[OpenBSD]

Manual Page Search Parameters

TSEC(4) Device Drivers Manual (socppc) TSEC(4)

tsec
three-speed 10/100/Gigabit Ethernet device

tsec0 at obio? addr 0x24000 ivec 32
tsec1 at obio? addr 0x25000 ivec 35
rgephy* at mii?
gentbi* at mii?

The tsec driver provides support for the three-speed Ethernet controller (TSEC) found on the Freescale MPC8349E processor family. It uses an external PHY or an internal 10-bit interface.

The tsec driver supports several media types, which are selected via the ifconfig(8) command. The supported media types are:

media autoselect
Attempt to autoselect the media type (default)
media 1000baseT mediaopt full-duplex
Use 1000baseT on copper, full duplex
media 1000baseT [mediaopt half-duplex]
Use 1000baseT on copper, half duplex
media 1000baseSX mediaopt full-duplex
Use 1000baseSX on fiber, full duplex
media 1000baseSX [mediaopt half-duplex]
Use 1000baseSX on fiber, half duplex
media 100baseTX mediaopt full-duplex
Use 100baseTX, full duplex
media 100baseTX [mediaopt half-duplex]
Use 100baseTX, half duplex
media 10baseT mediaopt full-duplex
Use 10baseT, full duplex
media 10baseT [mediaopt half-duplex]
Use 10baseT, half duplex

arp(4), gentbi(4), ifmedia(4), inet(4), intro(4), netintro(4), rgephy(4), hostname.if(5), ifconfig(8)

OpenBSD support for tsec first appeared in OpenBSD 4.4.

The tsec driver was written by Mark Kettenis <kettenis@openbsd.org>.
July 16, 2013 OpenBSD-current