OpenBSD manual page server

Manual Page Search Parameters
INTRO(4) Device Drivers Manual (hppa) INTRO(4)

introintroduction to special files and hardware support

This section describes the special files, related driver functions, and networking support available in the system. In this part of the manual, the SYNOPSIS section of each configurable device gives a sample specification for use in constructing a system description for the config(8) program. The DIAGNOSTICS section lists messages which may appear on the console and/or in the system error log /var/log/messages due to errors in device operation; see syslogd(8) for more information.

This section contains both devices which may be configured into the system and network related information. The networking support is introduced in netintro(4).

This section describes the hardware supported on the HP PA-RISC platform. Software support for these devices comes in two forms. A hardware device may be supported with a character or block , or it may be used within the networking subsystem and have a . Character and block devices are accessed through files in the file system of a special type; see mknod(8). Network interfaces are indirectly accessed through the interprocess communication facilities provided by the system; see socket(2).

A hardware device is identified to the system at configuration time and the appropriate device or network interface driver is then compiled into the system. When the resultant system is booted, the autoconfiguration facilities in the system probe for the device and, if found, enable the software support for it. If a device does not respond at autoconfiguration time it is not accessible at any time afterwards. To enable a device which did not autoconfigure, the system must be rebooted.

The autoconfiguration system is described in autoconf(4).

A list of HP 9000/700 models targetted for support is listed below, including basic system characteristics.

705 35 7000 32/64 N/A
710 50 7000 32/64 N/A
720 50 7000 128/256 EISA, GSC
730 66 7000 128/256 EISA, GSC
750 66 7000 256/256 4 EISA, 2 SGC
715 33 7100 64/64 EISA/SGC
715 50 7100 64/64 EISA/SGC
715 75 7100 256/256 EISA/SGC
725 50 7100 64/64 3 EISA, EISA/SGC
725 75 7100 256/256 3 EISA, EISA/SGC
735 100 7100 256/256 EISA, SGC
742i 50 7100 64/64 N/A
745i 50 7100 64/64 4 EISA
745i 100 7100 256/256 4 EISA
747i 50 7100 64/64 2 EISA, SGC, 6 VME
747i 100 7100 256/256 2 EISA, SGC, 6 VME
755 100 7100 256/256 4 EISA, 2 SGC
735 125 7150 256/256 EISA, SGC
755 125 7150 256/256 4 EISA, 2 SGC
712 60 7100LC 32/32 GIO, TSIO
712 80 7100LC 128/128 GIO, TSIO
712 100 7100LC 128/128 GIO, TSIO
715 64 7100LC 128/128 EISA/GSC
715 80 7100LC 128/128 EISA/GSC
715 100 7100LC 128/128 EISA/GSC
715XC 100 7100LC 512/512 EISA/GSC
725 64 7100LC 128/128 EISA, 3 EISA/GSC
725 100 7100LC 128/128 EISA, 3 EISA/GSC
743i 64 7100LC 128/128 2 GSC-M/2(4), VME
743i 100 7100LC 128/128 2 GSC-M/2(4), VME
748i 64 7100LC 128/128 2 GSC-M/2(4), 4 EISA/PCI, 6 VME
748i 100 7100LC 128/128 2 GSC-M/2(4), 4 EISA/PCI, 6 VME
SAIC 60 7100LC 32/32 GIO, TSIO, 2 PCMCIA
SAIC 80 7100LC 128/128 GIO, TSIO, 2 PCMCIA
J200 100 7200 256/256 GSC, 2 EISA, 2 EISA/GSC
J210 120 7200 256/256 GSC, 2 EISA, 2 EISA/GSC
J210XC 120 7200 1MB/1MB GSC, 2 EISA, 2 EISA/GSC
C100 100 7200 256/256 GSC, 3 EISA/GSC
C110 120 7200 256/256 GSC, 3 EISA/GSC
744 132 7300LC 64/64 2 GSC-M/2(4), VME
744 165 7300LC 64/64+512 2 GSC-M/2(4), VME
745 132 7300LC 64/64 2 GSC-M/2(4), 4 EISA/PCI
745 165 7300LC 64/64+512 2 GSC-M/2(4), 4 EISA/PCI
748 132 7300LC 64/64 2 GSC-M/2(4), 4 EISA/PCI, 6 VME
748 165 7300LC 64/64+512 2 GSC-M/2(4), 4 EISA/PCI, 6 VME
A180 180 7300LC 64/64 2 HSC/PCI
A180C 180 7300LC 64/64+1MB 2 HSC/PCI
B132L 132 7300LC 64/64(+1MB) GSC/PCI, GSC/PCI/EISA
B132L+ 132 7300LC 64/64(+1MB) GSC/PCI, GSC/PCI/EISA
B160L 160 7300LC 64/64(+1MB) GSC/PCI, GSC/PCI/EISA
B180L+ 180 7300LC 64/64(+1MB) GSC/PCI, GSC/PCI/EISA
C132L 132 7300LC 64/64(+1MB) 2 GSC/PCI/EISA, 2 GSC/EISA
C160L 160 7300LC 64/64(+1MB) 2 GSC/PCI/EISA, 2 GSC/EISA
RDI 132 7300LC 64/64(+1MB) 2 CardBus
RDI 160 7300LC 64/64(+1MB) 2 CardBus
RDI 180 7300LC 64/64(+1MB) 2 CardBus
C160 160 8000 512/512 2 GSC/PCI/EISA, 2 GSC/EISA
C180 180 8000 1024/1024 2 GSC/PCI/EISA, 2 GSC/EISA
J280 180 8000 1024/1024 3 GSC/PCI, PCI, PCI/EISA
J282 180 8000 1024/1024 3 GSC/PCI, PCI, PCI/EISA
C200 200 8200 512/1024 GSC/PCI/EISA, 3 GSC/PCI
C240 240 8200 2048/2048 GSC/PCI/EISA, 3 GSC/PCI
J2240 240 8200 2048/2048 3 GSC/PCI, PCI, PCI/EISA
C360 360 8500 512/1024 GSC/PCI/EISA, 3 GSC/PCI

A complete list of available devices is contained within the pages describing the system buses and controllers. For example, a PCI device would be listed in the pci(4) man page. The following buses and controllers list these devices:

cardbus(4)
introduction to CardBus support
gsc(4)
introduction to HP 9000/700 GSC bus support
hil(4)
introduction to HP-HIL support
onewire(4)
1-Wire bus
pci(4)
introduction to PCI bus support
pcmcia(4)
introduction to PCMCIA (PC Card) support
usb(4)
introduction to Universal Serial Bus support

autoconf(4), cpu(4), io(4), runway(4), config(8)

The hppa intro first appeared with OpenBSD 3.1.

September 3, 2011 OpenBSD-5.1