NAME
sed
—
stream editor
SYNOPSIS
sed |
[-aEnru ] command
[file ...] |
sed |
[-aEnru ] [-e
command] [-f
command_file] [file ...] |
DESCRIPTION
The sed
utility reads the specified files,
or the standard input if no files are specified, modifying the input as
specified by a list of commands. The input is then written to the standard
output.
A single command may be specified as the first argument to
sed
. Multiple commands may be specified separated by
newlines or semicolons, or by using the -e
or
-f
options. All commands are applied to the input in
the order they are specified regardless of their origin.
The options are as follows:
-a
- The files listed as parameters for the
w
function or flag are created (or truncated) before any processing begins, by default. The-a
option causessed
to delay opening each file until a command containing the relatedw
function or flag is applied to a line of input. -E
- Interpret regular expressions using POSIX extended regular expression syntax. The default behaviour is to use POSIX basic regular expression syntax.
-e
command- Append the editing commands specified by the command argument to the list of commands.
-f
command_file- Append the editing commands found in the file command_file to the list of commands. The editing commands should each be listed on a separate line.
-r
- An alias for
-E
, for compatibility with GNU sed. -n
- By default, each line of input is echoed to the standard output after all
of the commands have been applied to it. The
-n
option suppresses this behavior. -u
- Force output to be line buffered, printing each line as it becomes available. By default, output is line buffered when standard output is a terminal and block buffered otherwise. See setbuf(3) for a more detailed explanation.
The form of a sed
command is as
follows:
[address[,address]]function[arguments]
Whitespace may be inserted before the first address and the function portions of the command.
Normally, sed
cyclically
copies a line of input, not including its terminating newline character,
into a pattern
space, (unless there is something left after a
D
function), applies all of the commands with
addresses that select that pattern space, copies the pattern space to the
standard output, appending a newline, and deletes the pattern space.
Some of the functions use a hold space to save all or part of the pattern space for subsequent retrieval.
SED ADDRESSES
An address is not required, but if specified must be a number
(that counts input lines cumulatively across input files), a dollar
character (‘$
’) that addresses the
last line of input, or a context address (which consists of a regular
expression preceded and followed by a delimiter).
A command line with no addresses selects every pattern space.
A command line with one address selects all of the pattern spaces that match the address.
A command line with two addresses selects the inclusive range from
the first pattern space that matches the first address through the next
pattern space that matches the second. (If the second address is a number
less than or equal to the line number first selected, only that line is
selected.) Starting at the first line following the selected range,
sed
starts looking again for the first address.
Editing commands can be applied to non-selected pattern spaces by
use of the exclamation character (‘!
’)
function.
SED REGULAR EXPRESSIONS
By default, sed
regular expressions are
basic regular expressions (BREs). Extended regular expressions are supported
using the -E
and -r
options.
See re_format(7) for more information on regular expressions. In
addition, sed
has the following two additions to
BREs:
- In a context address, any character other than a backslash
(‘
\
’) or newline character may be used to delimit the regular expression. The opening delimiter should be preceded by a backslash unless it is a slash. Putting a backslash character before the delimiting character causes the character to be treated literally. For example, in the context address \xabc\xdefx, the RE delimiter is an ‘x’ and the second ‘x’ stands for itself, so that the regular expression is “abcxdef”. - The escape sequence \n matches a newline character embedded in the pattern space. You can't, however, use a literal newline character in an address or in the substitute command.
One special feature of sed
regular
expressions is that they can default to the last regular expression used. If
a regular expression is empty, i.e., just the delimiter characters are
specified, the last regular expression encountered is used instead. The last
regular expression is defined as the last regular expression used as part of
an address or substitute command, and at run-time, not compile-time. For
example, the command “/abc/s//XXX/” will substitute
“XXX” for the pattern “abc”.
SED FUNCTIONS
In the following list of commands, the maximum number of permissible addresses for each command is indicated by [0addr], [1addr], or [2addr], representing zero, one, or two addresses.
The argument text consists of one or more lines. To embed a newline in the text, precede it with a backslash. Other backslashes in text are deleted and the following character taken literally.
The r
and w
functions, as well as the w
flag to the
s
function, take an optional
file parameter, which should be separated from the
function or flag by whitespace. Files are created (or their contents
truncated) before any input processing begins.
The b
, r
,
s
, t
,
w
, y
, and
:
functions all accept additional arguments. The
synopses below indicate which arguments have to be separated from the
function letters by whitespace characters.
Functions can be combined to form a
function list, a
list of sed
functions each followed by a newline, as
follows:
{ function function ... function }
The braces can be preceded and followed by whitespace. The functions can be preceded by whitespace as well.
Functions and function lists may be preceded by an exclamation mark, in which case they are applied only to lines that are not selected by the addresses.
- [2addr] function-list
- Execute function-list only when the pattern space is selected.
- [1 addr]
a
\
text -
Write text to standard output immediately before each attempt to read a line of input, whether by executing the
N
function or by beginning a new cycle. - [2addr]
b
[label] - Branch to the
:
function with the specified label. If the label is not specified, branch to the end of the script. - [2addr]
c
\
text -
Delete the pattern space. With 0 or 1 address or at the end of a 2-address range, text is written to the standard output.
- [2addr]
d
- Delete the pattern space and start the next cycle.
- [2addr]
D
- Delete the initial segment of the pattern space through the first newline character and start the next cycle.
- [2addr]
g
- Replace the contents of the pattern space with the contents of the hold space.
- [2addr]
G
- Append a newline character followed by the contents of the hold space to the pattern space.
- [2addr]
h
- Replace the contents of the hold space with the contents of the pattern space.
- [2addr]
H
- Append a newline character followed by the contents of the pattern space to the hold space.
- [1addr]
i
\
text -
Write text to the standard output.
- [2addr]
l
- (The letter ell.) Write the pattern space to the standard output in a
visually unambiguous form. This form is as follows:
- backslash
- \\
- alert
- \a
- backspace
- \b
- form-feed
- \f
- carriage-return
- \r
- tab
- \t
- vertical tab
- \v
Non-printable characters are written as three-digit octal numbers (with a preceding backslash) for each byte in the character (most significant byte first). Long lines are folded, with the point of folding indicated by displaying a backslash followed by a newline. The end of each line is marked with a ‘
$
’. - [2addr]
n
- Write the pattern space to the standard output if the default output has not been suppressed, and replace the pattern space with the next line of input.
- [2addr]
N
- Append the next line of input to the pattern space, using an embedded newline character to separate the appended material from the original contents. Note that the current line number changes.
- [2addr]
p
- Write the pattern space to standard output.
- [2addr]
P
- Write the pattern space, up to the first newline character, to the standard output.
- [1addr]
q
- Branch to the end of the script and quit without starting a new cycle.
- [1addr]
r
file - Copy the contents of file to the standard output immediately before the next attempt to read a line of input. If file cannot be read for any reason, it is silently ignored and no error condition is set.
- [2addr]
s
/RE/replacement/flags - Substitute the replacement string for the first
instance of the regular expression RE in the pattern
space. Any character other than backslash or newline can be used instead
of a slash to delimit the regular expression and the replacement. Within
the regular expression and the replacement, the regular expression
delimiter itself can be used as a literal character if it is preceded by a
backslash.
An ampersand (‘
&
’) appearing in the replacement is replaced by the string matching the regular expression. The special meaning of ‘&
’ in this context can be suppressed by preceding it by a backslash. The string ‘\#
’, where ‘#
’ is a digit, is replaced by the text matched by the corresponding backreference expression (see re_format(7)).A line can be split by substituting a newline character into it. To specify a newline character in the replacement string, precede it with a backslash.
The value of flags in the substitute function is zero or more of the following:
0
...9
- Make the substitution only for the N'th occurrence of the regular expression in the pattern space.
g
- Make the substitution for all non-overlapping matches of the regular expression, not just the first one.
p
- Write the pattern space to standard output if a replacement was made. If the replacement string is identical to that which it replaces, it is still considered to have been a replacement.
w
file- Append the pattern space to file if a replacement was made. If the replacement string is identical to that which it replaces, it is still considered to have been a replacement.
- [2addr]
t
[label] - Branch to the
:
function bearing the label if any substitutions have been made since the most recent reading of an input line or execution of at
function. If no label is specified, branch to the end of the script. - [2addr]
w
file - Append the pattern space to the file.
- [2addr]
x
- Swap the contents of the pattern and hold spaces.
- [2addr]
y
/string1/string2/ - Replace all occurrences of characters in string1 in the pattern space with the corresponding characters from string2. Any character other than a backslash or newline can be used instead of a slash to delimit the strings. Within string1 and string2, a backslash followed by any character other than a newline is that literal character, and a backslash followed by an ‘n’ is replaced by a newline character.
- [0addr]
:
label - This function does nothing; it bears a label to
which the
b
andt
commands may branch. - [1addr]
=
- Write the line number to the standard output followed by a newline character.
- [0addr]
- Empty lines are ignored.
- [0addr]
#
- The ‘
#
’ and the remainder of the line are ignored (treated as a comment), with the single exception that if the first two characters in the file are ‘#n
’, the default output is suppressed. This is the same as specifying the-n
option on the command line.
EXIT STATUS
The sed
utility exits 0 on success,
and >0 if an error occurs.
EXAMPLES
The following simulates the
cat(1) -s
command, squeezing excess empty
lines from standard input:
$ sed -n ' # Write non-empty lines. /./ { p d } # Write a single empty line, then look for more empty lines. /^$/ p # Get the next line, discard the held <newline> (empty line), # and look for more empty lines. :Empty /^$/ { N s/.// b Empty } # Write the non-empty line before going back to search # for the first in a set of empty lines. p '
SEE ALSO
STANDARDS
The sed
utility is compliant with the
IEEE Std 1003.1-2008 (“POSIX.1”)
specification.
The flags [-aEru
] are extensions to that
specification.
The use of newlines to separate multiple commands on the command
line is non-portable; the use of newlines to separate multiple commands
within a command file (-f
command_file) is portable.
HISTORY
A sed
command appeared in
Version 7 AT&T UNIX.
CAVEATS
The use of semicolons to separate multiple commands is not
permitted for the following commands: a
,
b
, c
,
i
, r
,
t
, w
,
:
, and #
.