NAME
ssh
—
OpenSSH remote login client
SYNOPSIS
ssh |
[-46AaCfGgKkMNnqsTtVvXxYy ]
[-B bind_interface]
[-b bind_address]
[-c cipher_spec]
[-D
[bind_address:]port]
[-E log_file]
[-e escape_char]
[-F configfile]
[-I pkcs11]
[-i identity_file]
[-J destination]
[-L address]
[-l login_name]
[-m mac_spec]
[-O ctl_cmd]
[-o option]
[-p port]
[-Q query_option]
[-R address]
[-S ctl_path]
[-W
host:port]
[-w
local_tun[:remote_tun]]
destination [command] |
DESCRIPTION
ssh
(SSH client) is a program for logging
into a remote machine and for executing commands on a remote machine. It is
intended to provide secure encrypted communications between two untrusted
hosts over an insecure network. X11 connections, arbitrary TCP ports and
UNIX-domain sockets can also be forwarded over the
secure channel.
ssh
connects and logs into the specified
destination, which may be specified as either
[user@]hostname or a URI of the form
ssh://[user@]hostname[:port]. The user must prove
his/her identity to the remote machine using one of several methods (see
below).
If a command is specified, it is executed on the remote host instead of a login shell.
The options are as follows:
-4
- Forces
ssh
to use IPv4 addresses only. -6
- Forces
ssh
to use IPv6 addresses only. -A
- Enables forwarding of connections from an authentication agent such as
ssh-agent(1). This can also be specified on a per-host
basis in a configuration file.
Agent forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the agent's UNIX-domain socket) can access the local agent through the forwarded connection. An attacker cannot obtain key material from the agent, however they can perform operations on the keys that enable them to authenticate using the identities loaded into the agent. A safer alternative may be to use a jump host (see
-J
). -a
- Disables forwarding of the authentication agent connection.
-B
bind_interface- Bind to the address of bind_interface before attempting to connect to the destination host. This is only useful on systems with more than one address.
-b
bind_address- Use bind_address on the local machine as the source address of the connection. Only useful on systems with more than one address.
-C
- Requests compression of all data (including stdin, stdout, stderr, and
data for forwarded X11, TCP and UNIX-domain
connections). The compression algorithm is the same used by
gzip(1). Compression is desirable on modem lines and other slow
connections, but will only slow down things on fast networks. The default
value can be set on a host-by-host basis in the configuration files; see
the
Compression
option. -c
cipher_spec- Selects the cipher specification for encrypting the session.
cipher_spec is a comma-separated list of ciphers
listed in order of preference. See the
Ciphers
keyword in ssh_config(5) for more information. -D
[bind_address:]port- Specifies a local “dynamic” application-level port
forwarding. This works by allocating a socket to listen to
port on the local side, optionally bound to the
specified bind_address. Whenever a connection is
made to this port, the connection is forwarded over the secure channel,
and the application protocol is then used to determine where to connect to
from the remote machine. Currently the SOCKS4 and SOCKS5 protocols are
supported, and
ssh
will act as a SOCKS server. Only root can forward privileged ports. Dynamic port forwardings can also be specified in the configuration file.IPv6 addresses can be specified by enclosing the address in square brackets. Only the superuser can forward privileged ports. By default, the local port is bound in accordance with the
GatewayPorts
setting. However, an explicit bind_address may be used to bind the connection to a specific address. The bind_address of “localhost” indicates that the listening port be bound for local use only, while an empty address or ‘*’ indicates that the port should be available from all interfaces. -E
log_file- Append debug logs to log_file instead of standard error.
-e
escape_char- Sets the escape character for sessions with a pty (default:
‘
~
’). The escape character is only recognized at the beginning of a line. The escape character followed by a dot (‘.
’) closes the connection; followed by control-Z suspends the connection; and followed by itself sends the escape character once. Setting the character to “none” disables any escapes and makes the session fully transparent. -F
configfile- Specifies an alternative per-user configuration file. If a configuration file is given on the command line, the system-wide configuration file (/etc/ssh/ssh_config) will be ignored. The default for the per-user configuration file is ~/.ssh/config. If set to “none”, no configuration files will be read.
-f
- Requests
ssh
to go to background just before command execution. This is useful ifssh
is going to ask for passwords or passphrases, but the user wants it in the background. This implies-n
. The recommended way to start X11 programs at a remote site is with something likessh -f host xterm
.If the
ExitOnForwardFailure
configuration option is set to “yes”, then a client started with-f
will wait for all remote port forwards to be successfully established before placing itself in the background. -G
- Causes
ssh
to print its configuration after evaluatingHost
andMatch
blocks and exit. -g
- Allows remote hosts to connect to local forwarded ports. If used on a multiplexed connection, then this option must be specified on the master process.
-I
pkcs11- Specify the PKCS#11 shared library
ssh
should use to communicate with a PKCS#11 token providing keys for user authentication. -i
identity_file- Selects a file from which the identity (private key) for public key
authentication is read. The default is
~/.ssh/id_dsa,
~/.ssh/id_ecdsa,
~/.ssh/id_ecdsa_sk,
~/.ssh/id_ed25519,
~/.ssh/id_ed25519_sk and
~/.ssh/id_rsa. Identity files may also be
specified on a per-host basis in the configuration file. It is possible to
have multiple
-i
options (and multiple identities specified in configuration files). If no certificates have been explicitly specified by theCertificateFile
directive,ssh
will also try to load certificate information from the filename obtained by appending -cert.pub to identity filenames. -J
destination- Connect to the target host by first making a
ssh
connection to the jump host described by destination and then establishing a TCP forwarding to the ultimate destination from there. Multiple jump hops may be specified separated by comma characters. This is a shortcut to specify aProxyJump
configuration directive. Note that configuration directives supplied on the command-line generally apply to the destination host and not any specified jump hosts. Use ~/.ssh/config to specify configuration for jump hosts. -K
- Enables GSSAPI-based authentication and forwarding (delegation) of GSSAPI credentials to the server.
-k
- Disables forwarding (delegation) of GSSAPI credentials to the server.
-L
[bind_address:]port:host:hostport-L
[bind_address:]port:remote_socket-L
local_socket:host:hostport-L
local_socket:remote_socket- Specifies that connections to the given TCP port or Unix socket on the
local (client) host are to be forwarded to the given host and port, or
Unix socket, on the remote side. This works by allocating a socket to
listen to either a TCP port on the local side,
optionally bound to the specified bind_address, or
to a Unix socket. Whenever a connection is made to the local port or
socket, the connection is forwarded over the secure channel, and a
connection is made to either host port
hostport, or the Unix socket
remote_socket, from the remote machine.
Port forwardings can also be specified in the configuration file. Only the superuser can forward privileged ports. IPv6 addresses can be specified by enclosing the address in square brackets.
By default, the local port is bound in accordance with the
GatewayPorts
setting. However, an explicit bind_address may be used to bind the connection to a specific address. The bind_address of “localhost” indicates that the listening port be bound for local use only, while an empty address or ‘*’ indicates that the port should be available from all interfaces. -l
login_name- Specifies the user to log in as on the remote machine. This also may be specified on a per-host basis in the configuration file.
-M
- Places the
ssh
client into “master” mode for connection sharing. Multiple-M
options placesssh
into “master” mode but with confirmation required using ssh-askpass(1) before each operation that changes the multiplexing state (e.g. opening a new session). Refer to the description ofControlMaster
in ssh_config(5) for details. -m
mac_spec- A comma-separated list of MAC (message authentication code) algorithms,
specified in order of preference. See the
MACs
keyword for more information. -N
- Do not execute a remote command. This is useful for just forwarding ports.
-n
- Redirects stdin from /dev/null (actually, prevents
reading from stdin). This must be used when
ssh
is run in the background. A common trick is to use this to run X11 programs on a remote machine. For example,ssh -n shadows.cs.hut.fi emacs &
will start an emacs on shadows.cs.hut.fi, and the X11 connection will be automatically forwarded over an encrypted channel. Thessh
program will be put in the background. (This does not work ifssh
needs to ask for a password or passphrase; see also the-f
option.) -O
ctl_cmd- Control an active connection multiplexing master process. When the
-O
option is specified, the ctl_cmd argument is interpreted and passed to the master process. Valid commands are: “check” (check that the master process is running), “forward” (request forwardings without command execution), “cancel” (cancel forwardings), “exit” (request the master to exit), and “stop” (request the master to stop accepting further multiplexing requests). -o
option- Can be used to give options in the format used in the configuration file.
This is useful for specifying options for which there is no separate
command-line flag. For full details of the options listed below, and their
possible values, see
ssh_config(5).
- AddKeysToAgent
- AddressFamily
- BatchMode
- BindAddress
- CanonicalDomains
- CanonicalizeFallbackLocal
- CanonicalizeHostname
- CanonicalizeMaxDots
- CanonicalizePermittedCNAMEs
- CASignatureAlgorithms
- CertificateFile
- ChallengeResponseAuthentication
- CheckHostIP
- Ciphers
- ClearAllForwardings
- Compression
- ConnectionAttempts
- ConnectTimeout
- ControlMaster
- ControlPath
- ControlPersist
- DynamicForward
- EscapeChar
- ExitOnForwardFailure
- FingerprintHash
- ForwardAgent
- ForwardX11
- ForwardX11Timeout
- ForwardX11Trusted
- GatewayPorts
- GlobalKnownHostsFile
- GSSAPIAuthentication
- GSSAPIDelegateCredentials
- HashKnownHosts
- Host
- HostbasedAuthentication
- HostbasedKeyTypes
- HostKeyAlgorithms
- HostKeyAlias
- Hostname
- IdentitiesOnly
- IdentityAgent
- IdentityFile
- IPQoS
- KbdInteractiveAuthentication
- KbdInteractiveDevices
- KexAlgorithms
- LocalCommand
- LocalForward
- LogLevel
- MACs
- Match
- NoHostAuthenticationForLocalhost
- NumberOfPasswordPrompts
- PasswordAuthentication
- PermitLocalCommand
- PKCS11Provider
- Port
- PreferredAuthentications
- ProxyCommand
- ProxyJump
- ProxyUseFdpass
- PubkeyAcceptedKeyTypes
- PubkeyAuthentication
- RekeyLimit
- RemoteCommand
- RemoteForward
- RequestTTY
- SendEnv
- ServerAliveInterval
- ServerAliveCountMax
- SetEnv
- StreamLocalBindMask
- StreamLocalBindUnlink
- StrictHostKeyChecking
- TCPKeepAlive
- Tunnel
- TunnelDevice
- UpdateHostKeys
- User
- UserKnownHostsFile
- VerifyHostKeyDNS
- VisualHostKey
- XAuthLocation
-p
port- Port to connect to on the remote host. This can be specified on a per-host basis in the configuration file.
-Q
query_option- Queries
ssh
for the algorithms supported for the specified version 2. The available features are: cipher (supported symmetric ciphers), cipher-auth (supported symmetric ciphers that support authenticated encryption), help (supported query terms for use with the-Q
flag), mac (supported message integrity codes), kex (key exchange algorithms), key (key types), key-cert (certificate key types), key-plain (non-certificate key types), key-sig (all key types and signature algorithms), protocol-version (supported SSH protocol versions), and sig (supported signature algorithms). Alternatively, any keyword from ssh_config(5) or sshd_config(5) that takes an algorithm list may be used as an alias for the corresponding query_option. -q
- Quiet mode. Causes most warning and diagnostic messages to be suppressed.
-R
[bind_address:]port:host:hostport-R
[bind_address:]port:local_socket-R
remote_socket:host:hostport-R
remote_socket:local_socket-R
[bind_address:]port- Specifies that connections to the given TCP port or Unix socket on the
remote (server) host are to be forwarded to the local side.
This works by allocating a socket to listen to either a TCP port or to a Unix socket on the remote side. Whenever a connection is made to this port or Unix socket, the connection is forwarded over the secure channel, and a connection is made from the local machine to either an explicit destination specified by host port hostport, or local_socket, or, if no explicit destination was specified,
ssh
will act as a SOCKS 4/5 proxy and forward connections to the destinations requested by the remote SOCKS client.Port forwardings can also be specified in the configuration file. Privileged ports can be forwarded only when logging in as root on the remote machine. IPv6 addresses can be specified by enclosing the address in square brackets.
By default, TCP listening sockets on the server will be bound to the loopback interface only. This may be overridden by specifying a bind_address. An empty bind_address, or the address ‘
*
’, indicates that the remote socket should listen on all interfaces. Specifying a remote bind_address will only succeed if the server'sGatewayPorts
option is enabled (see sshd_config(5)).If the port argument is ‘
0
’, the listen port will be dynamically allocated on the server and reported to the client at run time. When used together with-O forward
the allocated port will be printed to the standard output. -S
ctl_path- Specifies the location of a control socket for connection sharing, or the
string “none” to disable connection sharing. Refer to the
description of
ControlPath
andControlMaster
in ssh_config(5) for details. -s
- May be used to request invocation of a subsystem on the remote system. Subsystems facilitate the use of SSH as a secure transport for other applications (e.g. sftp(1)). The subsystem is specified as the remote command.
-T
- Disable pseudo-terminal allocation.
-t
- Force pseudo-terminal allocation. This can be used to execute arbitrary
screen-based programs on a remote machine, which can be very useful, e.g.
when implementing menu services. Multiple
-t
options force tty allocation, even ifssh
has no local tty. -V
- Display the version number and exit.
-v
- Verbose mode. Causes
ssh
to print debugging messages about its progress. This is helpful in debugging connection, authentication, and configuration problems. Multiple-v
options increase the verbosity. The maximum is 3. -W
host:port- Requests that standard input and output on the client be forwarded to
host on port over the secure
channel. Implies
-N
,-T
,ExitOnForwardFailure
andClearAllForwardings
, though these can be overridden in the configuration file or using-o
command line options. -w
local_tun[:remote_tun]- Requests tunnel device forwarding with the specified
tun(4) devices between the client (local_tun)
and the server (remote_tun).
The devices may be specified by numerical ID or the keyword “any”, which uses the next available tunnel device. If remote_tun is not specified, it defaults to “any”. See also the
Tunnel
andTunnelDevice
directives in ssh_config(5).If the
Tunnel
directive is unset, it will be set to the default tunnel mode, which is “point-to-point”. If a differentTunnel
forwarding mode it desired, then it should be specified before-w
. -X
- Enables X11 forwarding. This can also be specified on a per-host basis in
a configuration file.
X11 forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the user's X authorization database) can access the local X11 display through the forwarded connection. An attacker may then be able to perform activities such as keystroke monitoring.
For this reason, X11 forwarding is subjected to X11 SECURITY extension restrictions by default. Please refer to the
ssh
-Y
option and theForwardX11Trusted
directive in ssh_config(5) for more information. -x
- Disables X11 forwarding.
-Y
- Enables trusted X11 forwarding. Trusted X11 forwardings are not subjected to the X11 SECURITY extension controls.
-y
- Send log information using the syslog(3) system module. By default this information is sent to stderr.
ssh
may additionally obtain configuration
data from a per-user configuration file and a system-wide configuration
file. The file format and configuration options are described in
ssh_config(5).
AUTHENTICATION
The OpenSSH SSH client supports SSH protocol 2.
The methods available for authentication are: GSSAPI-based
authentication, host-based authentication, public key authentication,
challenge-response authentication, and password authentication.
Authentication methods are tried in the order specified above, though
PreferredAuthentications
can be used to change the
default order.
Host-based authentication works as follows: If the machine the user logs in from is listed in /etc/hosts.equiv or /etc/shosts.equiv on the remote machine, the user is non-root and the user names are the same on both sides, or if the files ~/.rhosts or ~/.shosts exist in the user's home directory on the remote machine and contain a line containing the name of the client machine and the name of the user on that machine, the user is considered for login. Additionally, the server must be able to verify the client's host key (see the description of /etc/ssh/ssh_known_hosts and ~/.ssh/known_hosts, below) for login to be permitted. This authentication method closes security holes due to IP spoofing, DNS spoofing, and routing spoofing. [Note to the administrator: /etc/hosts.equiv, ~/.rhosts, and the rlogin/rsh protocol in general, are inherently insecure and should be disabled if security is desired.]
Public key authentication works as follows: The scheme is based on
public-key cryptography, using cryptosystems where encryption and decryption
are done using separate keys, and it is unfeasible to derive the decryption
key from the encryption key. The idea is that each user creates a
public/private key pair for authentication purposes. The server knows the
public key, and only the user knows the private key.
ssh
implements public key authentication protocol
automatically, using one of the DSA, ECDSA, Ed25519 or RSA algorithms. The
HISTORY section of ssl(8) contains a brief discussion of the DSA and RSA
algorithms.
The file ~/.ssh/authorized_keys lists the
public keys that are permitted for logging in. When the user logs in, the
ssh
program tells the server which key pair it would
like to use for authentication. The client proves that it has access to the
private key and the server checks that the corresponding public key is
authorized to accept the account.
The server may inform the client of errors that prevented public
key authentication from succeeding after authentication completes using a
different method. These may be viewed by increasing the
LogLevel
to DEBUG
or higher
(e.g. by using the -v
flag).
The user creates his/her key pair by running ssh-keygen(1). This stores the private key in ~/.ssh/id_dsa (DSA), ~/.ssh/id_ecdsa (ECDSA), ~/.ssh/id_ecdsa_sk (authenticator-hosted ECDSA), ~/.ssh/id_ed25519 (Ed25519), ~/.ssh/id_ed25519_sk (authenticator-hosted Ed25519), or ~/.ssh/id_rsa (RSA) and stores the public key in ~/.ssh/id_dsa.pub (DSA), ~/.ssh/id_ecdsa.pub (ECDSA), ~/.ssh/id_ecdsa_sk.pub (authenticator-hosted ECDSA), ~/.ssh/id_ed25519.pub (Ed25519), ~/.ssh/id_ed25519_sk.pub (authenticator-hosted Ed25519), or ~/.ssh/id_rsa.pub (RSA) in the user's home directory. The user should then copy the public key to ~/.ssh/authorized_keys in his/her home directory on the remote machine. The authorized_keys file corresponds to the conventional ~/.rhosts file, and has one key per line, though the lines can be very long. After this, the user can log in without giving the password.
A variation on public key authentication is available in the form of certificate authentication: instead of a set of public/private keys, signed certificates are used. This has the advantage that a single trusted certification authority can be used in place of many public/private keys. See the CERTIFICATES section of ssh-keygen(1) for more information.
The most convenient way to use public key or certificate
authentication may be with an authentication agent. See
ssh-agent(1) and (optionally) the
AddKeysToAgent
directive in
ssh_config(5) for more information.
Challenge-response authentication works as follows: The server sends an arbitrary "challenge" text, and prompts for a response. Examples of challenge-response authentication include BSD Authentication (see login.conf(5)) and PAM (some non-OpenBSD systems).
Finally, if other authentication methods fail,
ssh
prompts the user for a password. The password is
sent to the remote host for checking; however, since all communications are
encrypted, the password cannot be seen by someone listening on the
network.
ssh
automatically maintains and checks a
database containing identification for all hosts it has ever been used with.
Host keys are stored in ~/.ssh/known_hosts in the
user's home directory. Additionally, the file
/etc/ssh/ssh_known_hosts is automatically checked
for known hosts. Any new hosts are automatically added to the user's file.
If a host's identification ever changes, ssh
warns
about this and disables password authentication to prevent server spoofing
or man-in-the-middle attacks, which could otherwise be used to circumvent
the encryption. The StrictHostKeyChecking
option can
be used to control logins to machines whose host key is not known or has
changed.
When the user's identity has been accepted by the server, the server either executes the given command in a non-interactive session or, if no command has been specified, logs into the machine and gives the user a normal shell as an interactive session. All communication with the remote command or shell will be automatically encrypted.
If an interactive session is requested ssh
by default will only request a pseudo-terminal (pty) for interactive
sessions when the client has one. The flags -T
and
-t
can be used to override this behaviour.
If a pseudo-terminal has been allocated the user may use the escape characters noted below.
If no pseudo-terminal has been allocated, the session is transparent and can be used to reliably transfer binary data. On most systems, setting the escape character to “none” will also make the session transparent even if a tty is used.
The session terminates when the command or shell on the remote machine exits and all X11 and TCP connections have been closed.
ESCAPE CHARACTERS
When a pseudo-terminal has been requested,
ssh
supports a number of functions through the use
of an escape character.
A single tilde character can be sent as ~~
or by following the tilde by a character other than those described below.
The escape character must always follow a newline to be interpreted as
special. The escape character can be changed in configuration files using
the EscapeChar
configuration directive or on the
command line by the -e
option.
The supported escapes (assuming the default
‘~
’) are:
~.
- Disconnect.
~^Z
- Background
ssh
. ~#
- List forwarded connections.
~&
- Background
ssh
at logout when waiting for forwarded connection / X11 sessions to terminate. ~?
- Display a list of escape characters.
~B
- Send a BREAK to the remote system (only useful if the peer supports it).
~C
- Open command line. Currently this allows the addition of port forwardings
using the
-L
,-R
and-D
options (see above). It also allows the cancellation of existing port-forwardings with-KL
[bind_address:]port for local,-KR
[bind_address:]port for remote and-KD
[bind_address:]port for dynamic port-forwardings.!
command allows the user to execute a local command if thePermitLocalCommand
option is enabled in ssh_config(5). Basic help is available, using the-h
option. ~R
- Request rekeying of the connection (only useful if the peer supports it).
~V
- Decrease the verbosity (
LogLevel
) when errors are being written to stderr. ~v
- Increase the verbosity (
LogLevel
) when errors are being written to stderr.
TCP FORWARDING
Forwarding of arbitrary TCP connections over a secure channel can be specified either on the command line or in a configuration file. One possible application of TCP forwarding is a secure connection to a mail server; another is going through firewalls.
In the example below, we look at encrypting communication for an
IRC client, even though the IRC server it connects to does not directly
support encrypted communication. This works as follows: the user connects to
the remote host using ssh
, specifying the ports to
be used to forward the connection. After that it is possible to start the
program locally, and ssh
will encrypt and forward
the connection to the remote server.
The following example tunnels an IRC session from the client to an IRC server at “server.example.com”, joining channel “#users”, nickname “pinky”, using the standard IRC port, 6667:
$ ssh -f -L 6667:localhost:6667 server.example.com sleep 10 $ irc -c '#users' pinky IRC/127.0.0.1
The -f
option backgrounds
ssh
and the remote command “sleep 10”
is specified to allow an amount of time (10 seconds, in the example) to
start the program which is going to use the tunnel. If no connections are
made within the time specified, ssh
will exit.
X11 FORWARDING
If the ForwardX11
variable is set to
“yes” (or see the description of the
-X
, -x
, and
-Y
options above) and the user is using X11 (the
DISPLAY
environment variable is set), the connection
to the X11 display is automatically forwarded to the remote side in such a
way that any X11 programs started from the shell (or command) will go
through the encrypted channel, and the connection to the real X server will
be made from the local machine. The user should not manually set
DISPLAY
. Forwarding of X11 connections can be
configured on the command line or in configuration files.
The DISPLAY
value set by
ssh
will point to the server machine, but with a
display number greater than zero. This is normal, and happens because
ssh
creates a “proxy” X server on the
server machine for forwarding the connections over the encrypted
channel.
ssh
will also automatically set up
Xauthority data on the server machine. For this purpose, it will generate a
random authorization cookie, store it in Xauthority on the server, and
verify that any forwarded connections carry this cookie and replace it by
the real cookie when the connection is opened. The real authentication
cookie is never sent to the server machine (and no cookies are sent in the
plain).
If the ForwardAgent
variable is set to
“yes” (or see the description of the
-A
and -a
options above) and
the user is using an authentication agent, the connection to the agent is
automatically forwarded to the remote side.
VERIFYING HOST KEYS
When connecting to a server for the first time, a fingerprint of
the server's public key is presented to the user (unless the option
StrictHostKeyChecking
has been disabled).
Fingerprints can be determined using
ssh-keygen(1):
$ ssh-keygen -l -f
/etc/ssh/ssh_host_rsa_key
If the fingerprint is already known, it can be matched and the key
can be accepted or rejected. If only legacy (MD5) fingerprints for the
server are available, the
ssh-keygen(1) -E
option may be used
to downgrade the fingerprint algorithm to match.
Because of the difficulty of comparing host keys just
by looking at fingerprint strings, there is also support to compare host
keys visually, using
random art. By
setting the VisualHostKey
option to
“yes”, a small ASCII graphic gets displayed on every login to
a server, no matter if the session itself is interactive or not. By learning
the pattern a known server produces, a user can easily find out that the
host key has changed when a completely different pattern is displayed.
Because these patterns are not unambiguous however, a pattern that looks
similar to the pattern remembered only gives a good probability that the
host key is the same, not guaranteed proof.
To get a listing of the fingerprints along with their random art for all known hosts, the following command line can be used:
$ ssh-keygen -lv -f
~/.ssh/known_hosts
If the fingerprint is unknown, an alternative method of verification is available: SSH fingerprints verified by DNS. An additional resource record (RR), SSHFP, is added to a zonefile and the connecting client is able to match the fingerprint with that of the key presented.
In this example, we are connecting a client to a server, “host.example.com”. The SSHFP resource records should first be added to the zonefile for host.example.com:
$ ssh-keygen -r host.example.com.
The output lines will have to be added to the zonefile. To check that the zone is answering fingerprint queries:
$ dig -t SSHFP
host.example.com
Finally the client connects:
$ ssh -o "VerifyHostKeyDNS ask" host.example.com [...] Matching host key fingerprint found in DNS. Are you sure you want to continue connecting (yes/no)?
See the VerifyHostKeyDNS
option in
ssh_config(5) for more information.
SSH-BASED VIRTUAL PRIVATE NETWORKS
ssh
contains support for Virtual Private
Network (VPN) tunnelling using the
tun(4) network pseudo-device, allowing two networks to be joined
securely. The
sshd_config(5) configuration option
PermitTunnel
controls whether the server supports
this, and at what level (layer 2 or 3 traffic).
The following example would connect client network 10.0.50.0/24 with remote network 10.0.99.0/24 using a point-to-point connection from 10.1.1.1 to 10.1.1.2, provided that the SSH server running on the gateway to the remote network, at 192.168.1.15, allows it.
On the client:
# ssh -f -w 0:1 192.168.1.15 true # ifconfig tun0 10.1.1.1 10.1.1.2 netmask 255.255.255.252 # route add 10.0.99.0/24 10.1.1.2
On the server:
# ifconfig tun1 10.1.1.2 10.1.1.1 netmask 255.255.255.252 # route add 10.0.50.0/24 10.1.1.1
Client access may be more finely tuned via the
/root/.ssh/authorized_keys file (see below) and the
PermitRootLogin
server option. The following entry
would permit connections on
tun(4) device 1 from user “jane” and on tun device 2
from user “john”, if PermitRootLogin
is set to “forced-commands-only”:
tunnel="1",command="sh /etc/netstart tun1" ssh-rsa ... jane tunnel="2",command="sh /etc/netstart tun2" ssh-rsa ... john
Since an SSH-based setup entails a fair amount of overhead, it may be more suited to temporary setups, such as for wireless VPNs. More permanent VPNs are better provided by tools such as ipsecctl(8) and isakmpd(8).
ENVIRONMENT
ssh
will normally set the following
environment variables:
DISPLAY
- The
DISPLAY
variable indicates the location of the X11 server. It is automatically set byssh
to point to a value of the form “hostname:n”, where “hostname” indicates the host where the shell runs, and ‘n’ is an integer ≥ 1.ssh
uses this special value to forward X11 connections over the secure channel. The user should normally not setDISPLAY
explicitly, as that will render the X11 connection insecure (and will require the user to manually copy any required authorization cookies). HOME
- Set to the path of the user's home directory.
LOGNAME
- Synonym for
USER
; set for compatibility with systems that use this variable. MAIL
- Set to the path of the user's mailbox.
PATH
- Set to the default
PATH
, as specified when compilingssh
. SSH_ASKPASS
- If
ssh
needs a passphrase, it will read the passphrase from the current terminal if it was run from a terminal. Ifssh
does not have a terminal associated with it butDISPLAY
andSSH_ASKPASS
are set, it will execute the program specified bySSH_ASKPASS
and open an X11 window to read the passphrase. This is particularly useful when callingssh
from a .xsession or related script. (Note that on some machines it may be necessary to redirect the input from /dev/null to make this work.) SSH_AUTH_SOCK
- Identifies the path of a UNIX-domain socket used to communicate with the agent.
SSH_CONNECTION
- Identifies the client and server ends of the connection. The variable contains four space-separated values: client IP address, client port number, server IP address, and server port number.
SSH_ORIGINAL_COMMAND
- This variable contains the original command line if a forced command is executed. It can be used to extract the original arguments.
SSH_TTY
- This is set to the name of the tty (path to the device) associated with the current shell or command. If the current session has no tty, this variable is not set.
SSH_TUNNEL
- Optionally set by sshd(8) to contain the interface names assigned if tunnel forwarding was requested by the client.
SSH_USER_AUTH
- Optionally set by sshd(8), this variable may contain a pathname to a file that lists the authentication methods successfully used when the session was established, including any public keys that were used.
TZ
- This variable is set to indicate the present time zone if it was set when the daemon was started (i.e. the daemon passes the value on to new connections).
USER
- Set to the name of the user logging in.
Additionally, ssh
reads
~/.ssh/environment, and adds lines of the format
“VARNAME=value” to the environment if the file exists and
users are allowed to change their environment. For more information, see the
PermitUserEnvironment
option in
sshd_config(5).
FILES
- ~/.rhosts
- This file is used for host-based authentication (see above). On some machines this file may need to be world-readable if the user's home directory is on an NFS partition, because sshd(8) reads it as root. Additionally, this file must be owned by the user, and must not have write permissions for anyone else. The recommended permission for most machines is read/write for the user, and not accessible by others.
- ~/.shosts
- This file is used in exactly the same way as .rhosts, but allows host-based authentication without permitting login with rlogin/rsh.
- ~/.ssh/
- This directory is the default location for all user-specific configuration and authentication information. There is no general requirement to keep the entire contents of this directory secret, but the recommended permissions are read/write/execute for the user, and not accessible by others.
- ~/.ssh/authorized_keys
- Lists the public keys (DSA, ECDSA, Ed25519, RSA) that can be used for logging in as this user. The format of this file is described in the sshd(8) manual page. This file is not highly sensitive, but the recommended permissions are read/write for the user, and not accessible by others.
- ~/.ssh/config
- This is the per-user configuration file. The file format and configuration options are described in ssh_config(5). Because of the potential for abuse, this file must have strict permissions: read/write for the user, and not writable by others.
- ~/.ssh/environment
- Contains additional definitions for environment variables; see ENVIRONMENT, above.
- ~/.ssh/id_dsa
- ~/.ssh/id_ecdsa
- ~/.ssh/id_ecdsa_sk
- ~/.ssh/id_ed25519
- ~/.ssh/id_ed25519_sk
- ~/.ssh/id_rsa
- Contains the private key for authentication. These files contain sensitive
data and should be readable by the user but not accessible by others
(read/write/execute).
ssh
will simply ignore a private key file if it is accessible by others. It is possible to specify a passphrase when generating the key which will be used to encrypt the sensitive part of this file using AES-128. - ~/.ssh/id_dsa.pub
- ~/.ssh/id_ecdsa.pub
- ~/.ssh/id_ecdsa_sk.pub
- ~/.ssh/id_ed25519.pub
- ~/.ssh/id_ed25519_sk.pub
- ~/.ssh/id_rsa.pub
- Contains the public key for authentication. These files are not sensitive and can (but need not) be readable by anyone.
- ~/.ssh/known_hosts
- Contains a list of host keys for all hosts the user has logged into that are not already in the systemwide list of known host keys. See sshd(8) for further details of the format of this file.
- ~/.ssh/rc
- Commands in this file are executed by
ssh
when the user logs in, just before the user's shell (or command) is started. See the sshd(8) manual page for more information. - /etc/hosts.equiv
- This file is for host-based authentication (see above). It should only be writable by root.
- /etc/shosts.equiv
- This file is used in exactly the same way as hosts.equiv, but allows host-based authentication without permitting login with rlogin/rsh.
- /etc/ssh/ssh_config
- Systemwide configuration file. The file format and configuration options are described in ssh_config(5).
- /etc/ssh/ssh_host_key
- /etc/ssh/ssh_host_dsa_key
- /etc/ssh/ssh_host_ecdsa_key
- /etc/ssh/ssh_host_ed25519_key
- /etc/ssh/ssh_host_rsa_key
- These files contain the private parts of the host keys and are used for host-based authentication.
- /etc/ssh/ssh_known_hosts
- Systemwide list of known host keys. This file should be prepared by the system administrator to contain the public host keys of all machines in the organization. It should be world-readable. See sshd(8) for further details of the format of this file.
- /etc/ssh/sshrc
- Commands in this file are executed by
ssh
when the user logs in, just before the user's shell (or command) is started. See the sshd(8) manual page for more information.
EXIT STATUS
ssh
exits with the exit status of the
remote command or with 255 if an error occurred.
SEE ALSO
scp(1), sftp(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh-keyscan(1), tun(4), ssh_config(5), ssh-keysign(8), sshd(8)
STANDARDS
S. Lehtinen and C. Lonvick, The Secure Shell (SSH) Protocol Assigned Numbers, RFC 4250, January 2006.
T. Ylonen and C. Lonvick, The Secure Shell (SSH) Protocol Architecture, RFC 4251, January 2006.
T. Ylonen and C. Lonvick, The Secure Shell (SSH) Authentication Protocol, RFC 4252, January 2006.
T. Ylonen and C. Lonvick, The Secure Shell (SSH) Transport Layer Protocol, RFC 4253, January 2006.
T. Ylonen and C. Lonvick, The Secure Shell (SSH) Connection Protocol, RFC 4254, January 2006.
J. Schlyter and W. Griffin, Using DNS to Securely Publish Secure Shell (SSH) Key Fingerprints, RFC 4255, January 2006.
F. Cusack and M. Forssen, Generic Message Exchange Authentication for the Secure Shell Protocol (SSH), RFC 4256, January 2006.
J. Galbraith and P. Remaker, The Secure Shell (SSH) Session Channel Break Extension, RFC 4335, January 2006.
M. Bellare, T. Kohno, and C. Namprempre, The Secure Shell (SSH) Transport Layer Encryption Modes, RFC 4344, January 2006.
B. Harris, Improved Arcfour Modes for the Secure Shell (SSH) Transport Layer Protocol, RFC 4345, January 2006.
M. Friedl, N. Provos, and W. Simpson, Diffie-Hellman Group Exchange for the Secure Shell (SSH) Transport Layer Protocol, RFC 4419, March 2006.
J. Galbraith and R. Thayer, The Secure Shell (SSH) Public Key File Format, RFC 4716, November 2006.
D. Stebila and J. Green, Elliptic Curve Algorithm Integration in the Secure Shell Transport Layer, RFC 5656, December 2009.
A. Perrig and D. Song, Hash Visualization: a New Technique to improve Real-World Security, 1999, International Workshop on Cryptographic Techniques and E-Commerce (CrypTEC '99).
AUTHORS
OpenSSH is a derivative of the original and free ssh 1.2.12 release by Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt and Dug Song removed many bugs, re-added newer features and created OpenSSH. Markus Friedl contributed the support for SSH protocol versions 1.5 and 2.0.