NAME
vge
—
VIA Velocity 10/100/Gigabit Ethernet
device
SYNOPSIS
vge* at pci?
ciphy* at mii?
ipgphy* at mii?
DESCRIPTION
The vge
driver provides support for
various NICs and embedded Ethernet interfaces based on the VIA Networking
Technologies VT6120, VT6122, VT6130 and VT6132 Gigabit Ethernet controller
chips, including the following:
- ZyXEL GN650-T 64-bit PCI Gigabit Ethernet NIC (ZX1701)
- ZyXEL GN670-T 32-bit PCI Gigabit Ethernet NIC (ZX1702)
The VT6120/VT6122 is a 33/66MHz 64-bit PCI device which combines a tri-speed MAC with an integrated 10/100/1000 copper PHY. (Some older cards use an external PHY.) The VT6130/VT6132 is the PCI Express version. The MAC supports IPv4 transmit/receive IP/TCP/UDP checksum offload, VLAN tag insertion and stripping, a 64-entry CAM filter and a 64-entry VLAN filter, 64-bit multicast hash filter, 4 separate transmit DMA queues, flow control and jumbo frames (not on VT6130/VT6132). The Velocity family has a 16K receive FIFO and 48K transmit FIFO.
The vge
driver takes advantage of the IPv4
transmit/receive IP/TCP/UDP checksum offload, VLAN tag insertion and
stripping, and the CAM filter support. The CAM filter is used for multicast
address filtering to provide 64 perfect multicast address filter support. If
it is necessary for the interface to join more than 64 multicast groups, the
driver will switch over to using the hash filter.
The vge
driver supports the following
media types:
autoselect
- Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to the appropriate hostname.if(5) file.
10baseT/UTP
- Set 10Mbps operation. The
ifconfig(8)
mediaopt
option can also be used to select eitherfull-duplex
orhalf-duplex
modes. 100baseTX
- Set 100Mbps (Fast Ethernet) operation. The
ifconfig(8)
mediaopt
option can also be used to select eitherfull-duplex
orhalf-duplex
modes. 1000baseT
- Set 1000baseT operation over twisted pair. Both
full-duplex
andhalf-duplex
modes are supported.
The vge
driver supports the following
media options:
full-duplex
- Force full duplex operation.
half-duplex
- Force half duplex operation.
For more information on configuring this device, see ifconfig(8).
SEE ALSO
arp(4), ciphy(4), ifmedia(4), intro(4), ipgphy(4), netintro(4), pci(4), hostname.if(5), ifconfig(8)
HISTORY
The vge
device driver first appeared in
OpenBSD 3.7.
AUTHORS
The vge
driver was written by
Bill Paul
<wpaul@windriver.com>
and ported to OpenBSD by Peter
Valchev
<pvalchev@openbsd.org>.