OpenBSD manual page server

Manual Page Search Parameters
EEPROM(8) System Manager's Manual EEPROM(8)

eeprom — display or modify contents of the OpenPROM

eeprom [-pv] [-f device] [field[=value] ...]

eeprom provides an interface for displaying and changing the contents of the OpenPROM. Without any arguments, eeprom will list all of the known fields and their corresponding values. When given the name of a specific field, eeprom will display that value or set it if the field name is followed by ‘=’ and a value. Only the superuser may modify the contents of the OpenPROM.

The options are as follows:

-
Commands are taken from stdin and displayed on stdout.
device
Use device instead of the default /dev/openprom.
Display the tree derived from the OpenPROM and exit.
Be verbose when setting a value.

Since the OpenPROM is designed such that the field names are arbitrary, explaining them here is dubious. Below are field names and values that one is likely to see. NOTE: this list may be incomplete or incorrect due to differences between revisions of the OpenPROM.

sunmon-compat?
If true, the old EEPROM-style interface will be used while in the monitor, rather than the OpenPROM-style interface.
selftest-#megs
A 32-bit integer specifying the number of megabytes of memory to test upon power-up.
oem-logo
A 64bitx64bit bitmap in Sun Iconedit format. To set the bitmap, give the pathname of the file containing the image. NOTE: this property is not yet supported.
oem-logo?
If true, enables the use of the bitmap stored in oem-logo rather than the default Sun logo.
oem-banner
A string to use at power-up, rather than the default Sun banner.
oem-banner?
If true, enables the use of the banner stored in oem-banner rather than the default Sun banner.
ttya-mode
A string of five comma separated fields in the format “9600,8,n,1,-”. The first field is the baud rate. The second field is the number of data bits. The third field is the parity; acceptable values for parity are “n” (none), “e” (even), “o” (odd), “m” (mark), and “s” (space). The fourth field is the number of stop bits. The fifth field is the “handshake” field; acceptable values are “-” (none), “h” (RTS/CTS), and “s” (XON/XOFF).
ttya-rts-dtr-off
If true, the system will ignore RTS/DTR.
ttya-ignore-cd
If true, the system will ignore carrier detect.
ttyb-mode
Similar to ttya-mode, but for ttyb.
ttyb-rts-dtr-off
Similar to ttya-rts-dtr-off, but for ttyb.
ttyb-ignore-cd
Similar to ttya-ignore-cd, but for ttyb.
sbus-probe-list
Four digits in the format “0123” specifying which order to probe the SBus at power-up. It is unlikely that this value should ever be changed.
screen-#columns
An 8-bit integer specifying the number of columns on the console.
screen-#rows
An 8-bit integer specifying the number of rows on the console.
boot-device
Space separated list of device aliases or device paths to boot from, in the given order.
boot-file
File to boot. The empty string lets the second-stage boot program choose the default.
auto-boot?
If true, the system will boot automatically at power-up.
watchdog-reboot?
If true, the system will reboot upon reset. Otherwise, the system will fall into the monitor.
input-device
One of the strings “keyboard”, “ttya”, or “ttyb” specifying the default console input device.
output-device
One of the strings “screen”, “ttya”, or “ttyb” specifying the default console output device.
keyboard-click?
If true, the keys click annoyingly.
network-boot-arguments
Comma separated list of arguments for booting over RARP or BOOTP/DHCP and TFTP.
sd-targets
A string in the format “31204567” describing the translation of physical to logical target.
st-targets
Similar to sd-targets, but for tapes. The default translation is “45670123”.
scsi-initiator-id
The SCSI ID of the on-board SCSI controller.
hardware-revision
A 7-character string describing a date, such as “25May95”.
last-hardware-update
Similar to hardware-revision, describing when the CPU was last updated.
diag-switch?
If true, the system will boot and run in diagnostic mode.
local-mac-address?
When set to , all Ethernet devices will use the same system default MAC address. When , Ethernet devices which have a unique MAC address will use it rather than the system default MAC address. This option only really affects FCode-based Ethernet devices. On Sparc64, all on-board devices, as well as plug-in hme(4) boards, will respect this setting; other hardware will not.

/dev/openprom
the OpenPROM device

openprom(4)

The fields and their values are not necessarily well defined on systems with an OpenPROM. Your mileage may vary.

There are a few fields known to exist in some revisions of the OpenPROM that are not yet supported. Most notable are those relating to password protection of the OpenPROM.

The date parser isn't very intelligent.

November 9, 2022 OpenBSD-current