|MEM(4)||Device Drivers Manual (hppa)||MEM(4)|
memory files and memory controller
mem* at mainbus0 flags 0x0000
mem driver controls and restricts
access to the systems memory by the hardware buses and the processor.
It also provides an interface to userland through the special files /dev/mem and /dev/kmem. Physical memory is accessed through /dev/mem, while kernel virtual memory is accessed through /dev/kmem. Access to kernel virtual addresses not currently mapped to memory will fail. On hppa, the physical memory range is always contiguous and starts at address 0; kernel virtual memory begins at address 0 as well.
On some systems featuring a “Viper” memory
controller, OpenBSD may not configure bus
arbitration correctly, causing the boot process to freeze during either
cpu(4) device probe.
In this case, a different initialization strategy can be achieved by setting flags to 0x0001 (see boot_config(8) for details).
|January 12, 2018||OpenBSD-7.0|