OpenBSD manual page server

NAME

rdist — remote file distribution client program

SYNOPSIS

DESCRIPTION

rdist is a program to maintain identical copies of files over multiple hosts. It preserves the owner, group, mode, and mtime of files if possible and can update programs that are executing.

rdist reads commands from distfile to direct the updating of files and/or directories. If distfile is ‘-’, the standard input is used. If no -f option is present, the program looks first for distfile, then Distfile, to use as the input. If no names are specified on the command line, rdist will update all of the files and directories listed in distfile. If the file /etc/Distfile exists, it will be run automatically by the clock daemon cron(8), via the system script daily(8).

If name is specified, it is taken to be the name of a file to be updated or the label of a command to execute. If label and file names conflict, it is assumed to be a label. These may be used together to update specific files using specific commands.

rdist uses a remote shell command to access each target host. By default, ssh(1) is used unless overridden by the -P option or the RSH environment variable. If the target host is the string “localhost” and the remote user name is the same as the local user name, rdist will run the command:

/bin/sh -c rdistd -S

Otherwise, rdist will run the command:

ssh <host> -l <login_name> rdistd -S

host is the name of the target host; login_name is the name of the user to make the connection as.

On each target host rdist will attempt to run the command:

rdistd -S

Or if the -p option was specified, rdist will attempt to run the command:

<rdistd path> -S

If no -p option is specified, or ⟨rdistd path⟩ is a simple filename, rdistd(1) or ⟨rdistd path⟩ must be somewhere in the PATH of the user running rdist on the remote (target) host.

The options are as follows:

-A num

Set the minimum number of free files (inodes) on a filesystem that must exist for rdist to update or install a file.

-a num

Set the minimum amount of free space (in bytes) on a filesystem that must exist for rdist to update or install a file.

-c mini_distfile

Forces rdist to interpret the remaining arguments as a small distfile. The format is:

$ rdist -c name ... [login@]host[:dest]

The equivalent distfile is as follows:

(  name ... ) -> [login@]host
	install	[dest] ;

-D

Enable copious debugging messages.

-d var=value

Define var to have value. This option is used to define or override variable definitions in distfile. value can be the empty string, one name, or a list of names surrounded by parentheses and separated by tabs and/or spaces.

-F

Do not fork any child rdist processes. All clients are updated sequentially.

-f distfile

Set the name of the distfile to distfile. If ‘-’ (dash) is used then read from standard input (stdin).

-L remote_logopts

Set remote logging options. See the section MESSAGE LOGGING for details on the syntax for remote_logopts.

-l local_logopts

Set local logging options. See the section MESSAGE LOGGING for details on the syntax for local_logopts.

-M maxproc

Set the maximum number of simultaneously running child rdist processes to maxproc. The default is 4.

-m host

Limit which machines are to be updated. Multiple -m arguments can be given to limit updates to a subset of the hosts listed in distfile.

-n

Print the commands without executing them. This option is useful for debugging a distfile.

-o distopts

Specify the dist options to enable. distopts is a comma separated list of options which are listed below. The valid values for distopts are:

chknfs

Do not check or update files on the target host that reside on NFS filesystems.

chkreadonly

Enable a check on the target host to see if a file resides on a read-only filesystem. If a file does, then no checking or updating of the file is attempted.

chksym

If the target on the remote host is a symbolic link, but is not on the master host, the remote target will be left a symbolic link. This behavior is generally considered a bug in the original version of rdist, but is present to allow compatibility with older versions.

compare

Binary comparison. Perform a binary comparison and update files if they differ rather than comparing dates and sizes.

defgroup[=groupname]

If the group of a file to be transferred does not exist on the destination host, use the specified group instead. If groupname is not specified, the bin group is used.

defowner[=owner]

If the owner of a file to be transferred does not exist on the destination host, use the specified owner instead. If owner is not specified, the user bin is used.

follow

Follow symbolic links. Copy the file that the link points to rather than the link itself.

history

When savetargets and history are both defined then the target file that is updated is first renamed from file to file.NNN where NNN increases for each generation update. The first generation is 001, and the last is 999. After 999 generations, the counter is reset and stuck to 001, and 001 will get overwritten all the time. This is undesirable behavior, so some other method needs to be devised to clean up or limit the number of generations.

ignlnks

Ignore unresolved links. rdist will normally try to maintain the link structure of files being transferred and warn the user if all the links cannot be found.

nochkgroup

Do not check group ownership of files that already exist. The file ownership is only set when the file is updated.

nochkmode

Do not check file and directory permission modes. The permission mode is only set when the file is updated.

nochkowner

Do not check user ownership of files that already exist. The file ownership is only set when the file is updated.

nodescend

Do not descend into a directory. Normally, rdist will recursively check directories. If this option is enabled, then any files listed in the file list in the distfile that are directories are not recursively scanned. Only the existence, ownership, and mode of the directory are checked.

noexec

Automatically exclude executable binary files in elf(5) format from being checked or updated.

numchkgroup

Use the numeric group ID (GID) to check group ownership instead of the group name.

numchkowner

Use the numeric user ID (UID) to check user ownership instead of the user name.

quiet

Quiet mode. Files that are being modified are normally printed on standard output. This option suppresses that.

remove

Remove extraneous files. If a directory is being updated, any files that exist on the remote host that do not exist in the master directory are removed. This is useful for maintaining truly identical copies of directories.

savetargets

Save files that are updated instead of removing them. Any target file that is updated is first renamed from file to file.OLD.

sparse

Enable checking for sparse files. One of the most common types of sparse files are those produced by dbopen(3). This option adds some additional processing overhead so it should only be enabled for targets likely to contain sparse files.

updateperm

Do not send the whole file when the size and the modification time match. Instead, just update the ownership, group, and permissions as necessary.

verify

Verify that the files are up to date on all the hosts. Any files that are out of date will be displayed but no files will be changed and no mail will be sent.

whole

Whole mode. The whole file name is appended to the destination directory name. Normally, only the last component of a name is used when renaming files. This will preserve the directory structure of the files being copied instead of flattening the directory structure. For example, rdisting a list of files such as /p/dir1/f1 and /p/dir2/f2 to /tmp/dir would create files /tmp/dir/p/dir1/f1 and /tmp/dir/p/dir2/f2 instead of /tmp/dir/dir1/f1 and /tmp/dir/dir2/f2.

younger

Younger mode. Files are normally updated if their mtime and size (see stat(2)) disagree. This option causes rdist not to update files that are younger than the master copy. This can be used to prevent newer copies on other hosts from being replaced. A warning message is printed for files which are newer than the master copy.

-P rsh-path

Set the path to the remote shell command. rsh-path may be a colon separated list of possible pathnames, in which case the first component of the path to exist is used.

-p rdistd-path

Set the path where the rdistd server is searched for on the target host.

-t timeout

Set the timeout period, in seconds, for waiting for responses from the remote rdist server. The default is 900 seconds.

-V

Print version information and exit.

DISTFILES

The distfile contains a sequence of entries that specify the files to be copied, the destination hosts, and what operations to perform to do the updating. Each entry has one of the following formats.

<variable name> = <name list>
[ label: ] <source list> -< <destination list> <command list>
[ label: ] <source list> :: <timestamp file> <command list>

The first format is used for defining variables. The second format is used for distributing files to other hosts. The third format is used for making lists of files that have been changed since some given date. The source list specifies a list of files and/or directories on the local host which are to be used as the master copy for distribution. The destination list is the list of hosts to which these files are to be copied. Each file in the source list is added to a list of changes if the file is out of date on the host which is being updated (second format) or the file is newer than the timestamp file (third format).

Newlines, tabs, and blanks are only used as separators and are otherwise ignored. Comments begin with ‘#’ and end with a newline.

Variables to be expanded begin with ‘$’ followed by one character or a name enclosed in curly braces (see the examples at the end).

Labels are optional. They are used to identify a specific command to execute (for example, allowing an update of a subset of a repository).

The source and destination lists have the following format:

<name>

`(' <zero or more names separated by whitespace> `)'

These simple lists can be modified by using one level of set addition, subtraction, or intersection like this:

If additional modifications are needed (e.g. “all servers and client machines except for the OSF/1 machines”) then the list will have to be explicitly constructed in steps using “temporary” variables.

The shell meta-characters ‘[’, ‘]’, ‘{’, ‘}’, ‘*’, and ‘?’ are recognized and expanded (on the local host only) in the same way as ksh(1). They can be escaped with a backslash. The ‘~’ character is also expanded in the same way as ksh(1) but is expanded separately on the local and destination hosts. When the -o whole option is used with a file name that begins with ‘~’, everything except the home directory is appended to the destination name. File names which do not begin with ‘/’ or ‘~’ use the destination user's home directory as the root directory for the rest of the file name.

The command list consists of zero or more commands of the following format:

The install command is used to copy out-of-date files and/or directories. Each source file is copied to each host in the destination list. Directories are recursively copied in the same way. opt_dest_name is an optional parameter to rename files. If no install command appears in the command list or the destination name is not specified, the source file name is used. Directories in the path name will be created if they do not exist on the remote host. The -o distopts option as specified above has the same semantics as on the command line except distopts only applies to the files in the source list. The login name used on the destination host is the same as the local host unless the destination name is of the format “login@host”.

The notify command is used to mail the list of files updated (and any errors that may have occurred) to the listed names. If no `@' appears in the name, the destination host is appended to the name (e.g. name1@host, name2@host, ...).

The except command is used to update all of the files in the source list except for the files listed in name list. This is usually used to copy everything in a directory except certain files.

The except_pat command is like the except command except that pattern list is a list of basic regular expressions (see re_format(7) for details). If one of the patterns matches some string within a file name, that file will be ignored. Note that since ‘\’ is a quote character, it must be doubled to become part of the regular expression. Variables are expanded in pattern list but not shell file pattern matching characters. To include a ‘$’, it must be escaped with ‘\’.

The special command is used to specify sh(1) commands that are to be executed on the remote host after the file in name list is updated or installed. If the name list is omitted then the shell commands will be executed for every file updated or installed. string starts and ends with ‘"’ and can cross multiple lines in distfile. Multiple commands to the shell should be separated by `;'. Commands are executed in the user's home directory on the host being updated. The special command can be used, for example, to rebuild private databases after a program has been updated. The following environment variables are set for each special command:

The cmdspecial command is similar to the special command, except it is executed only when the entire command is completed instead of after each file is updated. The list of files is placed in the FILES environment variable. Each file name in FILES is separated by a ‘:’ (colon).

If a hostname ends in a ‘+’ (plus sign), then the plus is stripped off and NFS checks are disabled. This is equivalent to disabling the -o chknfs option just for this one host.

MESSAGE LOGGING

rdist uses a collection of predefined message facilities that each contain a list of message types specifying which types of messages to send to that facility. The local client and the remote server each maintain their own copy of what types of messages to log to what facilities.

The -l local_logopts option specifies the logging options to use locally; -L remote_logopts specifies the logging options to pass to the remote server.

Logging options should be of the form:

The valid facility names are:

types should be a comma separated list of message types. Each message type specified enables that message level. This is unlike the syslog(3) system facility which uses an ascending order scheme. The following are the valid types:

Here is a sample command line option:

-l stdout=all:syslog=change,notice:file=/tmp/rdist.log=all

This entry will set local message logging to have all but debug messages sent to standard output, change and notice messages will be sent to syslog(3), and all messages will be written to the file /tmp/rdist.log.

ENVIRONMENT

RSH

Name of the default remote shell program to use. The default is ssh(1).

TMPDIR

Name of the temporary directory to use. The default is /tmp.

FILES

{d,D}istfile

rdist command file.

/etc/Distfile

System-wide rdist command file.

$TMPDIR/rdist*

Temporary file for update lists.

EXAMPLES

The following is an example distfile:

HOSTS = ( matisse root@arpa)

FILES = ( /bin /lib /usr/bin /usr/games
	/usr/include/{*.h,{stand,sys,vax*,pascal,machine}/*.h}
	/usr/lib /usr/man/man? /usr/ucb /usr/local/rdist )

EXLIB = ( Mail.rc aliases aliases.db crontab dshrc
	sendmail.cf sendmail.hf sendmail.st uucp vfont )

${FILES} -> ${HOSTS}
	install -oremove,chknfs ;
	except /usr/lib/${EXLIB} ;
	except /usr/games/lib ;
	special /usr/lib/sendmail "/usr/lib/sendmail -bi" ;

srcs:
/usr/src/bin -> arpa
	except_pat ( \\.o\$ /SCCS\$ ) ;

IMAGEN = (ips dviimp catdvi)

imagen:
/usr/local/${IMAGEN} -> arpa
	install /usr/local/lib ;
	notify ralph ;

sendmail.cf :: stamp.cory
	notify root@cory ;

Using the above distfile:

Update everything that's out of date, making any relevant notifications:

Update files in /usr/src/bin to host “arpa”, except for files with names ending “.o” or “/SCCS”:

Update sendmail.cf if it's older than timestamp file stamp.cory, notifying root@cory if an update has happened:

SEE ALSO

rdistd(1), sh(1), ssh(1), re_format(7), daily(8), syslogd(8)

STANDARDS

The options [-bhiNOqRrsvwxy] are still recognized for backwards compatibility.

CAVEATS

If the basename of a file (the last component in the pathname) is ‘.’, rdist assumes the remote (destination) name is a directory. That is, /tmp/. means that /tmp should be a directory on the remote host.

BUGS

Source files must reside on the local host where rdist is executed.

Variable expansion only works for name lists; there should be a general macro facility.

rdist aborts on files which have a negative mtime (before Jan 1, 1970).

If a hardlinked file is listed more than once in the same target, rdist will report missing links. Only one instance of a link should be listed in each target.

The defowner, defgroup, and updateperm options are extensions to the 6.1.0 protocol and will not work with earlier versions of rdist 6.