OpenBSD manual page server

Manual Page Search Parameters

SF(4) Device Drivers Manual SF(4)

sfAdaptec AIC-6915 Starfire PCI 10/100 Ethernet device

sf* at pci?
sqphy* at mii?

The sf driver provides support for Adaptec Duralink Fast Ethernet adapters based on the Adaptec AIC-6915 "Starfire" chipset. This includes the following:

The AIC-6915 is a bus master controller with an MII interface. It supports high and low priority transmit and receive queues, TCP/IP checksum offload, multiple DMA descriptor formats and both polling and producer/consumer DMA models. The AIC-6915 receive filtering options include a 16 entry perfect filter, a 512-bit hash table for multicast addresses, a 512-bit hash table for priority address matching and VLAN filtering. An external MII-compliant transceiver is required for media interfacing.

Multiport adapters consist of several AIC-6915 controllers connected via a PCI to PCI bridge. Each controller is treated as a separate interface by the sf driver.

The sf driver supports the following media types:

autoselect
Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to the hostname.if(5) file.
10baseT
Set 10Mbps operation. The mediaopt option can also be used to select either full-duplex or half-duplex modes.
100baseTX
Set 100Mbps (Fast Ethernet) operation. The mediaopt option can also be used to select either full-duplex or half-duplex modes.

The sf driver supports the following media options:

full-duplex
Force full duplex operation.
half-duplex
Force half duplex operation.

For more information on configuring this device, see ifconfig(8).

arp(4), ifmedia(4), intro(4), netintro(4), pci(4), sqphy(4), hostname.if(5), ifconfig(8)

The Adaptec AIC-6915 Programmer's Manual, https://download.adaptec.com/pdfs/user_guides/aic6915_pg.pdf.

The sf device driver first appeared in OpenBSD 2.7.

The sf driver was written by Jason R. Thorpe <thorpej@NetBSD.org> and ported to OpenBSD by Martin Reindl <martin@openbsd.org>.

The sf driver does not support the IPv4/TCP/UDP checksum function of the AIC-6915.

The sf driver does not support the VLAN function of the AIC-6915.

February 18, 2022 OpenBSD-7.2