NAME
umb —
USB Mobile Broadband Interface Model
(MBIM)
SYNOPSIS
umb* at uhub?
DESCRIPTION
The umb driver provides support for USB
MBIM devices.
MBIM devices establish connections via cellular networks such as GPRS, UMTS, and LTE. They appear as a regular point-to-point network interface, transporting raw IP frames. Once a connection is established, the device will automatically set an IP address and send out a nameserver proposal, which resolvd(8) can act on.
Required configuration parameters like PIN and APN have to be set with ifconfig(8). Once the SIM card has been unlocked with the correct PIN, it will remain in this state until the MBIM device is power-cycled. In case the device is connected to an "always-on" USB port, it may be possible to connect to a provider without entering the PIN again even if the system was rebooted.
HARDWARE
The following devices should work:
- Dell DW5821e
- Ericsson H5321gw and N5321gw
- Fibocom L831-EAU
- Medion Mobile S4222 (MediaTek OEM)
- Quectel EC25
- SIMCom SIM7600
- SIMCom SIM8262E-M2
- Sierra Wireless EM7345
- Sierra Wireless EM7455
- Sierra Wireless EM8805
- Sierra Wireless MC8305
SEE ALSO
intro(4), netintro(4), usb(4), hostname.if(5), ifconfig(8), route(8)
Universal Serial Bus Communications Class Subclass Specification for Mobile Broadband Interface Model, https://www.usb.org/document-library/mobile-broadband-interface-model-v10-errata-1-and-adopters-agreement.
CAVEATS
Devices which fail to provide a conforming MBIM implementation will probably be attached as some other driver, such as umsm(4).