NAME
gettytab —
terminal configuration
database
SYNOPSIS
gettytab |
DESCRIPTION
The gettytab file is a simplified version
of the termcap(5) database used to describe terminal lines. The
initial terminal login process
getty(8) accesses the gettytab file each time
it starts, allowing simpler reconfiguration of terminal characteristics.
Each entry in the database is used to describe one class of terminals.
There is a default terminal class, default, that is used to set global defaults for all other classes. (That is, the default entry is read, then the entry for the class required is used to override particular settings.)
CAPABILITIES
Refer to termcap(5) for a description of the file layout. The default column below lists defaults obtained if there is no entry in the table obtained, nor one in the special default table.
| Name | Type | Default | Description |
| ap | bool | false | Terminal uses any parity. |
| bk | str | 0377 | Alternative end-of-line character (input break). |
| c0 | num | unused | TTY control flags to write messages. |
| c1 | num | unused | TTY control flags to read login name. |
| c2 | num | unused | TTY control flags to leave terminal as. |
| ce | bool | false | Use CRT erase algorithm. |
| ck | bool | false | Use CRT kill algorithm. |
| cl | str" | NULL |
Screen clear sequence. |
| co | bool | false | Console; add ‘\n’ after login
prompt. |
| ds | str | ‘^Y’ |
Delayed suspend character. |
| dx | bool | false | Set DECCTLQ. |
| ec | bool | false | Leave echo OFF. |
| ep | bool | false | Terminal uses even parity. |
| er | str | ‘^?’ |
Erase character. |
| et | str | ‘^D’ |
End of text (EOF) character. |
| ev | str | NULL |
Initial environment. |
| f0 | num | unused | TTY mode flags to write messages. |
| f1 | num | unused | TTY mode flags to read login name. |
| f2 | num | unused | TTY mode flags to leave terminal as. |
| fl | str | ‘^O’ |
Output flush character. |
| hc | bool | false | Do not hangup line on last close. |
| he | str | NULL |
Hostname editing string. |
| hn | str | hostname | Hostname. |
| ht | bool | false | Terminal has real tabs. |
| i0 | num | unused | TTY input flags to write messages. |
| i1 | num | unused | TTY input flags to read login name. |
| i2 | num | unused | TTY input flags to leave terminal as. |
| ig | bool | false | Ignore garbage characters in login name. |
| im | str | NULL |
Initial (banner) message. |
| in | str | ‘^C’ |
Interrupt character. |
| is | num | unused | Input speed. |
| kl | str | ‘^U’ |
Kill character. |
| l0 | num | unused | TTY local flags to write messages. |
| l1 | num | unused | TTY local flags to read login name. |
| l2 | num | unused | TTY local flags to leave terminal as. |
| lc | bool | false | Terminal has lower case. |
| lm | str | login: | Login prompt. |
| ln | str | ‘^V’ |
``Literal next'' character. |
| lo | str | /usr/bin/login | Program to execute when name obtained. |
| mb | bool | false | Do flow control based on carrier. |
| nl | bool | false | Terminal has (or might have) a newline character. |
| np | bool | false | Terminal uses no parity (i.e., 8-bit characters). |
| nx | str | default | Next table (for auto speed selection). |
| o0 | num | unused | TTY output flags to write messages. |
| o1 | num | unused | TTY output flags to read login name. |
| o2 | num | unused | TTY output flags to leave terminal as. |
| op | bool | false | Terminal uses odd parity. |
| os | num | unused | Output speed. |
| pc | str | ‘\0’ |
Pad character. |
| pe | bool | false | Use printer (hard copy) erase algorithm. |
| pf | num | 0 | Delay between first prompt and following flush (seconds). |
| pp | str | unused | PPP authentication program. |
| ps | bool | false | Line connected to a MICOM port selector. |
| qu | str | ‘^\’ |
Quit character. |
| rp | str | ‘^R’ |
Line retype character. |
| rw | bool | false | Do not use raw for input, use cbreak. |
| sp | num | unused | Line speed (input and output). |
| su | str | ‘^Z’ |
Suspend character. |
| tc | str | none | Table continuation. |
| to | num | 0 | Timeout (seconds). |
| tt | str | NULL |
Terminal type (for environment). |
| ub | bool | false | Do unbuffered output (of prompts etc). |
| we | str | ‘^W’ |
Word erase character. |
| xc | bool | false | Do not echo control characters as
‘^X’. |
| xf | str | ‘^S’ |
XOFF (stop
output) character. |
| xn | str | ‘^Q’ |
XON (start
output) character. |
The following capabilities are no longer supported by getty(8):
| bd | num | 0 | Backspace delay. |
| cb | bool | false | Use CRT backspace mode. |
| cd | num | 0 | Carriage-return delay. |
| fd | num | 0 | Form-feed (vertical motion) delay. |
| nd | num | 0 | Newline (line-feed) delay. |
| uc | bool | false | Terminal is known upper case only. |
If no line speed is specified, speed will not be altered from that which prevails when getty(8) is entered. Specifying an input or output speed will override line speed for stated direction only.
Terminal modes to be used for the output of the message
and for input of the login name, and to leave the terminal set as upon
completion, are derived from the boolean flags specified. If the derivation
should prove inadequate, any (or all) of these three may be overridden with
one of the c0,
c1,
c2,
i0,
i1,
i2,
l0,
l1,
l2,
o0,
o1, or
o2 numeric
specifications, which can be used to specify (usually in octal, with a
leading ‘0’) the exact values of the
flags. These flags correspond to the termios
c_cflag,
c_iflag,
c_lflag,
and
c_oflag
fields, respectively. Each of these sets must be completely specified to be
effective. The
f0,
f1, and
f2 are
excepted for backwards compatibility with a previous incarnation of the TTY
subsystem. In these flags the bottom 16 bits of the (32 bits) value contain
the sgttyb
sg_flags
field, while the top 16 bits represent the local mode word.
Should getty(8) receive a null character (presumed to indicate a line break) it will restart using the table indicated by the nx entry. If there is none, it will re-use its original table.
Delays are specified in milliseconds; the nearest possible delay available in the TTY driver will be used. Should greater certainty be desired, delays with values 0, 1, 2, and 3 are interpreted as choosing that particular delay algorithm from the driver.
The cl screen clear string may be preceded by a (decimal) number of milliseconds of delay required (a la termcap(5)). This delay is simulated by repeated use of the pad character pc.
The initial message and login message (im and lm) may include any of the following character sequences, which expand to information about the environment in which getty(8) is running:
- %d
- The current date.
- %h
- The hostname of the machine, which is normally obtained from the system
using
gethostname(3), but may also be overridden by the
hn table entry. In
either case it may be edited with the he string. A
‘
@’ in the he string causes one character from the real hostname to be copied to the final hostname. A ‘#’ in the he string causes the next character of the real hostname to be skipped. Each character that is neither ‘@’ nor ‘#’ is copied into the final hostname. Surplus ‘@’ and ‘#’ characters are ignored. - %t
- The TTY name.
- %m, %r, %s, %v
- The type of machine, release of the operating system, name of the operating system, and version of the kernel, respectively, as returned by uname(3).
- %%
- A ‘
%’ character.
When getty(8) executes the login process given in the lo string (usually /usr/bin/login), it will have set the environment to include the terminal type, as indicated by the tt string (if it exists). The ev string can be used to enter additional data into the environment. It is a list of comma-separated strings, each of which will presumably be of the form name=value.
If a non-zero timeout is specified with to, then getty(8) will exit within the indicated number of seconds, either having received a login name and passed control to login(1), or having received an alarm signal and exited. This may be useful to hangup dial in lines.
Output from
getty(8) is even parity unless op or
np is specified. The
op string may be specified with
ap to allow
any parity on input, but generate odd parity output. Note: this only applies
while getty(8) is being run; terminal driver limitations prevent a more
complete implementation.
getty(8) does not check parity of input characters in
RAW mode.
If a pp string is specified and a PPP link bring-up sequence is recognized, getty(8) will invoke the program referenced by the pp option. This can be used to handle incoming PPP calls.
SEE ALSO
HISTORY
The gettytab file format appeared in
4.2BSD.
BUGS
The special characters (erase, kill, etc.) are reset to system
defaults by login(1). In
all cases,
‘#’ or
‘^H’ typed in a login name will be
treated as an erase character, and ‘@’
will be treated as a kill character.
The delay stuff is a real crock. Apart from its general lack of flexibility, some of the delay algorithms are not implemented. The terminal driver should support sane delay settings.
The he capability is stupid.
The termcap(5) format is horrid; something more rational should have been chosen.