OpenBSD manual page server

Manual Page Search Parameters

VSBIC(4) Device Drivers Manual (mvme68k) VSBIC(4)

vsbicMVME327A SCSI and floppy controller

vsbic* at vmes0 addr 0xffffa600 ipl 2 vec 0x8c
vsbic* at vmes0 addr 0xffffa700 ipl 2 vec 0x8d

The vsbic driver supports the SCSI interface of the Motorola MVME327A SCSI and floppy VME controller. The WD33C93 SCSI controller found on this board is not directly accessible; instead, the vsbic driver runs SCSI commands through the MVME327A firmware interface.

The card's base address (matching the locator on the configuration line) is defined through a block of eight jumpers, labeled “J5” on the board, near its center.

With the card oriented with its faceplate at the bottom and the VME connectors at the top, the supported configurations are:

0xffffa600 1st board
0xffffa700 2nd board

cd(4), ch(4), intro(4), scsi(4), sd(4), st(4), uk(4)

Due to firmware limitations, SCSI commands using command blocks larger than 12 bytes are not supported. Therefore, only the first 2TB of SCSI disks are accessible.

August 14, 2012 OpenBSD-5.3