IBM SATA/SCSI ServeRAID
ips* at pci?
ips driver provides support for IBM
ServeRAID controllers, including:
- ServeRAID 3H/3HB/3L
- ServeRAID 4H/4L/4Lx/4M/4Mx
- ServeRAID 5i/5i II
- ServeRAID 6i/6M
- ServeRAID 7k/7M/7t
Although the controllers are actual RAID controllers, the driver makes them look just like SCSI controllers. All RAID configuration is done through the bootable IBM ServeRAID Support CD; a CD image is freely available at the IBM website.
The management interface is provided through the bio(4) device or one of the daughter sd(4) devices as implemented in the bioctl(8) utility. Logical disk status is exposed under the hw.sensors sysctl(8) and can be monitored using sensorsd(8).
bio(4), intro(4), pci(4), scsi(4), sd(4), bioctl(8), sensorsd(8), sysctl(8)
ips driver first appeared in
ips driver was written by
bioctl(8) limitations the
associates all unused and hot spare drives with the first volume but the
drives can be used for rebuilding any degraded volume.