OpenBSD manual page server

Manual Page Search Parameters

MGX(4) Device Drivers Manual (sparc64) MGX(4)

mgxSMS MGX and MGXPlus accelerated 8/24-bit color frame buffers

mgx* at sbus?
wsdisplay* at mgx?

The Southland Media Systems (now Quantum 3D) MGX and MGXPlus are SBus color frame buffers, with graphics acceleration capabilities.

The mgx driver interfaces the frame buffer with the wscons(4) console framework. It does not provide direct device driver entry points but makes its functions available via the internal wsdisplay(4) interface.

The MGX and MGXPlus frame buffers will adapt their resolution to the monitor they are connected to. However, when not connected to a Sun monitor, the device will default to the cgthree(4)-compatible 1152x900 resolution, with a refresh rate of 66Hz. A different resolution can be forced using the set of DIP switches (sometimes covered by metal foil) located near the SBus connector on the board itself.

The DIP switch settings are as follows:

1024x768 77Hz
1280x1024 76Hz
1152x900 66Hz
1152x900 76Hz
1152x900 77Hz
1152x900 66Hz cgthree compatible
1152x900 66Hz cgsix compatible
1280x1024 67Hz
probed probed factory default

All other combinations are unsupported and may damage the hardware.

intro(4), sbus(4), wscons(4), wsdisplay(4)

This driver does not support mode switching at the moment, and drives the card in PROM-compatible, 8 bit, mode only.

December 3, 2011 OpenBSD-6.1