[OpenBSD]

Manual Page Search Parameters

LII(4) Device Drivers Manual LII(4)

NAME

liiAttansic L2 10/100 Ethernet device

SYNOPSIS

lii* at pci?
atphy* at mii?

DESCRIPTION

The lii driver provides support for Ethernet interfaces based on the Attansic L2 Ethernet chipset.
The lii driver supports the following media types:
 
 
autoselect
Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to the appropriate hostname.if(5) file.
 
 
10baseT
Set 10Mbps operation. The ifconfig(8) mediaopt option can also be used to select either full-duplex or half-duplex modes.
 
 
100baseTX
Set 100Mbps (Fast Ethernet) operation. The ifconfig(8) mediaopt option can also be used to select either full-duplex or half-duplex modes.
The lii driver supports the following media options:
 
 
full-duplex
Force full duplex operation.
 
 
half-duplex
Force half duplex operation.
For more information on configuring this device, see ifconfig(8). To view a list of media types and options supported by the card, try ifconfig <device> media. For example, ifconfig lii0 media.

SEE ALSO

arp(4), atphy(4), ifmedia(4), intro(4), netintro(4), pci(4), hostname.if(5), ifconfig(8)

HISTORY

The lii device driver first appeared in OpenBSD 4.3.

AUTHORS

The lii driver was written by Quentin Garnier.
January 27, 2011 OpenBSD-current