flavors into account. Then test
BUILD_PACKAGES
to set up the right configuration,
e.g., to check if SUBPACKAGE
-mono should be built:
.if ${BUILD_PACKAGES:M-mono}
The lang/gcc/4.9 or print/poppler ports should provide examples of proper use.
Note that dpb(1) will break if all subpackages are not properly listed.
THE GENERATION OF PACKAGE INFORMATION
Starting after OpenBSD 4.1 all package information is processed directly by pkg_create(1) from templates in ${PKG_DIR}.
- If not overridden by the user, determine which set of templates to use, depending on the current SUBPACKAGE and FLAVOR information. Set PLIST${SUBPACKAGE}, DESCR${SUBPACKAGE}, COMMENT${SUBPACKAGE}, MESSAGE${SUBPACKAGE}, UNMESSAGE${SUBPACKAGE} accordingly.
- Generate the actual DESCR, and if needed, MESSAGE, UNMESSAGE, from the templates in ${DESCR}, ${MESSAGE}, ${UNMESSAGE}, by substituting the variables in ${SUBST_VARS}, and by substituting ${FLAVORS} with the canonical flavor extension for this port, e.g., if FLAVORS=no_map gfx qt2, if FLAVOR=gfx no_map, this is ‘-no_map-gfx’.
- Generate the actual PLIST from the template ${PLIST}, by inserting shared/no-shared fragments, merging other fragments, and applying the same variable substitutions as other package information.
Note that ${COMMENT} is currently not substituted, to speed up
describe
generation.
To avoid substitution, variables can be escaped as follows:
$\{PREFIX}
Constructs such as the line %%SHARED%%
or
!%%SHARED%%
in the packing-list template trigger the
inclusion of the ${PKGDIR}/PFRAG.shared${SUBPACKAGE}
or ${PKGDIR}/PFRAG.no-shared${SUBPACKAGE}.
Similarly, if FLAVORS lists flav1, then the line
%%flav1%%
(resp. !%%flav1%%
)
will trigger the inclusion of
${PKGDIR}/PFRAG.flav1${SUBPACKAGE} (resp.
${PKGDIR}/PFRAG.no-flav1${SUBPACKAGE}) in the
packing-list. Other fragments can be defined by simply adding
-Dfrag=1
or -Dfrag=0
to
PKG_ARGS
If libraries are built using bsd.lib.mk,
special care should be taken for mips64* architectures, which do not ever
build *pic.a files (all mips code is pic already).
bsd.port.mk
automatically adds
-Dno_mips64=1
or
-Dno_mips64=0
to PKG_ARGS
,
and the porter only needs to provide the appropriate fragment.
pkg_add(1) now calls
ldconfig(8) directly, provided dynamic libraries have been annotated
with @lib libthingy.so.5.0
. Adding new directories
to the dynamic loader cache has been deprecated. It is often better to let
libraries be visible as a link under ${LOCALBASE}. Having a separate
directory is enough to trick
ld(1)
into grabbing the right version. Libraries used only for
dlopen(3) do not need to be visible. Some programs will prefer to use
rpath to find their own libraries.
The special update-plist
target does a
fairly good job of automatically generating PLIST and PFRAG.shared
fragments.
If PLIST_DB
points to a directory, all
packing-lists from packages generated by
pkg_create(1) during the package
stage are saved in that location by a script:
${PORTSDIR}/infrastructure/bin/register-plist. This
script strips some irrelevant information and normalizes the packing-list
somehow, and compares it to existing information, looking for relevant
changes. Since a package name must always be changed when the packing-list
changes, any attempt to replace a packing-list of a given name with a
different packing-list will be flagged as an error.
In MULTI_PACKAGES mode, there must be separate COMMENT, DESCR, and PLIST templates for each SUBPACKAGE (and optional distinct MESSAGE, UNMESSAGE files in a similar way). This contrasts with the FLAVORS situation, where all these files will automatically default to the non-flavor version if there is no flavor-specific file around.
OBSOLETE TARGETS
cdrom-packages
,ftp-packages
- Links are now created during the
package
target. depends-list
- Renamed into
full-build-depends
. {pre,do}-extract
- Don't override. Set
EXTRACT_ONLY
to nothing and overridepost-extract
instead. {pre,do,post}-fetch
- These prevented bulk mechanisms from running properly.
{pre,do,post}-package
- There is no port that requires special treatment during packaging, as
{pre,do,post}-install
should take care of every necessity. fetch-list
,mirror-distfiles
,fetch-makefile
- See mirroring-ports(7) for more efficient and flexible ways to build mirrors.
obj
- Starting with OpenBSD 3.3, using
WRKOBJDIR
no longer creates a symlink between the current directory and a subdirectory of ${WRKOBJDIR}, soobj
is no longer applicable. print-depends
- Use
print-build-depends
andprint-run-depends
instead. print-depends-list
- Renamed into
print-build-depends
. print-package-depends
- Renamed into
print-run-depends
. print-package-signature
- Renamed into
print-update-signature
. readme
,readmes
- replaced by the databases/ports-readmes port, using the Template Toolkit (textproc/p5-Template) instead of hand-coded substitutions.
OBSOLETE VARIABLES
BIN_PACKAGES
- Old user settings. The infrastructure always trusts the repository to contain correct packages. So, if the package name did not change and if it exists in the repository, it will not be rebuilt without manual user action.
CATn
- List of formatted manpages, per section.
CATPREFIX
- Location for storing formatted manpages. Derived directly from
PREFIX
. CDROM_PACKAGES
- Old user settings. Base location where packages suitable for a CD-ROM (see PERMIT_PACKAGE_CDROM) will be placed. Now hardwired to ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/cdrom.
COMMENT
- Used to be the name of the comment file for a package. It now holds the comment itself. Some magic has been put in to allow for a seamless transition.
DESCR_SRC
- From NetBSD. This is DESCR. OpenBSD does not give a specific name to the generated file. It is not recommended to try to access it directly.
EXTRACT_AFTER_ARGS
- Was used to cobble together the normal extraction command, as
${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${EXTRACT_AFTER_ARGS}. Use
EXTRACT_CASES
instead. EXTRACT_BEFORE_ARGS
- Likewise, use
EXTRACT_CASES
instead. EXTRACT_CMD
- Likewise, use
EXTRACT_CASES
instead. FETCH_BEFORE_ARGS
,FETCH_AFTER_ARGS
- Set
FETCH_CMD
to point to a script that does any required special treatment instead. FETCH_DEPENDS
- Used to specify dependencies that were needed to fetch files. It is much easier to mirror locally weird distribution files.
FTP_PACKAGES
- User settings. Base location where packages suitable for FTP (see PERMIT_PACKAGE_FTP) will be placed. Now hardwired to ${PACKAGE_REPOSITORY}/${MACHINE_ARCH}/ftp.
GNU_CONFIGURE
- Use
CONFIGURE_STYLE
instead. HAS_CONFIGURE
- Use
CONFIGURE_STYLE
instead. IGNOREFILES
- Set to the list of files that can't be checksummed. All uses of it have led to postponing the correct action: talking to the software author and getting him to provide versioned archives.
MANn
- List of unformatted manpages, per section.
MANPREFIX
- Location for storing unformatted manpages. Derived directly from
PREFIX
. MASTERDIR
- From FreeBSD. Used to organize a collection of ports that share most files. OpenBSD uses a single port with flavors or multi-packages to produce package variations instead.
MASTER_SITE_SUBDIR
- Contents were used to replace ‘%SUBDIR%’ in all
MASTER_SITES
variables. Since ‘%SUBDIR%’ almost always occur at the end of the directory, the simpler${VARIABLE:=subdir/}
construct is now used instead (taken from NetBSD). MD5_FILE
- Use
CHECKSUM_FILE
instead. MIRROR_DISTFILE
- Use
PERMIT_DISTFILES_FTP
to determine which files can be mirrored instead. See mirroring-ports(7). NEED_VERSION
- Used to set a requirement on a specific revision of
bsd.port.mk
needed by a port. No longer needed asbsd.port.mk
should always be kept up-to-date. NO_CONFIGURE
- If ${CONFIGURE_SCRIPT} does not exist, no automatic configuration will be done anyway.
NO_DESCRIBE
- All ports should generate a description.
NO_EXTRACT
- Set EXTRACT_ONLY= instead.
NO_INSTALL_MANPAGES
- Use
CONFIGURE_STYLE
instead. NO_MTREE
- Starting with OpenBSD 2.7, the operating system installation script runs the /usr/local specification globally, instead of embedding it in each package. So packages no longer record an mtree(8) specification. Use an explicit ‘@exec’ command if needed.
NO_PACKAGE
- All ports should generate a package, preferably before install.
NO_PATCH
- The absence of a patches directory does the same. Use PATCHDIR and PATCH_LIST if patches need to be changed dynamically.
NO_WRKDIR
- All ports should have a working directory, as this is necessary to store cookies and keep state.
NO_WRKSUBDIR
- The same functionality is obtained by setting WRKDIST=${WRKDIR} .
NOCLEANDEPENDS
- Use CLEANDEPENDS instead.
NOMANCOMPRESS
- FreeBSD ships with compressed man pages, and uses this variable to control that behavior.
OBJMACHINE
- Starting with OpenBSD 3.3, setting
WRKOBJDIR
creates the wholeWRKDIR
hierarchy under ${WRKOBJDIR}, soOBJMACHINE
is no longer useful. OPSYS
- The operating system. This ports tree is only used on OpenBSD.
OPSYS_VER
- Use
OSREV
instead. PACKAGES
- Base location for packages built, everything is based on
PACKAGE_REPOSITORY
now. PACKAGING
- Used to be set during package creation, so that the port would test it to
tweak some settings at this point. All its effects are now achieved
through
MULTI_PACKAGES
. PATCH_SITES
PATCHFILES
used to be retrieved from a separate site list. For greater flexibility, all files are now retrieved fromMASTER_SITES
,MASTER_SITES0
,...
,MASTER_SITES9
, using a ‘:0’ to ‘:9’ extension to the file name, e.g.,PATCHFILES=foo.diff.gz PATCH_SITES=ftp://ftp.zoinx.org/pub/
becomes
PATCHFILES=foo.diff.gz:0 MASTER_SITES0=ftp://ftp.zoinx.org/pub/
PERMIT_DISTFILES_CDROM
- The OpenBSD project does not ship distfiles on
cdrom. Concentrate on real questions instead, make sure
PERMIT_PACKAGE_CDROM
is set correctly. PKG_CMD
- replaced by
PKG_CREATE
. PKGREPOSITORY
- Old user settings. See
PACKAGE_REPOSITORY
. PKGREPOSITORYBASE
- Old user settings. See
PACKAGE_REPOSITORY
. PLIST_SRC
- From NetBSD. This is PLIST. OpenBSD does not give a specific name to the generated file. It is not recommended to try to access them directly.
PKGNAME
- Used to refer to the full package name, has been superseded by
FULLPKGNAME-foo
, forSUBPACKAGE
-foo .PKGNAME
now holds the package name, not taking multi-packages or flavors into account. Most ports are not concerned by this change. PLIST_SUBST
- From NetBSD and FreeBSD. Use SUBST_VARS instead. OpenBSD does not allow general substitutions of the form VAR=value, but uses only a list of variables instead. Most package files gets transformed, instead of only the packing list.
RESTRICTED
- Port has cryptographic issues. OpenBSD focuses on
PERMIT_PACKAGE_{FTP,CDROM}
instead. SED_PLIST
- Old pipeline for creating packing-lists at the ports level. Necessary functionality has been integrated directly into pkg_create(1).
SCRIPTDIR
- Old location for scripts related to the current port. There is no reason
for the semantic distinction, use
FILESDIR
for those. SCRIPTS_ENV
- Used to contain the environment for invoking various scripts.
CONFIGURE_ENV
andMAKE_ENV
are enough. USE_AUTOCONF
- Use
CONFIGURE_STYLE
instead. USE_BZIP2
- The framework will automatically detect the presence of
.tar.bz2 files to extract. See also
BZIP2
,EXTRACT_CASES
, andEXTRACT_SUFX
. USE_IMAKE
- Use
CONFIGURE_STYLE
instead. USE_ZIP
- The framework will automatically detect the presence of
.zip files to extract. See also
ZIP
,EXTRACT_CASES
, andEXTRACT_SUFX
. VARNAME
- Use make show=name instead of make show VARNAME=name.
WRKPKG
- Directory used to build package information from the templates under ${PKGDIR}. This information is now built on the fly by pkg_create(1).
OBSOLETE FILES
- {files,patches,pkg}.${ARCH}
- Offensive to introspection, makes it impossible to build a decent sqlports
on a given arch. Hasn't been used for a long time, and there are lots of
mechanisms such as
PKG_ARGS
and fragment substitution, orPATCH_LIST
to achieve similar results. - Makefile.${ARCH}
- Likewise, offensive to introspection too.
- ${FILESDIR}/md5
- Renamed to distinfo to match other BSD, and save directories.
- ${SCRIPTDIR}/{pre,do,post}-*
- Identical functionality can be obtained through a
{pre,do,post}-*
target, invoking the script manually if necessary. - ${SCRIPTDIR}/configure
- No longer invoked automatically. Just inline the instructions in
do-configure
in the Makefile, or put the script in ${FILESDIR} and invoke it. - ${PKGDIR}/COMMENT
- Use COMMENT variable instead.
- ${PKGDIR}/DEINSTALL*
- Use @unexec annotations in the packing-list instead.
- ${PKGDIR}/INSTALL*
- Use @exec annotations in the packing-list instead.
- ${PKGDIR}/PLIST.noshared
- Use PFRAG.shared or PFRAG.no-shared instead. PLIST.noshared was too easy to forget when updating ports.
- ${PKGDIR}/PLIST.sed
- Use PLIST directly. Until revision 1.295,
bsd.port.mk
did not substitute variables in the packing list unless this special form was used. - ${PKGDIR}/REQ*
- Old requirement script. Was mostly unused anyway.
- /usr/share/mk/bsd.port.mk
- Original location of
bsd.port.mk
. The current file lives under ${PORTSDIR}/infrastructure/mk/bsd.port.mk, whereas /usr/share/mk/bsd.port.mk is just a stub. - {scripts,files,patches}.${OPSYS}
- The OpenBSD ports tree focuses on robustness, not on being portable to other operating systems. In any case, portability should not need to depend on operating system dependent patches.
- /usr/local/etc
- Used by FreeBSD to marshall system configuration files. All OpenBSD system configuration files are located in /etc, or in a subdirectory of /etc.
SEE ALSO
ftp(1), pkg_add(1), pkg_create(1), OpenBSD::Intro(3p), bsd.port.arch.mk(5), mk.conf(5), port-modules(5), library-specs(7), mirroring-ports(7), packages-specs(7), pkgpath(7), ports(7)
HISTORY
The ports mechanism originally came from FreeBSD. A lot of additions were taken from NetBSD over the seminal years.
Since 1998, the framework has been systematically cleaned-up and reorganized to remove bugs. New features have been carefully introduced, trying hard to avoid inconsistencies.
FLAVORS, MULTI_PACKAGES and FAKE are OpenBSD improvements. Most recent additions do not come from another BSD.
BUGS AND LIMITATIONS
LOCALBASE
,
X11BASE
, SYSCONFDIR
and
PREFIX
are not heeded consistently. Most of the
ports tree will probably fall apart if one tries to build/use stuff
elsewhere.