OpenBSD manual page server

Manual Page Search Parameters

MANDOC(1) General Commands Manual MANDOC(1)

mandocformat and display UNIX manuals

mandoc [-acfhkl] [-I os=name] [-K encoding] [-mformat] [-O option] [-T output] [-W level] [file ...]

The mandoc utility formats UNIX manual pages for display.

By default, mandoc reads mdoc(7) or man(7) text from stdin, implying -mandoc, and produces -T locale output.

The options are as follows:

If the standard output is a terminal device and -c is not specified, use more(1) to paginate the output, just like man(1) would.
Copy the formatted manual pages to the standard output without using more(1) to paginate them. This is the default. It can be specified to override -a.
A synonym for whatis(1). This overrides any earlier -k and -l options.
os=name
Override the default operating system name for the mdoc(7) ‘Os’ and for the man(7) ‘TH’ macro.
Display only the SYNOPSIS lines. Implies -c.
encoding
Specify the input encoding. The supported encoding arguments are us-ascii, iso-8859-1, and utf-8. If not specified, autodetection uses the first match:
if the first three bytes of the input file are the UTF-8 byte order mark (BOM, 0xefbbbf)
encoding
if the first or second line of the input file matches the mode line format

.\" -*- [...;] coding: encoding; -*-
if the first non-ASCII byte in the file introduces a valid UTF-8 sequence
otherwise
A synonym for apropos(1). This overrides any earlier -f and -l options.
A synonym for -a. Also reverts any earlier -f and -k options.
format
Input format. See Input Formats for available formats. Defaults to -mandoc.
option
Comma-separated output options.
output
Output format. See Output Formats for available formats. Defaults to -T locale.
level
Specify the minimum message level to be reported on the standard error output and to affect the exit status. The level can be warning, error, or unsupp; all is an alias for warning. By default, mandoc is silent. See EXIT STATUS and DIAGNOSTICS for details.

The special option -W stop tells mandoc to exit after parsing a file that causes warnings or errors of at least the requested level. No formatted output will be produced from that file. If both a level and stop are requested, they can be joined with a comma, for example -W error,stop.

file
Read input from zero or more files. If unspecified, reads from stdin. If multiple files are specified, mandoc will halt with the first failed parse.

In -f and -k mode, mandoc also supports the options -CMmOSsw described in the apropos(1) manual.

The mandoc utility accepts mdoc(7) and man(7) input with -mdoc and -man, respectively. The mdoc(7) format is recommended; man(7) should only be used for legacy manuals.

A third option, -mandoc, which is also the default, determines encoding on-the-fly: if the first non-comment macro is ‘Dd’ or ‘Dt’, the mdoc(7) parser is used; otherwise, the man(7) parser is used.

If multiple files are specified with -mandoc, each has its file-type determined this way. If multiple files are specified and -mdoc or -man is specified, then this format is used exclusively.

The mandoc utility accepts the following -T arguments, which correspond to output modes:

ascii
Produce 7-bit ASCII output. See ASCII Output.
html
Produce HTML5, CSS1, and MathML output. See HTML Output.
lint
Parse only: produce no output. Implies -W warning.
locale
Encode output using the current locale. This is the default. See Locale Output.
man
Produce man(7) format output. See Man Output.
pdf
Produce PDF output. See PDF Output.
ps
Produce PostScript output. See PostScript Output.
tree
Produce an indented parse tree. See Syntax tree output.
utf8
Encode output in the UTF-8 multi-byte format. See UTF-8 Output.
xhtml
This is a synonym for -T html.

If multiple input files are specified, these will be processed by the corresponding filter in-order.

Output produced by -T ascii is rendered in standard 7-bit ASCII documented in ascii(7).

Font styles are applied by using back-spaced encoding such that an underlined character ‘c’ is rendered as ‘_\[bs]c’, where ‘\[bs]’ is the back-space character number 8. Emboldened characters are rendered as ‘c\[bs]c’.

The special characters documented in mandoc_char(7) are rendered best-effort in an ASCII equivalent.

Output width is limited to 78 visible columns unless literal input lines exceed this limit.

The following -O arguments are accepted:

=indent
The left margin for normal text is set to indent blank characters instead of the default of five for mdoc(7) and seven for man(7). Increasing this is not recommended; it may result in degraded formatting, for example overfull lines or ugly line breaks.
=width
The output width is set to width, which will normalise to ≥58.

Output produced by -T html conforms to HTML5 using optional self-closing tags. Default styles use only CSS1. Equations rendered from eqn(7) blocks use MathML.

The mandoc.css file documents style-sheet classes available for customising output. If a style-sheet is not specified with -O style, -T html defaults to simple output (via an embedded style-sheet) readable in any graphical or text-based web browser.

Special characters are rendered in decimal-encoded UTF-8.

The following -O arguments are accepted:

Omit the <!DOCTYPE> declaration and the <html>, <head>, and <body> elements and only emit the subtree below the <body> element. The style argument will be ignored. This is useful when embedding manual content within existing documents.
=fmt
The string fmt, for example, ../src/%I.html, is used as a template for linked header files (usually via the ‘In’ macro). Instances of ‘%I’ are replaced with the include filename. The default is not to present a hyperlink.
=fmt
The string fmt, for example, ../html%S/%N.%S.html, is used as a template for linked manuals (usually via the ‘Xr’ macro). Instances of ‘%N’ and ‘%S’ are replaced with the linked manual's name and section, respectively. If no section is included, section 1 is assumed. The default is not to present a hyperlink.
=style.css
The file style.css is used for an external style-sheet. This must be a valid absolute or relative URI.

Locale-depending output encoding is triggered with -T locale. This is the default.

This option is not available on all systems: systems without locale support, or those whose internal representation is not natively UCS-4, will fall back to -T ascii. See ASCII Output for font style specification and available command-line arguments.

Translate input format into man(7) output format. This is useful for distributing manual sources to legacy systems lacking mdoc(7) formatters.

If mdoc(7) is passed as input, it is translated into man(7). If the input format is man(7), the input is copied to the output, expanding any roff(7) ‘so’ requests. The parser is also run, and as usual, the -W level controls which DIAGNOSTICS are displayed before copying the input to the output.

PDF-1.1 output may be generated by -T pdf. See PostScript Output for -O arguments and defaults.

PostScript "Adobe-3.0" Level-2 pages may be generated by -T ps. Output pages default to letter sized and are rendered in the Times font family, 11-point. Margins are calculated as 1/9 the page length and width. Line-height is 1.4m.

Special characters are rendered as in ASCII Output.

The following -O arguments are accepted:

=name
The paper size name may be one of a3, a4, a5, legal, or letter. You may also manually specify dimensions as NNxNN, width by height in millimetres. If an unknown value is encountered, letter is used.

Use -T utf8 to force a UTF-8 locale. See Locale Output for details and options.

Use -T tree to show a human readable representation of the syntax tree. It is useful for debugging the source code of manual pages. The exact format is subject to change, so don't write parsers for it. Each output line shows one syntax tree node. Child nodes are indented with respect to their parent node. The columns are:

  1. For macro nodes, the macro name; for text and tbl(7) nodes, the content. There is a special format for eqn(7) nodes.
  2. Node type (text, elem, block, head, body, body-end, tail, tbl, eqn).
  3. Flags:
    • An opening parenthesis if the node is an opening delimiter.
    • An asterisk if the node starts a new input line.
    • The input line number (starting at one).
    • A colon.
    • The input column number (starting at one).
    • A closing parenthesis if the node is a closing delimiter.
    • A full stop if the node ends a sentence.

Any non-empty value of the environment variable MANPAGER will be used instead of the standard pagination program, more(1).
Specifies the pagination program to use when MANPAGER is not defined. If neither PAGER nor MANPAGER is defined, more(1) -s will be used.

The mandoc utility exits with one of the following values, controlled by the message level associated with the -W option:

0
No warnings or errors occurred, or those that did were ignored because they were lower than the requested level.
2
At least one warning occurred, but no error, and -W warning was specified.
3
At least one parsing error occurred, but no unsupported feature was encountered, and -W error or -W warning was specified.
4
At least one unsupported feature was encountered, and -W unsupp, -W error or -W warning was specified.
5
Invalid command line arguments were specified. No input files have been read.
6
An operating system error occurred, for example exhaustion of memory, file descriptors, or process table entries. Such errors cause mandoc to exit at once, possibly in the middle of parsing or formatting a file.

Note that selecting -T lint output mode implies -W warning.

To page manuals to the terminal:

$ mandoc -W all,stop mandoc.1 2>&1 | less
$ mandoc mandoc.1 mdoc.3 mdoc.7 | less

To produce HTML manuals with mandoc.css as the style-sheet:

$ mandoc -T html -O style=mandoc.css mdoc.7 > mdoc.7.html

To check over a large set of manuals:

$ mandoc -T lint `find /usr/src -name \*\.[1-9]`

To produce a series of PostScript manuals for A4 paper:

$ mandoc -T ps -O paper=a4 mdoc.7 man.7 > manuals.ps

Convert a modern mdoc(7) manual to the older man(7) format, for use on systems lacking an mdoc(7) parser:

$ mandoc -T man foo.mdoc > foo.man

Messages displayed by mandoc follow this format:

mandoc: file:line:column: level: message: macro args

Line and column numbers start at 1. Both are omitted for messages referring to an input file as a whole. Macro names and arguments are omitted where meaningless. Fatal messages about invalid command line arguments or operating system errors, for example when memory is exhausted, may also omit the file and level fields.

Message levels have the following meanings:

An input file uses unsupported low-level roff(7) features. The output may be incomplete and/or misformatted, so using GNU troff instead of mandoc to process the file may be preferable.
An input file contains invalid syntax that cannot be safely interpreted. By discarding part of the input or inserting missing tokens, the parser is able to continue, and the error does not prevent generation of formatted output, but typically, preparing that output involves information loss, broken document structure or unintended formatting, no matter whether mandoc or GNU troff is used. In many cases, the output of mandoc and GNU troff is identical, but in some, mandoc is more resilient than GNU troff with respect to malformed input.

Non-existent or unreadable input files are also reported on the error level. In that case, the parser cannot even be started and no output is produced from those input files.

An input file uses obsolete, discouraged or non-portable syntax. All the same, the meaning of the input is unambiguous and a correct rendering can be produced. Documents causing warnings may render poorly when using other formatting tools instead of mandoc.

Messages of the warning, error, and unsupp levels except those about non-existent or unreadable input files are hidden unless their level, or a lower level, is requested using a -W option or -T lint output mode.

(mdoc) A Dt macro has no arguments, or there is no Dt macro before the first non-prologue macro.
(man) There is no TH macro, or it has no arguments.
(mdoc, man) The title is still used as given in the Dt or TH macro.
(mdoc, man) A Dt or TH macro lacks the mandatory section argument.
(mdoc) The section number in a Dt line is invalid, but still used.
(mdoc, man) The document was parsed as mdoc(7) and it has no Dd macro, or the Dd macro has no arguments or only empty arguments; or the document was parsed as man(7) and it has no TH macro, or the TH macro has less than three arguments or its third argument is empty.
(mdoc, man) The date given in a Dd or TH macro does not follow the conventional format.
(mdoc) The default or current system is not shown in this case.
(mdoc) One of the prologue macros occurs more than once. The last instance overrides all previous ones.
(mdoc) A Dd or Os macro occurs after some non-prologue macro, but still takes effect.
(mdoc) The Dt macro appears after the first non-prologue macro. Traditional formatters cannot handle this because they write the page header before parsing the document body. Even though this technical restriction does not apply to mandoc, traditional semantics is preserved. The late macro is discarded including its arguments.
(mdoc) The prologue macros are not given in the conventional order Dd, Dt, Os. All three macros are used even when given in another order.

(roff) Including files only works when the parser program runs with the correct current working directory.
(mdoc, man) The document body contains neither text nor macros. An empty document is shown, consisting only of a header and a footer line.
(mdoc, man) Some macros or text precede the first Sh or SH section header. The offending macros and text are parsed and added to the top level of the syntax tree, outside any section block.
(mdoc) The argument of the first Sh macro is not ‘NAME’. This may confuse makewhatis(8) and apropos(1).
NAME section without name
(mdoc) The NAME section does not contain any Nm child macro.
NAME section without description
(mdoc) The NAME section lacks the mandatory Nd child macro.
(mdoc) The NAME section does contain an Nd child macro, but other content follows it.
(mdoc) The NAME section contains plain text or macros other than Nm and Nd.
(mdoc) The Nd macro lacks the required argument. The title line of the manual will end after the dash.
(mdoc) A standard section occurs after another section it usually precedes. All section titles are used as given, and the order of sections is not changed.
(mdoc) The same standard section title occurs more than once.
(mdoc) A standard section header occurs in a section of the manual where it normally isn't useful.
(mdoc) In the SEE ALSO section, an Xr macro with a lower section number follows one with a higher number, or two Xr macros referring to the same section are out of alphabetical order.
(mdoc) In the SEE ALSO section, punctuation between two Xr macros differs from a single comma, or there is trailing punctuation after the last Xr macro.
AUTHORS section without An macro
(mdoc) An AUTHORS sections contains no An macros, or only empty ones. Probably, there are author names lacking markup.
(mdoc) See the mdoc(7) manual for replacements.
(mdoc) The name of a macro that is not callable appears on a macro line. It is printed verbatim. If the intention is to call it, move it to its own input line; otherwise, escape it by prepending ‘\&’.
In mdoc(7) documents, this happens
  • at the beginning and end of sections and subsections
  • right before non-compact lists and displays
  • at the end of items in non-column, non-compact lists
  • and for multiple consecutive paragraph macros.
In man(7) documents, it happens
  • for empty P, PP, and LP macros
  • for IP macros having neither head nor body arguments
  • for br or sp right after SH or SS
(mdoc) A list item in a Bl list contains a trailing paragraph macro. The paragraph macro is moved after the end of the list.
(mdoc) An input line begins with an Ns macro. The macro is ignored.
(mdoc) If two blocks intersect, one should completely contain the other. Otherwise, rendered output is likely to look strange in any output format, and rendering in SGML-based output formats is likely to be outright wrong because such languages do not support badly nested blocks at all. Typical examples of badly nested blocks are "Ao Bo Ac Bc" and "Ao Bq Ac". In these examples, Ac breaks Bo and Bq, respectively.
(mdoc) A Bd, D1, or Dl display occurs nested inside another Bd display. This works with mandoc, but fails with most other implementations.
(mdoc) A Bl list block contains text or macros before the first It macro. The offending children are moved before the beginning of the list.
(man) A fi request occurs even though the document is still in fill mode, or already switched back to fill mode. It has no effect.
(man) An nf request occurs even though the document already switched to no-fill mode and did not switch back to fill mode yet. It has no effect.
(man) While parsing the next-line scope of the previous macro, another macro is found that prematurely terminates the previous one. The previous, interrupted macro is deleted from the parse tree.
(roff, eqn) The macro name is missing from a macro definition request, or an eqn(7) control statement or operation keyword lacks its required argument.
(roff) A conditional request is only useful if any of the following follows it on the same logical input line:
  • The ‘\{’ keyword to open a multi-line scope.
  • A request or macro or some text, resulting in a single-line scope.
  • The immediate end of the logical line without any intervening whitespace, resulting in next-line scope.
Here, a conditional request is followed by trailing whitespace only, and there is no other content on its logical input line. Note that it doesn't matter whether the logical input line is split across multiple physical input lines using ‘\’ line continuation characters. This is one of the rare cases where trailing whitespace is syntactically significant. The conditional request controls a scope containing whitespace only, so it is unlikely to have a significant effect, except that it may control a following el clause.
(mdoc) The indicated macro has no arguments and hence no effect.
(mdoc, man) A Bd, Bk, Bl, D1, Dl, RS, or UR block contains nothing in its body and will produce no output.
(mdoc) The required width is missing after Bd or Bl -offset or -width.
(mdoc) The Bd macro is invoked without the required display type.
(mdoc) In a Bl macro, at least one other argument precedes the type argument. The mandoc utility copes with any argument order, but some other mdoc(7) implementations do not.
(mdoc) Every Bl macro having the -tag argument requires -width, too.
(mdoc) The Ex -std macro is called without an argument before Nm has first been called with an argument.
(mdoc) The Fo macro is called without an argument. No function name is printed.
(mdoc) In a Bl -diag, -hang, -inset, -ohang, or -tag list, an It macro lacks the required argument. The item head is left empty.
(mdoc) In a Bl -bullet, -dash, -enum, or -hyphen list, an It block is empty. An empty list item is shown.
(mdoc) A Bf macro has no argument. It switches to the default font.
(mdoc) The Bf argument is invalid. The default font is used instead.
(mdoc) A Pf macro has no argument, or only one argument and no macro follows on the same input line. This defeats its purpose; in particular, spacing is not suppressed before the text or macros following on the next input line.
(mdoc) An Rs macro is immediately followed by an Re macro on the next input line. Such an empty block does not produce any output.
(mdoc) An Ex or Rv macro lacks the required -std argument. The mandoc utility assumes -std even when it is not specified, but other implementations may not.
(man) The OP macro is invoked without any argument. An empty pair of square brackets is shown.
(man) The UR macro is invoked without any argument. An empty pair of angle brackets is shown.
(eqn) A diacritic mark or a binary operator is found, but there is nothing to the left of it. An empty box is inserted.
(roff) Macro arguments can be enclosed in double quote characters such that space characters and macro names contained in the quoted argument need not be escaped. The closing quote of the last argument of a macro can be omitted. However, omitting it is not recommended because it makes the code harder to read.
(mdoc) A Bd or Bl macro has more than one -compact, more than one -offset, or more than one -width argument. All but the last instances of these arguments are ignored.
(mdoc) An An macro has more than one -split or -nosplit argument. All but the first of these arguments are ignored.
(mdoc) A Bd macro has more than one type argument; the first one is used.
(mdoc) A Bl macro has more than one type argument; the first one is used.
(mdoc) A Bl -column, -diag, -ohang, -inset, or -item list has a -width argument. That has no effect.
In a line of a Bl -column list, the number of tabs or Ta macros is less than the number expected from the list header line or exceeds the expected number by more than one. Missing cells remain empty, and all cells exceeding the number of columns are joined into one single cell.
(mdoc) An At macro has an invalid argument. It is used verbatim, with "AT&T UNIX " prefixed to it.
(mdoc) An argument of an Fa or Fn macro contains a comma; it should probably be split into two arguments.
(mdoc) The first argument of an Fc or Fn macro contains an opening or closing parenthesis; that's probably wrong, parentheses are added automatically.
(mdoc) An Rs block contains plain text or non-% macros. The bogus content is left in the syntax tree. Formatting may be poor.
(mdoc) An Sm macro has an argument other than on or off. The invalid argument is moved out of the macro, which leaves the macro empty, causing it to toggle the spacing mode.
(man, tbl) A roff(7) ft request or a tbl(7) f layout modifier has an unknown font argument.
(roff) A tr request contains an odd number of characters. The last character is mapped to the blank character.
(mdoc) The meaning of blank input lines is only well-defined in non-fill mode: In fill mode, line breaks of text input lines are not supposed to be significant. However, for compatibility with groff, blank lines in fill mode are replaced with sp requests.
(mdoc, man) The meaning of tab characters is only well-defined in non-fill mode: In fill mode, whitespace is not supposed to be significant on text input lines. As an implementation dependent choice, tab characters on text lines are passed through to the formatters in any case. Given that the text before the tab character will be filled, it is hard to predict which tab stop position the tab will advance to.
(mdoc, man, roff) Whitespace at the end of input lines is almost never semantically significant — but in the odd case where it might be, it is extremely confusing when reviewing and maintaining documents.
(roff) Comment lines start with a dot, a backslash, and a double-quote character. The mandoc utility treats the line as a comment line even without the backslash, but leaving out the backslash might not be portable.
(roff) An escape sequence has an invalid opening argument delimiter, lacks the closing argument delimiter, or the argument has too few characters. If the argument is incomplete, \* and \n expand to an empty string, \B to the digit ‘0’, and \w to the length of the incomplete argument. All other invalid escape sequences are ignored.
(roff) If a string is used without being defined before, its value is implicitly set to the empty string. However, defining strings explicitly before use keeps the code more readable.
(tbl) The first cell in a table layout line is a horizontal span (‘s’). Data provided for this cell is ignored, and nothing is printed in the cell.
(tbl) The first line of a table layout specification requests a vertical span (‘^’). Data provided for this cell is ignored, and nothing is printed in the cell.
(tbl) A table layout specification contains more than two consecutive vertical bars. A double bar is printed, all additional bars are discarded.
(tbl) The table options line contains a character other than a letter, blank, or comma where the beginning of an option name is expected. The character is ignored.
(tbl) The table options line contains a string of letters that does not match any known option name. The word is ignored.
(tbl) A table option that requires an argument is not followed by an opening parenthesis, or the opening parenthesis is immediately followed by a closing parenthesis. The option is ignored.
(tbl) A table option argument contains an invalid number of characters. Both the option and the argument are ignored.
(tbl) A table layout specification is completely empty, specifying zero lines and zero columns. As a fallback, a single left-justified column is used.
(tbl) A table layout specification contains a character that can neither be interpreted as a layout key character nor as a layout modifier, or a modifier precedes the first key. The invalid character is discarded.
(tbl) A table layout specification contains an opening parenthesis, but no matching closing parenthesis. The rest of the input line, starting from the parenthesis, has no effect.
(tbl) A table does not contain any data cells. It will probably produce no output.
(tbl) A table cell is marked as a horizontal span (‘s’) or vertical span (‘^’) in the table layout, but it contains data. The data is ignored.
(tbl) A data line contains more cells than the corresponding layout line. The data in the extra cells is ignored.
(tbl) A data block is opened with T{, but never closed with a matching T}. The remaining data lines of the table are all put into one cell, and any remaining cells stay empty.
(roff) Explicit recursion limits are implemented for the following features, in order to prevent infinite loops:
  • expansion of nested escape sequences including expansion of strings and number registers,
  • expansion of nested user-defined macros,
  • and so file inclusion.
When a limit is hit, the output is incorrect, typically losing some content, but the parser can continue.
(mdoc, man, roff) The input file contains a byte that is not a printable ascii(7) character. The message mentions the character number. The offending byte is replaced with a question mark (‘?’). Consider editing the input file to replace the byte with an ASCII transliteration of the intended character.
(mdoc, man, roff) The first identifier on a request or macro line is neither recognized as a roff(7) request, nor as a user-defined macro, nor, respectively, as an mdoc(7) or man(7) macro. It may be mistyped or unsupported. The request or macro is discarded including its arguments.
(roff) An input file attempted to run a shell command or to read or write an external file. Such attempts are denied for security reasons.
(mdoc, eqn) An It macro occurs outside any Bl list, or an eqn(7) above delimiter occurs outside any pile. It is discarded including its arguments.
(mdoc) A Ta macro occurs outside any Bl -column block. It is discarded including its arguments.
(mdoc, man, eqn, tbl, roff) Various syntax elements can only be used to explicitly close blocks that have previously been opened. An mdoc(7) block closing macro, a man(7) RE or UE macro, an eqn(7) right delimiter or closing brace, or the end of an equation, table, or roff(7) conditional request is encountered but no matching block is open. The offending request or macro is discarded.
(man) The RE macro is invoked with an argument, but less than the specified number of RS blocks is open. The RE macro is discarded.
(mdoc, tbl) Various mdoc(7) macros as well as tables require explicit closing by dedicated macros. A block that doesn't support bad nesting ends before all of its children are properly closed. The open child nodes are closed implicitly.
(mdoc, man, eqn, tbl, roff) At the end of the document, an explicit mdoc(7) block, a man(7) next-line scope or RS or UR block, an equation, table, or roff(7) conditional or ignore block is still open. The open block is closed implicitly.
(roff) Macro, string and register identifiers consist of printable, non-whitespace ASCII characters. Escape sequences and characters and strings expressed in terms of them cannot form part of a name. The first argument of an am, as, de, ds, nr, or rr request, or any argument of an rm request, or the name of a request or user defined macro being called, is terminated by an escape sequence. In the cases of as, ds, and nr, the request has no effect at all. In the cases of am, de, rr, and rm, what was parsed up to this point is used as the arguments to the request, and the rest of the input line is discarded including the escape sequence. When parsing for a request or a user-defined macro name to be called, only the escape sequence is discarded. The characters preceding it are used as the request or macro name, the characters following it are used as the arguments to the request or macro.
(mdoc) For security reasons, the Bd macro does not support the -file argument. By requesting the inclusion of a sensitive file, a malicious document might otherwise trick a privileged user into inadvertently displaying the file on the screen, revealing the file content to bystanders. The argument is ignored including the file name following it.
(mdoc) A Bd block macro does not have any arguments. The block is discarded, and the block content is displayed in whatever mode was active before the block.
(mdoc) A Bl macro fails to specify the list type.
(mdoc) The first call to Nm lacks the required argument.
(mdoc) The Os macro is called without arguments, and the uname(3) system call failed. As a workaround, mandoc can be compiled with -DOSNAME="\"string\"".
(mdoc) An St macro has an unknown argument and is discarded.
(roff, eqn) An it request or an eqn(7) size or gsize statement has a non-numeric or negative argument or no argument at all. The invalid request or statement is ignored.
(roff) For security reasons, mandoc allows so file inclusion requests only with relative paths and only without ascending to any parent directory. By requesting the inclusion of a sensitive file, a malicious document might otherwise trick a privileged user into inadvertently displaying the file on the screen, revealing the file content to bystanders. mandoc only shows the path as it appears behind so.
(roff) Servicing a so request requires reading an external file, but the file could not be opened. mandoc only shows the path as it appears behind so.
(mdoc, man, eqn, roff) An mdoc(7) Bt, Ed, Ef, Ek, El, Lp, Pp, Re, Rs, or Ud macro, an It macro in a list that don't support item heads, a man(7) LP, P, or PP macro, an eqn(7) EQ or EN macro, or a roff(7) br, fi, or nf request or ‘..’ block closing request is invoked with at least one argument. All arguments are ignored.
(mdoc, man, roff) A macro or request is invoked with too many arguments:
  • , PD, RS, UR, ft, or sp with more than one argument
  • with another argument after -split or -nosplit
  • with more than one argument or with a non-integer argument
  • or a request of the de family with more than two arguments
  • with more than three arguments
  • with more than five arguments
  • , Bk, or Bl with invalid arguments
The excess arguments are ignored.

(mdoc, man) Currently, mandoc cannot handle input files larger than its arbitrary size limit of 2^31 bytes (2 Gigabytes). Since useful manuals are always small, this is not a problem in practice. Parsing is aborted as soon as the condition is detected.
(roff) An ASCII control character supported by other roff(7) implementations but not by mandoc was found in an input file. It is replaced by a question mark.
(roff) An input file contains a roff(7) request supported by GNU troff or Heirloom troff but not by mandoc, and it is likely that this will cause information loss or considerable misformatting.
(eqn, tbl) The options line of a table defines equation delimiters. Any equation source code contained in the table will be printed unformatted.
(tbl) A table layout specification contains an ‘m’ modifier. The modifier is discarded.
(tbl, mdoc, man) A table contains an invocation of an mdoc(7) or man(7) macro or of an undefined macro. The macro is ignored, and its arguments are handled as if they were a text line.

apropos(1), man(1), eqn(7), man(7), mandoc_char(7), mdoc(7), roff(7), tbl(7)

The mandoc utility was written by Kristaps Dzonsons <kristaps@bsd.lv> and is maintained by Ingo Schwarze <schwarze@openbsd.org>.

In -T html, the maximum size of an element attribute is determined by BUFSIZ, which is usually 1024 bytes. Be aware of this when setting long link formats such as -O style=really/long/link.

November 5, 2015 OpenBSD-5.9