NAME
osiop
—
Symbios/NCR 53C710 SCSI
driver
SYNOPSIS
osiop* at gsc? irq 9
(hppa)
osiop0 at mc0 offset 0x47000 ipl 2
(mvme68k)
osiop0 at pcctwo0 offset 0x47000 ipl 2
(mvme68k/mvme88k)
DESCRIPTION
The osiop
driver provides support for the
Symbios/NCR 53C710 SCSI controller chip.
The Symbios/NCR 53C700 SCSI controller is handled by the oosiop(4) driver, while the Symbios/NCR 53C8xx PCI SCSI host adapters are handled by the siop(4) driver.
CONFIGURATION
The osiop
driver supports the following
flags
for use in config(8) files:
- bits 0-7:
- disable disconnect/reselect for the corresponding SCSI target
- bits 8-15:
- disable synchronous negotiation for SCSI target
- bits 16:
- disable DMA interrupts
"Target" is synonymous with SCSI ID number.
Note that SCSI tape drives should be allowed to perform disconnect/reselect or performance will suffer.
SEE ALSO
cd(4), ch(4), intro(4), oosiop(4), scsi(4), sd(4), siop(4), st(4), uk(4)
HISTORY
The osiop
driver first appeared in
NetBSD 1.6.
The original NCR 53C710 driver appeared in NetBSD 1.0 amiga port, and Izumi Tsutsui ⟨tsutsui@ceres.dti.ne.jp⟩ modified the driver and made it machine-independent.