|SOSPLICE(9)||Kernel Developer's Manual||SOSPLICE(9)|
— splice two sockets for zero-copy data
socket *so, int fd,
struct timeval *tv);
socket *so, int
is used to splice together a source and a drain socket. The source socket is
passed as the so argument; the file descriptor of the
drain is passed in fd. If fd is
negative, an existing splicing gets dissolved. If max
is positive, at most that many bytes will get transferred. If
tv is not NULL, a
timeout(9) is scheduled to
dissolve splicing in the case when no data can be transferred for the
specified period of time. Socket splicing can be invoked from userland via
system-call at the
SOL_SOCKET level with the socket
Before connecting both sockets, several checks are executed. See the ERRORS section for possible failures. The connection between both sockets is implemented by setting these additional fields in the struct sosplice *so_sp field in struct socket:
After connecting both sockets,
somove() to transfer the mbufs already in the
source receive buffer to the drain send buffer. Finally the socket buffer
SB_SPLICE is set on both socket buffers, to
indicate that the protocol layer has to call
somove() whenever data or space is available.
transfers data from the source's receive buffer to the drain's send buffer.
It must be called at
so must be a spliced source socket. It may be
necessary to split an mbuf to handle out-of-band data inline or when the
maximum splice length has been reached. If wait is
M_WAIT, splitting mbufs will always succeed. For
M_DONTWAIT the out-of-band property might get lost
or a short splice might happen. In the latter case, less than the given
maximum number of bytes are transferred and userland has to cope with this.
Note that a short splice cannot happen if
was called by
sosplice(). So a second
setsockopt(2) after a
short splice pointing to the same maximum will always succeed.
Before transferring data,
checks both sockets for errors and that the drain socket is connected. If
the drain cannot send anymore, an
EPIPE error is set
on the source socket. The data length to move is limited by the optional
maximum splice length and the space in the drain's send socket buffer. Up to
this amount of data is taken out of the source's receive socket buffer. To
avoid splicing loops created by userland, the number of times an mbuf may be
moved between sockets is limited to 128.
For atomic protocols, either one complete packet is taken out, or
nothing is taken at all if: the packet is bigger than the drain's send
buffer size, in which case the splicing gets aborted with an
EMSGSIZE error; the packet does not fit into the
drain's current send buffer space, in which case it is left in the source's
receive buffer for later processing; or the maximum splice length is located
within a packet, in which case splicing gets dissolved like a short splice.
All address or control mbufs associated with the taken packet are
If the maximum splice length has been reached, an mbuf may get
split for non-atomic protocols. Otherwise an mbuf is either moved completely
to the send buffer or left in the receive buffer for later processing. If
SO_OOBINLINE is set, out-of-band data will get moved as such although this
might not be reliable. The data is sent out to the drain socket via the
protocol function. If that fails and the drain socket cannot send anymore,
EPIPE error is set on the source socket.
For packet oriented protocols
iterates over the next packet queue.
If a maximum splice length was specified and at least
this amount of data has been received from the drain socket, splicing gets
dissolved. In this case, an
EFBIG error is set on
the source socket if the maximum amount of data has been transferred.
Userland can process this error to distinguish the full splice from a short
splice or to react to the completed maximum splice immediately. If an idle
timeout was specified and no data has been transferred for that period of
time, the handler
dissolves splicing and sets an
ETIMEDOUT error on
the source socket.
is called to dissolve the socket splicing if the source socket cannot
receive anymore and its receive buffer is empty; or if the drain socket
cannot send anymore; or if the maximum has been reached; or if an error
occurred; or if the idle timeout has fired.
If the socket buffer flag
SB_SPLICE is set, the functions
somove() to trigger the transfer when new
data or buffer space is available. While socket splicing is active, any
read(2) from the source socket
will block and the wakeup will not be delivered to the file descriptor. A
read event or a socket error is signaled to userland after dissolving.
sosplice() returns 0 on success and
otherwise the error number.
somove() returns 0 if
socket splicing has been finished and 1 if it continues.
sosplice() will succeed unless:
PR_SPLICEflag set. Only TCP and UDP socket splicing is supported.
Socket splicing for TCP first appeared in OpenBSD 4.9; support for UDP was added in OpenBSD 5.3.
The idea for socket splicing originally came from Markus Friedl <firstname.lastname@example.org>, and Alexander Bluhm <email@example.com> implemented it. Mike Belopuhov <firstname.lastname@example.org> added the timeout feature.
|August 15, 2018||OpenBSD-6.4|