systrace(4) - OpenBSD manual pages

NAME

systrace — enforce and generate policies for system calls

DESCRIPTION

systrace attaches to processes and enforces policies for system calls. A pseudo-device, /dev/systrace, allows userland processes to control the behavior of systrace through an ioctl(2) interface.

SYSTEM CALL POLICIES

systrace can assign the following policies to system calls:

SYSTR_POLICY_ASK: Send a message of the type SYSTR_MSG_ASK, and put the process to sleep until a STRIOCANSWER ioctl(2) is made.
SYSTR_POLICY_PERMIT: Immediately allow the system call.
SYSTR_POLICY_NEVER: Immediately return an error code.
SYSTR_POLICY_KILL: Sends SIGKILL to the traced process.

SYSTRACE MESSAGES

A read(2) operation on the systrace pseudo-device will block if there are no pending messages, or return the following structure:

struct str_message {
	int msg_type;
#define SYSTR_MSG_ASK		1
#define SYSTR_MSG_RES		2
#define SYSTR_MSG_EMUL		3
#define SYSTR_MSG_CHILD		4
#define SYSTR_MSG_UGID		5
#define SYSTR_MSG_POLICYFREE	6
#define SYSTR_MSG_EXECVE	7
	pid_t msg_pid;
	u_int16_t msg_seqnr;	/* answer has to match seqnr */
	short msg_policy;
	union {
		struct str_msg_emul msg_emul;
		struct str_msg_ugid msg_ugid;
		struct str_msg_ask msg_ask;
		struct str_msg_child msg_child;
		struct str_msg_execve msg_execve;
	} msg_data;
};

struct str_msg_emul {
	char emul[SYSTR_EMULEN];
};

struct str_msg_ugid {
	uid_t uid;
	gid_t gid;
};

struct str_msg_execve {
	char path[MAXPATHLEN];
};

struct str_msg_ask {
	int code;
	int argsize;
	register_t args[SYSTR_MAXARGS];
	register_t rval[2];
	int result;
};

struct str_msg_child {
	pid_t new_pid;		/* -1 if child exited */
};

These messages are all sent to the userland control process.

SYSTR_MSG_ASK: This message is sent whenever the kernel does not have a cached simple policy for system call number code within the currently set emulation.
SYSTR_MSG_RES: This message is sent whenever a system call is flagged with SYSTR_FLAGS_RESULT.
SYSTR_MSG_EMUL: This message is sent whenever the emulation of a process changes.
SYSTR_MSG_CHILD: This message is sent whenever a process gains or loses a child. In the latter case, the event is raised when the child exits, but not when it is reaped.
SYSTR_MSG_UGID: This message is sent whenever the effective UID or GID has changed during the execution of a system call.
SYSTR_MSG_POLICYFREE: This is sent whenever the kernel frees the policy identified by msg_policy.
SYSTR_MSG_EXECVE: This message is sent whenever, before a call to execve(2) a process is privileged (technically, the process has the PS_SUGID or PS_SUGIDEXEC flag set), but after the call these privileges have been dropped. The new image name is specified in the path argument.

IOCTL INTERFACE

systrace supports the following ioctl(2) commands:

STRIOCCLONE int *

Return a systrace file descriptor for further ioctl(2) operations. The returned systrace file descriptor is not inherited by a child created with fork(2). Similarly, they cannot be passed across UNIX-domain sockets.

STRIOCATTACH pid_t *

Attach to a process, unless:

It's the process that's doing the attaching.
It's a system process.
It's being traced already.
You do not own the process and you're not root.
It's init(8), and the kernel was not compiled with option INSECURE.

STRIOCDETACH pid_t *

Wake up a process if it is waiting for an answer, and detach from it.

STRIOCANSWER struct systrace_answer *

Tell systrace what to do with a system call that was assigned a policy of SYSTR_POLICY_ASK.

struct systrace_answer {
	pid_t stra_pid;	    /* PID of process being traced */
	u_int16_t stra_seqnr;
	short reserved;
	uid_t stra_seteuid; /* Elevated privileges for syscall */
	uid_t stra_setegid;
	int stra_policy;    /* Policy to assign */
	int stra_error;	    /* Return value of denied syscall
			       (will return EPERM if zero) */
	int stra_flags;
#define	SYSTR_FLAGS_RESULT  0x001    /* Report syscall result */
#define SYSTR_FLAGS_SETEUID 0x002
#define SYSTR_FLAGS_SETEGID 0x004
};

STRIOCREPORT pid_t *

Report the current emulation a process is using inside the msg_emul structure.

STRIOCREPLACE struct systrace_replace *

Arrange for system call arguments to be replaced by arguments supplied by the monitoring process.

struct systrace_replace {
	pid_t strr_pid;
	u_int16_t strr_seqnr;
	int16_t reserved;
	int strr_nrepl;		/* # of arguments to replace */
	caddr_t	strr_base;		/* Base user memory */
	size_t strr_len;		/* Length of memory */
	int strr_argind[SYSTR_MAXARGS];	/* Argument indexes */
	size_t strr_off[SYSTR_MAXARGS];	/* Argument offsets */
	size_t strr_offlen[SYSTR_MAXARGS]; /* Argument sizes */
	int32_t strr_flags[SYSTR_MAXARGS];
};

STRIOCIO struct systrace_io *

Copy data in/out of the process being traced.

struct systrace_io {
	pid_t strio_pid;    /* PID of process being traced */
	int strio_op;
#define	SYSTR_READ	1
#define	SYSTR_WRITE	2
	void *strio_offs;
	void *strio_addr;
	size_t strio_len;
};

STRIOCPOLICY struct systrace_policy *

Manipulate the set of policies.

struct systrace_policy {
	int strp_op;
#define	SYSTR_POLICY_NEW	1  /* Allocate a new policy */
#define	SYSTR_POLICY_ASSIGN	2  /* Assign policy to process */
#define	SYSTR_POLICY_MODIFY	3  /* Modify an entry */
	int strp_num;
	union {
		struct {
			short code;
#define SYSTR_POLICY_ASK	0
#define SYSTR_POLICY_PERMIT	1
#define SYSTR_POLICY_NEVER	2
			short policy;
		} assign;
		pid_t pid;
		int maxents;
	} strp_data;
#define strp_pid	strp_data.pid
#define strp_maxents	strp_data.maxents
#define strp_code	strp_data.assign.code
#define strp_policy	strp_data.assign.policy
};

The SYSTR_POLICY_NEW operation allocates a new policy of strp_maxents entries with each initialized to SYSTR_POLICY_ASK, and returns the new policy number into strp_num.

The SYSTR_POLICY_ASSIGN operation attaches the policy identified by strp_num to strp_pid, with a maximum of strp_maxents entries.

The SYSTR_POLICY_MODIFY operation changes the entry indexed by strp_code to strp_policy.

STRIOCGETCWD pid_t *

Set the working directory of the current process to that of the named process.

STRIOCRESCWD

Restore the working directory of the current process.

STRIOCINJECT

Inject a buffer into the stackgap of the traced process. This accommodates for the manipulation of non-scalar arguments. The actual replacement is not done until system call time, and its presence in the stackgap is only guaranteed for the duration of that system call.

struct systrace_inject {
	/* On return, this contains the stackgap address. */
	caddr_t stri_addr;
	size_t  stri_len;
	pid_t   stri_pid;
};

STRIOCSCRIPTNAME struct systrace_scriptname *

Set the path of executed scripts to sn_scriptname.

struct systrace_scriptname {
	pid_t sn_pid;
	char  sn_scriptname[MAXPATHLEN];
};

FILES

/dev/systrace: system call tracing facility

EXAMPLES

The following is an example program that traces another process, printing out the path to any open(2) system calls it performs.

#include <sys/param.h>
#include <sys/ioctl.h>
#include <dev/systrace.h>

#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>

/*
 * Number of system calls that will be covered in our policy.
 */
#define NSYSCALLS 512

int
main(int argc, char *argv[])
{
	struct systrace_policy strpol;
	struct systrace_answer strans;
	struct systrace_io strio;
	struct str_message strmsg;
	int fd, cfd, pid, i;
	ssize_t n;
	void *p;
	char c;

	if ((fd = open("/dev/systrace", O_RDONLY)) == -1)
		err(1, "/dev/systrace");

	/*
	 * Get a systrace descriptor.
	 */
	if (ioctl(fd, STRIOCCLONE, &cfd) == -1)
		err(1, "STRIOCCLONE");
	close(fd);

	/* Gather the PID of a process to systrace from somewhere. */
	/* ... */

	if (ioctl(cfd, STRIOCATTACH, &pid) == -1)
		err(1, "STRIOCATTACH");

	/* Install one policy. */
	strpol.strp_op = SYSTR_POLICY_NEW;
	strpol.strp_maxents = NSYSCALLS;

	if (ioctl(cfd, STRIOCPOLICY, &strpol) == -1)
		err(1, "STRIOCPOLICY NEW");

	strpol.strp_op = SYSTR_POLICY_ASSIGN;
	strpol.strp_pid = pid;

	if (ioctl(cfd, STRIOCPOLICY, &strpol) == -1)
		err(1, "STRIOCPOLICY ASSIGN");

	/* Permit all system calls. */
	for (i = 0; i < NSYSCALLS; i++) {
		strpol.strp_op = SYSTR_POLICY_MODIFY;
		strpol.strp_code = i;
		strpol.strp_policy = SYSTR_POLICY_PERMIT;

		if (ioctl(cfd, STRIOCPOLICY, &strpol) == -1)
			err(1, "STRIOCPOLICY MODIFY");
	}

	/* Ask us about open(2) system calls. */
	strpol.strp_op = SYSTR_POLICY_MODIFY;
	strpol.strp_code = 5; /* open(2) */
	strpol.strp_policy = SYSTR_POLICY_ASK;

	if (ioctl(cfd, STRIOCPOLICY, &strpol) == -1)
		err(1, "STRIOCPOLICY MODIFY");

	/*
	 * Now this process just answers requests for the operations the
	 * traced process performs that we have requested systrace to ask
	 * us about.
	 */
	while ((n = read(cfd, &strmsg, sizeof(strmsg))) ==
	    sizeof(strmsg)) {
		switch (strmsg.msg_type) {
		case SYSTR_MSG_ASK:
			/* Print out the path argument to open(2). */
			memcpy(&p, &strmsg.msg_data.msg_ask.args,
			    sizeof(p));
			printf("open(");
			do {
				memset(&strio, 0, sizeof(strio));
				strio.strio_pid = strmsg.msg_pid;
				strio.strio_op = SYSTR_READ;
				strio.strio_offs = p;
				strio.strio_addr = &c;
				strio.strio_len = 1;

				if (ioctl(cfd, STRIOCIO, &strio) == -1)
					err(1, "STRIOCIO");
				putchar(c);
				(unsigned char *)p += sizeof(char);
			} while (c != '\0');
			printf(")\n");

			memset(&strans, 0, sizeof(strans));
			strans.stra_pid = strmsg.msg_pid;
			strans.stra_seqnr = strmsg.msg_seqnr;
			strans.stra_policy = SYSTR_POLICY_PERMIT;

			if (ioctl(cfd, STRIOCANSWER, &strans) == -1)
				err(1, "STRIOCANSWER");
			break;
		}
	}
	if (n == -1)
		err(1, "read");
	close(cfd);
	exit(0);
}

HISTORY

The systrace facility first appeared in OpenBSD 3.2.

CAVEATS

When creating new policies, if strp_maxents is not large enough to accommodate any system calls needed for fundamental process operations, the traced process will block forever.

OpenBSD manual page server