OpenBSD manual page server

Manual Page Search Parameters

CRONTAB(5) File Formats Manual CRONTAB(5)

crontabtables for driving cron

A crontab file contains instructions to the cron(8) daemon of the general form: “at these times on these dates run this command”. There may be a system crontab (/etc/crontab) and each user may have their own crontab (/var/cron/tabs/<user>). Commands in any given crontab will be executed either as the user who owns the crontab or, in the case of the system crontab, as the user specified in the command line. Uucp and News will usually each have their own crontab, eliminating the need for explicitly running su(1) as part of a cron(8) command.

While a crontab is a text file, it is not intended to be directly edited. Creation, modification, and removal of a crontab should be done using crontab(1).

Blank lines, leading spaces, and tabs are ignored. Lines whose first non-space character is a pound sign (‘#’) are comments, and are ignored. Note that comments are not allowed on the same line as cron(8) commands, since they will be taken to be part of the command. Similarly, comments are not allowed on the same line as environment variable settings.

An active line in a crontab is either an environment variable setting or a cron(8) command.

Environment variable settings create the environment any command in the crontab is run in. An environment variable setting is of the form:

name = value

where the spaces around the equal-sign (‘=’) are optional, and any subsequent non-leading spaces in value will be part of the value assigned to name. The value string may be placed in quotes (single or double, but matching) to preserve leading or trailing blanks.

Several environment variables are set automatically by the cron(8) daemon. SHELL is set to /bin/sh, and LOGNAME and HOME are set from the /etc/passwd line of the crontab's owner. HOME and SHELL may be overridden by settings in the crontab; LOGNAME may not.

Note: on BSD systems the LOGNAME variable is sometimes called USER. On OpenBSD, cron(8) will set both USER and LOGNAME to the same value.

In addition to LOGNAME, HOME, and SHELL, cron(8) will look at MAILTO if it has any reason to send mail as a result of running commands in “this” crontab. If MAILTO is defined (and non-empty), mail is sent to the user so named. If MAILTO is defined but empty (MAILTO = ""), no mail will be sent. Otherwise mail is sent to the owner of the crontab. This option is useful for pseudo-users that lack an alias that would otherwise redirect the mail to a real person.

The format of a cron(8) command is very much the V7 standard, with a number of upward-compatible extensions. Lines in the system crontab have six fixed fields plus a command in the form:

minute hour day-of-month month day-of-week user command

While lines in a user crontab have five fixed fields plus a command in the form:

minute hour day-of-month month day-of-week command

Fields are separated by blanks or tabs. The command may be one or more fields long. The allowed values for the fields are:

field
allowed values
-----
--------------
minute
* or 0-59
hour
* or 0-23
day-of-month
* or 1-31
month
* or 1-12 or a name (see below)
day-of-week
* or 0-7 or a name (0 or 7 is Sunday)
user
a valid username
command
text

Lists are allowed. A list is a set of numbers (or ranges) separated by commas. Examples: “1,2,5,9”,“0-4,8-12”.

Ranges of numbers are allowed. Ranges are two numbers separated with a hyphen. The specified range is inclusive. For example, 8-11 for an hour entry specifies execution at hours 8, 9, 10 and 11.

Step values can be used in conjunction with ranges. Following a range with /number specifies skips of number through the range. For example, “0-23/2” can be used in the hour field to specify command execution every other hour (the alternative in the V7 standard is “0,2,4,6,8,10,12,14,16,18,20,22”). Steps are also permitted after an asterisk, so if you want to say “every two hours”, just use “*/2”.

An asterisk (‘*’) is short form for a range of all allowed values.

Names can be used in the month and day-of-week fields. Use the first three letters of the particular day or month (case doesn't matter). Ranges or lists of names are not allowed.

The command field (the rest of the line) is the command to be run. The entire command portion of the line, up to a newline or % character, will be executed by /bin/sh or by the shell specified in the SHELL variable of the crontab. Percent signs (‘%’) in the command, unless escaped with a backslash (‘\’), will be changed into newline characters, and all data after the first ‘%’ will be sent to the command as standard input.

Commands are executed by cron(8) when the minute, hour, and month fields match the current time, when at least one of the two day fields (day-of-month or day-of-week, see Note below) match the current time. cron(8) examines crontab entries once every minute.

Note: The day of a command's execution can be specified by two fields — day-of-month and day-of-week. If both fields are restricted (i.e., aren't *), the command will be run when field matches the current time. For example,

30 4 1,15 * 5

would cause a command to be run at 4:30 am on the 1st and 15th of each month, plus every Friday.

Instead of the first five fields, one of eight special strings may appear:

string
meaning
------
-------
@reboot
Run once, at cron(8) startup.
@yearly
Run every January 1, "0 0 1 1 *".
@annually
(same as @yearly).
@monthly
Run the first day of every month, "0 0 1 * *".
@weekly
Run every Sunday, "0 0 * * 0".
@daily
Run every midnight, "0 0 * * *".
@midnight
(same as @daily).
@hourly
Run every hour, on the hour, "0 * * * *".

# use /bin/sh to run commands, no matter what /etc/passwd says
SHELL=/bin/sh
# mail any output to `paul', no matter whose crontab this is
MAILTO=paul
#
# run five minutes after midnight, every day
5 0 * * *       $HOME/bin/daily.job >> $HOME/tmp/out 2>&1
# run at 2:15pm on the first of every month -- output mailed to paul
15 14 1 * *     $HOME/bin/monthly
# run at 10 pm on weekdays, annoy Joe
0 22 * * 1-5	mail -s "It's 10pm" joe%Joe,%%Where are your kids?%
23 0-23/2 * * * echo "run 23 minutes after midn, 2am, 4am ..., everyday"
5 4 * * sun     echo "run at 5 after 4 every sunday"

crontab(1), cron(8)

When specifying day-of-week, both day 0 and day 7 will be considered Sunday. BSD and ATT seem to disagree about this.

Lists and ranges are allowed to coexist in the same field. “1-3,7-9” would be rejected by ATT or BSD cron — they want to see “1-3” or “7,8,9” .

Ranges can include “steps”, so “1-9/2” is the same as “1,3,5,7,9”.

Months or days of the week can be specified by name.

Environment variables can be set in the crontab. In BSD or ATT, the environment handed to child processes is basically the one from /etc/rc.

Command output is mailed to the crontab owner (BSD can't do this), can be mailed to a person other than the crontab owner (SysV can't do this), or the feature can be turned off and no mail will be sent at all (SysV can't do this either).

All of the ‘@’ commands that can appear in place of the first five fields are extensions.

Paul Vixie <vixie@isc.org>

July 16, 2013 OpenBSD-5.4