[OpenBSD]

Manual Page Search Parameters

CZ(4) Device Drivers Manual CZ(4)

NAME

czCyclades-Z series multi-port serial adapter device

SYNOPSIS

cz* at pci?

DESCRIPTION

The cz device driver supports the Cyclades-Z series of multi-port serial adapters. The Cyclades-Z is an intelligent serial controller comprising:
The MIPS CPU runs firmware provided by the device driver. Communication with the MIPS is performed by modifying data structures located in board local RAM or host RAM.
The Cyclades-Z comes in three basic flavors:
The Cyclades-Z has several features to improve performance under high serial I/O load:

FILES

/dev/ttyZ??
dial-in (normal) TTY device
/dev/cuaZ??
dial-out TTY device

SEE ALSO

intro(4), pci(4), termios(4), tty(4)

HISTORY

The cz driver first appeared in OpenBSD 3.0.

AUTHORS

The cz driver was written by Jason R. Thorpe <thorpej@zembu.com> and Bill Studenmund <wrstuden@zembu.com> of Zembu Labs, Inc.

BUGS

The cz driver does not currently implement communication via host RAM. While this may improve performance by reducing the number of PCI memory space read/write cycles, it is not straightforward to implement with the current bus_dma(9) API.
Interrupt mode has not been tested.
There is no support for reading or writing the EEPROM connected to the PLX PCI bus controller.
July 16, 2013 OpenBSD-6.1