OpenBSD manual page server

Comments

Text following an escaped double-quote ‘\"’, whether in a request, macro, or text line, is ignored to the end of the line. A request line beginning with a control character and comment escape ‘.\"’ is also ignored. Furthermore, request lines with only a control character and optional trailing whitespace are stripped from input.

Examples:

.\" This is a comment line.
.\" The next line is ignored:
.
.Sh EXAMPLES \" This is a comment, too.
example text \" And so is this.

Special Characters

Special characters are used to encode special glyphs and are rendered differently across output media. They may occur in request, macro, and text lines. Sequences begin with the escape character ‘\’ followed by either an open-parenthesis ‘(’ for two-character sequences; an open-bracket ‘[’ for n-character sequences (terminated at a close-bracket ‘]’); or a single one character sequence.

Examples:

See mandoc_char(7) for a complete list.

Text Decoration

Terms may be text-decorated using the ‘\f’ escape followed by an indicator: B (bold), I (italic), R (regular), or P (revert to previous mode). A numerical representation 3, 2, or 1 (bold, italic, and regular, respectively) may be used instead.

Examples:

Text decoration is not recommended for mdoc(7), which encourages semantic annotation.

Predefined Strings

Predefined strings, like Special Characters, mark special output glyphs. Predefined strings are escaped with the slash-asterisk, ‘\*’: single-character ‘\*X’, two-character ‘\*(XX’, and N-character ‘\*[N]’.

Examples:

Predefined strings are not recommended for use, as they differ across implementations. Those supported by mandoc(1) are listed in mandoc_char(7). Manuals using these predefined strings are almost certainly not portable.

Whitespace

Whitespace consists of the space character. In text lines, whitespace is preserved within a line. In request and macro lines, whitespace delimits arguments and is discarded.

Unescaped trailing spaces are stripped from text line input unless in a literal context. In general, trailing whitespace on any input line is discouraged for reasons of portability. In the rare case that a blank character is needed at the end of an input line, it may be forced by ‘\ \&’.

Literal space characters can be produced in the output using escape sequences. In macro lines, they can also be included in arguments using quotation; see MACRO SYNTAX for details.

Blank text lines, which may include whitespace, are only permitted within literal contexts. If the first character of a text line is a space, that line is printed with a leading newline.

Scaling Widths

Many requests and macros support scaled widths for their arguments. The syntax for a scaled width is ‘[+-]?[0-9]*.[0-9]*[:unit:]’, where a decimal must be preceded or followed by at least one digit. Negative numbers, while accepted, are truncated to zero.

The following scaling units are accepted:

Using anything other than ‘m’, ‘n’, ‘u’, or ‘v’ is necessarily non-portable across output media. See COMPATIBILITY.

If a scaling unit is not provided, the numerical value is interpreted under the default rules of ‘v’ for vertical spaces and ‘u’ for horizontal ones.

Examples:

Sentence Spacing

Each sentence should terminate at the end of an input line. By doing this, a formatter will be able to apply the proper amount of spacing after the end of sentence (unescaped) period, exclamation mark, or question mark followed by zero or more non-sentence closing delimiters (‘)’, ‘]’, ‘'’, ‘"’).

The proper spacing is also intelligently preserved if a sentence ends at the boundary of a macro line.

Examples:

Do not end sentences mid-line like this.  Instead,
end a sentence like this.
A macro would end like this:
.Xr mandoc 1 .

ad

Set line adjustment mode. This line-scoped request is intended to have one argument to select normal, left, right, or centre adjustment for subsequent text. Currently, it is ignored including its arguments, and the number of arguments is not checked.

am

Append to a macro definition. The syntax of this request is the same as that of de. It is currently ignored by mandoc(1), as are its children.

ami

Append to a macro definition, specifying the macro name indirectly. The syntax of this request is the same as that of dei. It is currently ignored by mandoc(1), as are its children.

am1

Append to a macro definition, switching roff compatibility mode off during macro execution. The syntax of this request is the same as that of de1. It is currently ignored by mandoc(1), as are its children.

cc

Changes the control character. Its syntax is as follows:

.cc [c]

If c is not specified, the control character is reset to ‘.’. Trailing characters are ignored.

de

Define a roff macro. Its syntax can be either

.de name
macro definition
..

or

.de name end
macro definition
.end

Both forms define or redefine the macro name to represent the macro definition, which may consist of one or more input lines, including the newline characters terminating each line, optionally containing calls to roff requests, roff macros or high-level macros like man(7) or mdoc(7) macros, whichever applies to the document in question.

Specifying a custom end macro works in the same way as for ig; namely, the call to ‘.end’ first ends the macro definition, and after that, it is also evaluated as a roff request or roff macro, but not as a high-level macro.

The macro can be invoked later using the syntax

Regarding argument parsing, see MACRO SYNTAX above.

The line invoking the macro will be replaced in the input stream by the macro definition, replacing all occurrences of \\$N, where N is a digit, by the Nth argument. For example,

.de ZN
\fI\^\\$1\^\fP\\$2
..
.ZN XtFree .

produces

in the input stream, and thus in the output: XtFree.

Since macros and user-defined strings share a common string table, defining a macro name clobbers the user-defined string name, and the macro definition can also be printed using the ‘\*’ string interpolation syntax described below ds, but this is rarely useful because every macro definition contains at least one explicit newline character.

In order to prevent endless recursion, both groff and mandoc(1) limit the stack depth for expanding macros and strings to a large, but finite number. Do not rely on the exact value of this limit.

dei

Define a roff macro, specifying the macro name indirectly. The syntax of this request is the same as that of de. It is currently ignored by mandoc(1), as are its children.

de1

Define a roff macro that will be executed with roff compatibility mode switched off during macro execution. This is a GNU extension not available in traditional roff implementations and not even in older versions of groff. Since mandoc(1) does not implement roff compatibility mode at all, it handles this request as an alias for de.

ds

Define a user-defined string. Its syntax is as follows:

The name and string arguments are space-separated. If the string begins with a double-quote character, that character will not be part of the string. All remaining characters on the input line form the string, including whitespace and double-quote characters, even trailing ones.

The string can be interpolated into subsequent text by using \*[name] for a name of arbitrary length, or \*(NN or \*N if the length of name is two or one characters, respectively. Interpolation can be prevented by escaping the leading backslash; that is, an asterisk preceded by an even number of backslashes does not trigger string interpolation.

Since user-defined strings and macros share a common string table, defining a string name clobbers the macro name, and the name used for defining a string can also be invoked as a macro, in which case the following input line will be appended to the string, forming a new input line passed to the roff parser. For example,

.ds badidea .S
.badidea
H SYNOPSIS

invokes the SH macro when used in a man(7) document. Such abuse is of course strongly discouraged.

el

The "else" half of an if/else conditional. Pops a result off the stack of conditional evaluations pushed by ie and uses it as its conditional. If no stack entries are present (e.g., due to no prior ie calls) then false is assumed. The syntax of this request is similar to if except that the conditional is missing.

EN

End an equation block. See EQ.

EQ

Begin an equation block. See eqn(7) for a description of the equation language.

ft

Change the font. Its syntax is as follows:

The following font arguments are supported:

This request takes effect only locally, may be overridden by macros and escape sequences, and is only supported in man(7) for now.

hy

Set automatic hyphenation mode. This line-scoped request is currently ignored.

ie

The "if" half of an if/else conditional. The result of the conditional is pushed into a stack used by subsequent invocations of el, which may be separated by any intervening input (or not exist at all). Its syntax is equivalent to if.

if

Begins a conditional. Right now, the conditional evaluates to true if and only if it starts with the letter n, indicating processing in nroff style as opposed to troff style. If a conditional is false, its children are not processed, but are syntactically interpreted to preserve the integrity of the input document. Thus,

will discard the ‘.ig’, which may lead to interesting results, but

will continue to syntactically interpret to the block close of the final conditional. Sub-conditionals, in this case, obviously inherit the truth value of the parent. This request has the following syntax:

.if COND \{\
BODY...
.\}

.if COND \{ BODY
BODY... \}

.if COND \{ BODY
BODY...
.\}

.if COND \
BODY

COND is a conditional statement. roff allows for complicated conditionals; mandoc is much simpler. At this time, mandoc supports only ‘n’, evaluating to true; and ‘t’, ‘e’, and ‘o’, evaluating to false. All other invocations are read up to the next end of line or space and evaluate as false.

If the BODY section is begun by an escaped brace ‘\{’, scope continues until a closing-brace escape sequence ‘.\}’. If the BODY is not enclosed in braces, scope continues until the end of the line. If the COND is followed by a BODY on the same line, whether after a brace or not, then requests and macros must begin with a control character. It is generally more intuitive, in this case, to write

.if COND \{\
.foo
bar
.\}

than having the request or macro follow as

The scope of a conditional is always parsed, but only executed if the conditional evaluates to true.

Note that the ‘\}’ is converted into a zero-width escape sequence if not passed as a standalone macro ‘.\}’. For example,

will result in ‘\}’ being considered an argument of the ‘Fl’ macro.

ig

Ignore input. Its syntax can be either

.ig
ignored text
..

or

.ig end
ignored text
.end

In the first case, input is ignored until a ‘..’ request is encountered on its own line. In the second case, input is ignored until the specified ‘.end’ macro is encountered. Do not use the escape character ‘\’ anywhere in the definition of end; it would cause very strange behaviour.

When the end macro is a roff request or a roff macro, like in

the subsequent invocation of if will first terminate the ignored text, then be invoked as usual. Otherwise, it only terminates the ignored text, and arguments following it or the ‘..’ request are discarded.

ne

Declare the need for the specified minimum vertical space before the next trap or the bottom of the page. This line-scoped request is currently ignored.

nh

Turn off automatic hyphenation mode. This line-scoped request is currently ignored.

rm

Remove a request, macro or string. This request is intended to have one argument, the name of the request, macro or string to be undefined. Currently, it is ignored including its arguments, and the number of arguments is not checked.

nr

Define a register. A register is an arbitrary string value that defines some sort of state, which influences parsing and/or formatting. Its syntax is as follows:

The value may, at the moment, only be an integer. So far, only the following register name is recognised:

nS

If set to a positive integer value, certain mdoc(7) macros will behave in the same way as in the SYNOPSIS section. If set to 0, these macros will behave in the same way as outside the SYNOPSIS section, even when called within the SYNOPSIS section itself. Note that starting a new mdoc(7) section with the Sh macro will reset this register.

ns

Turn on no-space mode. This line-scoped request is intended to take no arguments. Currently, it is ignored including its arguments, and the number of arguments is not checked.

ps

Change point size. This line-scoped request is intended to take one numerical argument. Currently, it is ignored including its arguments, and the number of arguments is not checked.

so

Include a source file. Its syntax is as follows:

The file will be read and its contents processed as input in place of the ‘.so’ request line. To avoid inadvertent inclusion of unrelated files, mandoc(1) only accepts relative paths not containing the strings "../" and "/..".

This request requires man(1) to change to the right directory before calling mandoc(1), per convention to the root of the manual tree. Typical usage looks like:

As the whole concept is rather fragile, the use of so is discouraged. Use ln(1) instead.

ta

Set tab stops. This line-scoped request can take an arbitrary number of arguments. Currently, it is ignored including its arguments.

tr

Output character translation. Its syntax is as follows:

Pairs of ab characters are replaced (a for b). Replacement (or origin) characters may also be character escapes; thus,

replaces all invocations of \(xx with \(yy.

T&

Re-start a table layout, retaining the options of the prior table invocation. See TS.

TE

End a table context. See TS.

TS

Begin a table, which formats input in aligned rows and columns. See tbl(7) for a description of the tbl language.