[OpenBSD]

Manual Page Search Parameters

EPIC(4) Device Drivers Manual EPIC(4)

NAME

epicSMC 83C170 (EPIC/100) 10/100 Ethernet device

SYNOPSIS

epic* at pci?
acphy* at mii?
lxtphy* at mii?
qsphy* at mii?

DESCRIPTION

The epic interface provides access to the 10Mb/s and 100Mb/s Ethernet networks via the SMC EPIC chipset. This driver provides support for the SMC EtherPower II 10/100 Ethernet cards.
The epic supports several media types, which are selected via the ifconfig(8) command. The supported media types are:
 
 
media autoselect
Attempt to autoselect the media type (default)
 
 
media 100baseFX mediaopt full-duplex
Use 100baseFX (fiber), full duplex
 
 
media 100baseFX [mediaopt half-duplex]
Use 100baseFX (fiber), half duplex
 
 
media 100baseTX mediaopt full-duplex
Use 100baseTX, full duplex
 
 
media 100baseTX [mediaopt half-duplex]
Use 100baseTX, half duplex
 
 
media 100baseTX mediaopt loopback
Put the interface into loopback mode
 
 
media 10baseT mediaopt full-duplex
Use 10baseT, full duplex
 
 
media 10baseT [mediaopt half-duplex]
Use 10baseT, half duplex
 
 
media 10baseT mediaopt loopback
Put the interface into loopback mode

SEE ALSO

acphy(4), arp(4), ifmedia(4), inet(4), intro(4), lxtphy(4), netintro(4), pci(4), qsphy(4), hostname.if(5), ifconfig(8)

HISTORY

The epic device driver first appeared in NetBSD 1.4. OpenBSD support was added in OpenBSD 3.8.

AUTHORS

The epic driver was written by Jason R. Thorpe <thorpej@wasabisystems.com> and ported to OpenBSD by Brad Smith <brad@openbsd.org>.
July 16, 2013 OpenBSD-current