NAME
kate
—
AMD K8 temperature sensor
SYNOPSIS
kate* at pci?
DESCRIPTION
The kate
driver provides support for the
temperature sensors available in the AMD K8 family of processors.
These sensors were officially introduced with Revision F Family 0Fh processors, and provide 1 degC accuracy. Precision was improved in Revision G chips, which provide two more bits for 0.25 degC steppings. Each core may have two temperature sensors, and there may be up to two cores per package.
Multiprocessor systems would have one instance of
kate
per each chip. In each instance,
temp0 and temp1 sensors
correspond to the temperature sensors on the first core, whereas
temp2 and temp3 correspond to
the temperature sensors on the second core. As such, single core chips may
have two sensors, and dual-core dual-processor systems may have as many as 8
temperature sensors in total.
Since many prior revisions of the chips appear to have valid
readings for at least some temperature sensors in the same address space as
the aforementioned revisions, the driver may also attach on such older
revisions provided that it finds some sensor readings that appear valid.
However, in such cases kate
would not print the core
revision information into the dmesg.
Sensor values are made available through the sysctl(8) interface.
SEE ALSO
intro(4), pci(4), sensorsd(8), sysctl(8)
BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors, Publication # 32559, pp. 21--23 and pp. 179--184, July 2007.
Revision Guide for AMD NPT Family 0Fh Processors, Publication # 33610, February 2008.
HISTORY
The kate
driver first appeared in
OpenBSD 4.4.
AUTHORS
The kate
driver was written by
Constantine A. Murenin
⟨cnst@openbsd.org⟩ whilst at the University of Waterloo.