OpenBSD manual page server

Manual Page Search Parameters

UMB(4) Device Drivers Manual UMB(4)

umbUSB Mobile Broadband Interface Model (MBIM)

umb* at uhub?

The umb driver provides support for USB MBIM devices.

MBIM devices establish connections via cellular networks such as GPRS, UMTS, and LTE. They appear as a regular point-to-point network interface, transporting raw IP frames.

Required configuration parameters like PIN and APN have to be set with ifconfig(8). Once the SIM card has been unlocked with the correct PIN, it will remain in this state until the MBIM device is power-cycled. In case the device is connected to an "always-on" USB port, it may be possible to connect to a provider without entering the PIN again even if the system was rebooted.

The following devices should work:

Dell DW5821e
 
Ericsson H5321gw and N5321gw
 
Fibocom L831-EAU
 
Medion Mobile S4222 (MediaTek OEM)
 
Sierra Wireless EM7345
 
Sierra Wireless EM7455
 
Sierra Wireless EM8805
 
Sierra Wireless MC8305
 

intro(4), netintro(4), usb(4), hostname.if(5), ifconfig(8), route(8)

Universal Serial Bus Communications Class Subclass Specification for Mobile Broadband Interface Model, https://www.usb.org/document-library/mobile-broadband-interface-model-v10-errata-1-and-adopters-agreement.

Devices which fail to provide a conforming MBIM implementation will probably be attached as some other driver, such as umsm(4).

March 28, 2021 OpenBSD-6.9