Meinberg Funkuhren USB5131 timedelta
umbg* at uhub?
umbg driver provides support for the
Meinberg Funkuhren USB5131, a time signal station receiver for the German
umbg implements a timedelta sensor
and the delta (in nanoseconds) between the received time information and the
local time can be accessed through the
The quality of the timedelta is reported as the sensor status:
- No valid time information has been received yet.
- The time information is valid and the timedelta is safe to use for applications like ntpd(8).
- The time information is still valid, but no new time information has been decoded for at least twelve hours due to a reception or parity error. The timedelta should be used with care.
- No valid time information has been received for more than twelve hours since the sensor state degraded from OK to WARN. This is an indication that hardware should be checked to see if it is still functional.
A second sensor provides the relative signal quality as a percentage. The status of this sensor is used to report the status of the device itself:
- The clock is synchronized.
- The device's clock is free running on the local oscillator. This is not an error and can happen due to the nature of the signal transmission using longwave radio.
- Hardware failure, e.g. communication with the device failed.
intro(4), usb(4), ntpd(8), sysctl(8)
umbg driver first appeared in
umbg driver was written by
Marc Balmer ⟨email@example.com⟩.