OpenBSD manual page server

Manual Page Search Parameters

ISP(4) Device Drivers Manual ISP(4)

ispQLogic based SCSI or Fibre Channel SCSI interface

isp* at pci? (PCI)
#option ISP_FIRMWARE_1000
isp* at sbus? (SBus)
#option ISP_FIRMWARE_1040
#option ISP_FIRMWARE_1080
#option ISP_FIRMWARE_12160
#option ISP_FIRMWARE_2100
#option ISP_FIRMWARE_2200
#option ISP_FIRMWARE_2300

This driver provides access to a SCSI bus or a Fibre Channel connected to QLogic ISP1000 (SBus), ISP1020 (PCI), ISP1040 (PCI), ISP1080 (PCI), ISP12160 (PCI) SCSI host adapters or ISP2100 (PCI/SBus), ISP2200 (PCI/SBus) Fibre Channel or ISP2300 (PCI/SBus) 2-Gigabit Fibre Channel host adapters.

Features include support for UltraSCSI and wide mode transactions for SCSI, and Ultra2 LVD (for the ISP1080) and Ultra3 LVD (for the ISP12160) and the FCP SCSI (private loop, public loop or fabric) for Fibre Channel. Command tagging is supported for all (in fact, Fibre Channel requires tagging).

Adding option ISP_COMPILE_FW to the kernel configuration file ensures that known good firmware will be downloaded to the driver at attach time. This is the default setting on sparc, sparc64 and macppc platforms, and is also recommended on platforms where the card's bios may not be initialized upon power-up.

cd(4), ch(4), intro(4), pci(4), sbus(4), scsi(4), sd(4), ses(4), st(4), uk(4)

The isp driver was written by Matthew Jacob for NASA/Ames Research Center.

August 14, 2012 OpenBSD-5.3