OpenBSD manual page server

Manual Page Search Parameters

BIO_S_CONNECT(3) Library Functions Manual BIO_S_CONNECT(3)

BIO_s_connect, BIO_new_connect, BIO_set_conn_hostname, BIO_set_conn_port, BIO_set_conn_ip, BIO_set_conn_int_port, BIO_get_conn_hostname, BIO_get_conn_port, BIO_get_conn_ip, BIO_get_conn_int_port, BIO_set_nbio, BIO_do_connectconnect BIO

#include <openssl/bio.h>

const BIO_METHOD *
BIO_s_connect(void);

BIO *
BIO_new_connect(const char *name);

long
BIO_set_conn_hostname(BIO *b, char *name);

long
BIO_set_conn_port(BIO *b, char *port);

long
BIO_set_conn_ip(BIO *b, char *ip);

long
BIO_set_conn_int_port(BIO *b, char *port);

char *
BIO_get_conn_hostname(BIO *b);

char *
BIO_get_conn_port(BIO *b);

char *
BIO_get_conn_ip(BIO *b, dummy);

long
BIO_get_conn_int_port(BIO *b, int port);

long
BIO_set_nbio(BIO *b, long n);

int
BIO_do_connect(BIO *b);

() returns the connect BIO method. This is a wrapper around the platform's TCP/IP socket connection routines.

Using connect BIOs, TCP/IP connections can be made and data transferred using only BIO routines. In this way any platform specific operations are hidden by the BIO abstraction.

Read and write operations on a connect BIO will perform I/O on the underlying connection. If no connection is established and the port and hostname (see below) is set up properly, then a connection is established first.

Connect BIOs support BIO_puts(3) but not BIO_gets(3).

If the close flag is set on a connect BIO, then any active connection is shutdown and the socket closed when the BIO is freed.

Calling BIO_reset(3) on a connect BIO will close any active connection and reset the BIO into a state where it can connect to the same host again.

BIO_get_fd(3) places the underlying socket in c if it is not NULL and also returns the socket. If c is not NULL it should be of type int *.

() uses the string name to set the hostname. The hostname can be an IP address. The hostname can also include the port in the form hostname:port. It is also acceptable to use the forms hostname/any/other/path or hostname:port/any/other/path.

() sets the port to port. port is looked up as a service using getaddrinfo(3)

() sets the IP address to ip using binary form i.e. four bytes specifying the IP address in big-endian form.

() sets the port using port. port should be of type int *.

() returns the hostname of the connect BIO or NULL if the BIO is initialized but no hostname is set. This return value is an internal pointer which should not be modified.

() returns the port as a string. This return value is an internal pointer which should not be modified.

() returns the IP address in binary form.

() returns the port as an int.

() sets the non-blocking I/O flag to n. If n is zero then blocking I/O is set. If n is 1 then non-blocking I/O is set. Blocking I/O is the default. The call to BIO_set_nbio() should be made before the connection is established because non-blocking I/O is set during the connect process.

() combines BIO_new(3) and BIO_set_conn_hostname() into a single call. It creates a new connect BIO with name.

() attempts to connect the supplied BIO. It returns 1 if the connection was established successfully. A zero or negative value is returned if the connection could not be established. The call BIO_should_retry(3) should be used for non-blocking connect BIOs to determine if the call should be retried.

If blocking I/O is set then a non-positive return value from any I/O call is caused by an error condition, although a zero return will normally mean that the connection was closed.

If the port name is supplied as part of the host name then this will override any value set with (). This may be undesirable if the application does not wish to allow connection to arbitrary ports. This can be avoided by checking for the presence of the ‘:’ character in the passed hostname and either indicating an error or truncating the string at that point.

The values returned by (), BIO_get_conn_port(), BIO_get_conn_ip(), and BIO_get_conn_int_port() are updated when a connection attempt is made. Before any connection attempt the values returned are those set by the application itself.

Applications do not have to call () but may wish to do so to separate the connection process from other I/O processing.

If non-blocking I/O is set, then retries will be requested as appropriate.

In addition to BIO_should_read(3) and BIO_should_write(3) it is also possible for BIO_should_io_special(3) to be true during the initial connection process with the reason BIO_RR_CONNECT. If this is returned, it is an indication that a connection attempt would block. The application should then take appropriate action to wait until the underlying socket has connected and retry the call.

(), BIO_set_conn_port(), BIO_set_conn_ip(), BIO_set_conn_int_port(), BIO_get_conn_hostname(), BIO_get_conn_port(), BIO_get_conn_ip(), BIO_get_conn_int_port(), BIO_set_nbio(), and BIO_do_connect() are macros.

BIO_s_connect() returns the connect BIO method.

BIO_get_fd(3) returns the socket or -1 if the BIO has not been initialized.

BIO_set_conn_hostname(), BIO_set_conn_port(), BIO_set_conn_ip(), and BIO_set_conn_int_port() always return 1.

BIO_get_conn_hostname() returns the connected hostname or NULL if none is set.

BIO_get_conn_port() returns a string representing the connected port or NULL if not set.

BIO_get_conn_ip() returns a pointer to the connected IP address in binary form or all zeros if not set.

BIO_get_conn_int_port() returns the connected port or 0 if none was set.

BIO_set_nbio() always returns 1.

BIO_do_connect() returns 1 if the connection was successfully established and 0 or -1 if the connection failed.

This example connects to a webserver on the local host and attempts to retrieve a page and copy the result to standard output.

BIO *cbio, *out;
int len;
char tmpbuf[1024];

ERR_load_crypto_strings();
cbio = BIO_new_connect("localhost:http");
out = BIO_new_fp(stdout, BIO_NOCLOSE);
if (BIO_do_connect(cbio) <= 0) {
	fprintf(stderr, "Error connecting to server\n");
	ERR_print_errors_fp(stderr);
	/* whatever ... */
}
BIO_puts(cbio, "GET / HTTP/1.0\n\n");
for(;;) {
	len = BIO_read(cbio, tmpbuf, 1024);
	if (len <= 0)
		break;
	BIO_write(out, tmpbuf, len);
}
BIO_free(cbio);
BIO_free(out);

BIO_new(3)

BIO_s_connect(), BIO_new_connect(), BIO_set_nbio(), and BIO_do_connect() first appeared in SSLeay 0.8.0. BIO_set_conn_hostname(), BIO_set_conn_port(), BIO_set_conn_ip(), BIO_set_conn_int_port(), BIO_get_conn_hostname(), BIO_get_conn_port(), BIO_get_conn_ip(), and BIO_get_conn_int_port() first appeared in SSLeay 0.9.0. All these functions have been available since OpenBSD 2.4.

May 12, 2018 OpenBSD-6.6