apply a diff file to an
patch will take a patch file containing
any of the four forms of difference listing produced by the
diff(1) program and apply those differences to an original file,
producing a patched version. If patchfile is omitted,
or is a hyphen, the patch will be read from the standard input.
patch will attempt to determine the type
of the diff listing, unless overruled by a
-u option. Context diffs (old-style, new-style, and
unified) and normal diffs are applied directly by the
patch program itself, whereas ed diffs are simply
fed to the ed(1) editor via a pipe.
If the patchfile contains more than one
patch will try to apply each of them as if
they came from separate patch files. This means, among other things, that it
is assumed that the name of the file to patch must be determined for each
diff listing, and that the garbage before each diff listing will be examined
for interesting things such as file names and revision level (see the
section on Filename
The options are as follows:
- Causes the next argument to be interpreted as a prefix to the backup file
name. If this argument is specified, any argument to
-zwill be ignored.
- Save a backup copy of the file before it is modified. By default the
original file is saved with a backup extension of ".orig" unless
the file already has a numbered backup, in which case a numbered backup is
made. This is equivalent to specifying "
existing". This option is currently the default, unless
- Checks that the patch would apply cleanly, but does not modify anything.
patchto interpret the patch file as a context diff.
patchto use the "#ifdef...#endif" construct to mark changes. The argument following will be used as the differentiating symbol. Note that, unlike the C compiler, there must be a space between the
-Dand the argument.
patchto interpret the next argument as a directory, and change working directory to it before doing anything else.
patchto remove output files that are empty after the patches have been applied. This option is useful when applying patches that create or remove files.
patchto interpret the patch file as an ed(1) script.
- Sets the maximum fuzz factor. This option only applies to context diffs,
patchto ignore up to that many lines in looking for places to install a hunk. Note that a larger fuzz factor increases the odds of a faulty patch. The default fuzz factor is 2, and it may not be set to more than the number of lines of context in the context diff, ordinarily 3.
patchto assume that the user knows exactly what he or she is doing, and to not ask any questions. It assumes the following: skip patches for which a file to patch can't be found; patch files even though they have the wrong version for the "Prereq:" line in the patch; and assume that patches are not reversed even if they look like they are. This option does not suppress commentary; use
- Causes the next argument to be interpreted as the input file name (i.e. a patchfile). This option may be specified multiple times.
- Causes the pattern matching to be done loosely, in case the tabs and spaces have been munged in your input file. Any sequence of whitespace in the pattern line will match any sequence in the input file. Normal characters must still match exactly. Each line of the context must still match a line in the input file.
patchto ignore patches that it thinks are reversed or already applied. See also
patchto interpret the patch file as a normal diff.
- Causes the next argument to be interpreted as the output file name.
- Sets the pathname strip count, which controls how pathnames found in the
patch file are treated, in case you keep your files in a different
directory than the person who sent out the patch. The strip count
specifies how many slashes are to be stripped from the front of the
pathname. (Any intervening directory names also go away.) For example,
supposing the file name in the patch file was
-p0 gives the entire pathname unmodified.
without the leading slash.
-pat all just gives you blurfl.c, unless all of the directories in the leading path (u/howard/src/blurfl) exist and that path is relative, in which case you get the entire pathname unmodified. Whatever you end up with is looked for either in the current directory, or the directory specified by the
patchthat this patch was created with the old and new files swapped. (Yes, I'm afraid that does happen occasionally, human nature being what it is.)
patchwill attempt to swap each hunk around before applying it. Rejects will come out in the swapped format. The
-Roption will not work with ed diff scripts because there is too little information to reconstruct the reverse operation.
If the first hunk of a patch fails,
patchwill reverse the hunk to see if it can be applied that way. If it can, you will be asked if you want to have the
-Roption set. If it can't, the patch will continue to be applied normally. (Note: this method cannot detect a reversed patch if it is a normal diff and if the first command is an append (i.e. it should have been a delete) since appends always succeed, due to the fact that a null context will match anywhere. Luckily, most patches add or change lines rather than delete them, so most reversed normal diffs will begin with a delete, which will fail, triggering the heuristic.)
- Causes the next argument to be interpreted as the reject file name.
patchdo its work silently, unless an error occurs.
- Similar to
-f, in that it suppresses questions, but makes some different assumptions: skip patches for which a file to patch can't be found (the same as
-f); skip patches for which the file has the wrong version for the "Prereq:" line in the patch; and assume that patches are reversed if they look like they are.
patchto interpret the patch file as a unified context diff (a unidiff).
- Causes the next argument to be interpreted as a method for creating backup
file names. The type of backups made can also be given in the
VERSION_CONTROLenvironment variables, which are overridden by this option. The
-Boption overrides this option, causing the prefix to always be used for making backup file names. The values of the
VERSION_CONTROLenvironment variables and the argument to the
-Voption are like the GNU Emacs “version-control” variable; they also recognize synonyms that are more descriptive. The valid values are (unique abbreviations are accepted):
patchto print out its revision header and patch level.
- Sets internal debugging flags, and is of interest only to
- Causes the next argument to be interpreted as the backup extension, to be used in place of ".orig".
- Enables strict IEEE Std 1003.1-2008
(“POSIX.1”) conformance, specifically:
- Backup files are not created unless the
-boption is specified.
- If unspecified, the file name used is the first of the old, new and index files that exists.
- Backup files are not created unless the
patch will try to skip any leading
garbage, apply the diff, and then skip any trailing garbage. Thus you could
feed an article or message containing a diff listing to
patch, and it should work. If the entire diff is
indented by a consistent amount, this will be taken into account.
With context diffs, and to a lesser extent with normal diffs,
patch can detect when the line numbers mentioned in
the patch are incorrect, and will attempt to find the correct place to apply
each hunk of the patch. As a first guess, it takes the line number mentioned
for the hunk, plus or minus any offset used in applying the previous hunk.
If that is not the correct place,
patch will scan
both forwards and backwards for a set of lines matching the context given in
the hunk. First
patch looks for a place where all
lines of the context match. If no such place is found, and it's a context
diff, and the maximum fuzz factor is set to 1 or more, then another scan
takes place ignoring the first and last line of context. If that fails, and
the maximum fuzz factor is set to 2 or more, the first two and last two
lines of context are ignored, and another scan is made. (The default maximum
fuzz factor is 2.)
patch cannot find a place to install
that hunk of the patch, it will put the hunk out to a reject file, which
normally is the name of the output file plus ".rej". (Note that
the rejected hunk will come out in context diff form whether the input patch
was a context diff or a normal diff. If the input was a normal diff, many of
the contexts will simply be null.) The line numbers on the hunks in the
reject file may be different than in the patch file: they reflect the
approximate location patch thinks the failed hunks belong in the new file
rather than the old one.
As each hunk is completed, you will be told whether the hunk
succeeded or failed, and which line (in the new file)
patch thought the hunk should go on. If this is
different from the line number specified in the diff, you will be told the
offset. A single large offset MAY be an indication that a hunk was installed
in the wrong place. You will also be told if a fuzz factor was used to make
the match, in which case you should also be slightly suspicious.
If no original file is specified on the command line,
patch will try to figure out from the leading
garbage what the name of the file to edit is. When checking a prospective
file name, pathname components are stripped as specified by the
-p option and the file's existence and writability
are checked relative to the current working directory (or the directory
specified by the
If the diff is a context or unified diff,
patch is able to determine the old and new file
names from the diff header. For context diffs, the “old” file
is specified in the line beginning with "***" and the
“new” file is specified in the line beginning with
"---". For a unified diff, the “old” file is
specified in the line beginning with "---" and the
“new” file is specified in the line beginning with
"+++". If there is an "Index:" line in the leading
garbage (regardless of the diff type),
use the file name from that line as the “index” file.
patch will choose the file name by
performing the following steps, with the first match used:
patchis operating in strict IEEE Std 1003.1-2008 (“POSIX.1”) mode, the first of the “old”, “new” and “index” file names that exist is used. Otherwise,
patchwill examine either the “old” and “new” file names or, for a non-context diff, the “index” file name, and choose the file name with the fewest path components, the shortest basename, and the shortest total file name length (in that order).
- If no suitable file was found to patch, the patch file is a context or unified diff, and the old file was zero length, the new file name is created and used.
- If the file name still cannot be determined,
patchwill prompt the user for the file name to use.
Additionally, if the leading garbage contains a
"Prereq: " line,
patch will take
the first word from the prerequisites line (normally a version number) and
check the input file to see if that word can be found. If not,
patch will ask for confirmation before
The upshot of all this is that you should be able to say, while in a news interface, the following:
| patch -d /usr/src/local/blurfl
and patch a file in the blurfl directory directly from the article containing the patch.
By default, the patched version is put in place of the original,
with the original file backed up to the same name with the extension
".orig", or as specified by the
-z options. The
extension used for making backup files may also be specified in the
SIMPLE_BACKUP_SUFFIX environment variable, which is
overridden by the options above.
If the backup file is a symbolic or hard link to the original
patch creates a new backup file name by
changing the first lowercase letter in the last component of the file's name
into uppercase. If there are no more lowercase letters in the name, it
removes the first character from the name. It repeats this process until it
comes up with a backup file that does not already exist or is not linked to
the original file.
You may also specify where you want the output to go with the
-o option; if that file already exists, it is backed
Notes For Patch Senders
There are several things you should bear in mind if you are going to be sending out patches:
First, you can save people a lot of grief by keeping a patchlevel.h file which is patched to increment the patch level as the first diff in the patch file you send out. If you put a "Prereq:" line in with the patch, it won't let them apply patches out of order without some warning.
Second, make sure you've specified the file names right, either in
a context diff header, or with an "Index:" line. If you are
patching something in a subdirectory, be sure to tell the patch user to
-p option as needed.
Third, you can create a file by sending out a diff that compares a null file to the file you want to create. This will only work if the file you want to create doesn't exist already in the target directory.
Fourth, take care not to send out reversed patches, since it makes people wonder whether they already applied the patch.
Fifth, while you may be able to get away with putting 582 diff listings into one file, it is probably wiser to group related patches into separate files in case something goes haywire.
- When set,
patchbehaves as if the
--posixoption has been specified.
- Extension to use for backup file names instead of ".orig".
- Directory to put temporary files in; default is /tmp.
- Selects when numbered backup files are made.
- Same as
- used to read input when
patchprompts the user
patch utility exits with one of the
- Successful completion.
- One or more lines were written to a reject file.
- An error occurred.
When applying a set of patches in a loop it behooves you to check this exit status so you don't apply a later patch to a partially patched file.
Too many to list here, but generally indicative that
patch couldn't parse your patch file.
The message "Hmm..." indicates that there is unprocessed
text in the patch file and that
patch is attempting
to intuit whether there is a patch in that text and, if so, what kind of
patch it is.
patch utility is compliant with the
IEEE Std 1003.1-2008 (“POSIX.1”)
specification, except as detailed above for the
The flags [
--posix] are extensions to that specification.
Larry Wall with many other contributors.
patch cannot tell if the line numbers are
off in an ed script, and can only detect bad line numbers in a normal diff
when it finds a "change" or a "delete" command. A
context diff using fuzz factor 3 may have the same problem. Until a suitable
interactive interface is added, you should probably do a context diff in
these cases to see if the changes made sense. Of course, compiling without
errors is a pretty good indication that the patch worked, but not
patch usually produces the correct
results, even when it has to do a lot of guessing. However, the results are
guaranteed to be correct only when the patch is applied to exactly the same
version of the file that the patch was generated from.
Could be smarter about partial matches, excessively deviant offsets and swapped code, but that would take an extra pass.
Check patch mode (
-C) will fail if you try
to check several patches in succession that build on each other. The entire
patch code would have to be restructured to keep
temporary files around so that it can handle this situation.
If code has been duplicated (for instance with #ifdef OLDCODE ...
#else ... #endif),
patch is incapable of patching
both versions and, if it works at all, will likely patch the wrong one, and
tell you that it succeeded to boot.
If you apply a patch you've already applied,
patch will think it is a reversed patch, and offer
to un-apply the patch. This could be construed as a feature.