xrdb - X server resource database utility
[-option ...] [ filename
is used to get or set the contents of the RESOURCE_MANAGER property
on the root window of screen 0, or the SCREEN_RESOURCES property on the root
window of any or all screens, or everything combined. You would normally run
this program from your X startup file.
Most X clients use the RESOURCE_MANAGER and SCREEN_RESOURCES properties to get
user preferences about color, fonts, and so on for applications. Having this
information in the server (where it is available to all clients) instead of on
disk, solves the problem in previous versions of X that required you to
files on every machine that you might use. It also
allows for dynamic changing of defaults without editing files.
The RESOURCE_MANAGER property is used for resources that apply to all screens of
the display. The SCREEN_RESOURCES property on each screen specifies additional
(or overriding) resources to be used for that screen. (When there is only one
screen, SCREEN_RESOURCES is normally not used, all resources are just placed
in the RESOURCE_MANAGER property.)
The file specified by filename
(or the contents from standard input if -
or no filename is given) is optionally passed through the C preprocessor with
the following symbols defined, based on the capabilities of the server being
- the hostname portion of the display to which you are connected.
- the SERVERHOST hostname string turned into a legal identifier. For
example, "my-dpy.lcs.mit.edu" becomes
- the same as SERVERHOST.
- the number of the display on the server host.
- the name of the host on which xrdb is running.
- the CLIENTHOST hostname string turned into a legal identifier. For
example, "expo.lcs.mit.edu" becomes CLNT_expo_lcs_mit_edu.
- the vendor release number for the server. The interpretation of this
number will vary depending on VENDOR.
- the X protocol minor version supported by this server (currently 0).
- the X protocol major version supported by this server (should always be
- a string literal specifying the vendor of the server.
- the VENDOR name string turned into a legal identifier. For example,
"MIT X Consortium" becomes VNDR_MIT_X_Consortium.
- A symbol is defined for each protocol extension supported by the server.
Each extension string name is turned into a legal identifier. For example,
"X3D-PEX" becomes EXT_X3D_PEX.
- the total number of screens.
- the number of the current screen (from zero).
- the number of significant bits in an RGB color specification. This is the
log base 2 of the number of distinct shades of each primary that the
hardware can generate. Note that it usually is not related to PLANES.
- one of StaticGray, GrayScale, StaticColor, PseudoColor, TrueColor,
DirectColor. This is the visual class of the root window.
- the visual class of the root window in a form you can #ifdef on.
The value is the numeric id of the visual.
- defined only if CLASS is one of StaticColor, PseudoColor, TrueColor, or
- A symbol is defined for each visual supported for the screen. The symbol
includes the class of the visual and its depth; the value is the numeric
id of the visual. (If more than one visual has the same class and depth,
the numeric id of the first one reported by the server is used.)
- the height of the root window in pixels.
- the width of the root window in pixels.
- the number of bit planes (the depth) of the root window.
- the x resolution of the screen in pixels per meter.
- the y resolution of the screen in pixels per meter.
, and EXT_name
identifiers are formed by changing all characters other than letters and
digits into underscores (_).
Lines that begin with an exclamation mark (!) are ignored and may be used as
Note that since xrdb
can read from standard input, it can be used to the
change the contents of properties directly from a terminal or from a shell
program accepts the following options:
- This option (or any unsupported option) will cause a brief description of
the allowable options and parameters to be printed.
- This option will cause the xrdb version to be printed and the program to
exit without performing any other operations.
- -display display
- This option specifies the X server to be used; see X(7). It also
specifies the screen to use for the -screen option, and it
specifies the screen from which preprocessor symbols are derived for the
- This option indicates that operation should be performed on the
screen-independent resource property (RESOURCE_MANAGER), as well as the
screen-specific property (SCREEN_RESOURCES) on every screen of the
display. For example, when used in conjunction with -query, the
contents of all properties are output. For -load, -override
and -merge, the input file is processed once for each screen. The
resources which occur in common in the output for every screen are
collected, and these are applied as the screen-independent resources. The
remaining resources are applied for each individual per-screen property.
This the default mode of operation.
- This option indicates that the operation should only be performed on the
screen-independent RESOURCE_MANAGER property.
- This option indicates that the operation should only be performed on the
SCREEN_RESOURCES property of the default screen of the display.
- This option indicates that the operation should be performed on the
SCREEN_RESOURCES property of each screen of the display. For -load,
-override and -merge, the input file is processed for each
- This option indicates that changes to the specified properties (when used
with -load, -override or -merge) or to the resource
file (when used with -edit) should be shown on the standard output,
but should not be performed.
- This option indicates that warning about duplicate entries should not be
- -cpp filename
- This option specifies the pathname of the C preprocessor program to be
used. Although xrdb was designed to use CPP, any program that acts
as a filter and accepts the -D, -I, and -U options may be used.
- This option indicates that xrdb should not run the input file
through a preprocessor before loading it into properties.
- This option is passed to the C preprocessor if used. It prevents it from
predefining any system specific macros.
- This option indicates that the symbols that are defined for the
preprocessor should be printed onto the standard output.
- This option indicates that the current contents of the specified
properties should be printed onto the standard output. Note that since
preprocessor commands in the input resource file are part of the input
file, not part of the property, they won't appear in the output from this
option. The -edit option can be used to merge the contents of
properties back into the input resource file without damaging preprocessor
- This option indicates that the input should be loaded as the new value of
the specified properties, replacing whatever was there (i.e. the old
contents are removed). This is the default action.
- This option indicates that the input should be added to, instead of
replacing, the current contents of the specified properties. New entries
override previous entries.
- This option indicates that the input should be merged and
lexicographically sorted with, instead of replacing, the current contents
of the specified properties.
- This option indicates that the specified properties should be removed from
- This option indicates that the server should be instructed not to reset if
xrdb is the first client. This should never be necessary under
normal conditions, since xdm and xinit always act as the
- -edit filename
- This option indicates that the contents of the specified properties should
be edited into the given file, replacing any values already listed there.
This allows you to put changes that you have made to your defaults back
into your resource file, preserving any comments or preprocessor
- -backup string
- This option specifies a suffix to be appended to the filename used with
-edit to generate a backup file.
- This option is passed through to the preprocessor and is used to define
symbols for use with conditionals such as #ifdef.
- This option is passed through to the preprocessor and is used to remove
any definitions of this symbol.
- This option is passed through to the preprocessor and is used to specify a
directory to search for files that are referenced with
does not load any files on its own, but many desktop environments
use xrdb to load ~/.Xresources
files on session startup to initialize
the resource database, as a generalized replacement for ~/.Xdefaults
X(7), appres(1), listres(1), Xlib Resource Manager documentation, Xt resource
- to figure out which display to use.
The default for no arguments should be to query, not to overwrite, so that it is
consistent with other programs.
Bob Scheifler, Phil Karlton, rewritten from the original by Jim Gettys