NAME
osiop —
Symbios/NCR 53C710 SCSI
driver
SYNOPSIS
osiop* at gsc? irq 9 (hppa)
DESCRIPTION
The osiop driver provides support for the
Symbios/NCR 53C710 SCSI controller chip.
The Symbios/NCR 53C700 SCSI controller is handled by the oosiop(4) driver, while the Symbios/NCR 53C8xx PCI SCSI host adapters are handled by the siop(4) driver.
CONFIGURATION
The osiop driver supports the following
flags
for use in config(8) files:
- bits 0-7:
- disable disconnect/reselect for the corresponding SCSI target
- bits 8-15:
- disable synchronous negotiation for SCSI target
- bits 16:
- disable DMA interrupts
"Target" is synonymous with SCSI ID number.
Note that SCSI tape drives should be allowed to perform disconnect/reselect or performance will suffer.
SEE ALSO
cd(4), ch(4), intro(4), oosiop(4), scsi(4), sd(4), siop(4), st(4), uk(4)
HISTORY
The osiop driver first appeared in
NetBSD 1.6.
The original NCR 53C710 driver appeared in NetBSD 1.0 amiga port, and Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> modified the driver and made it machine-independent.