OpenBSD manual page server

Manual Page Search Parameters

PKG_ADD(1)                 OpenBSD Reference Manual                 PKG_ADD(1)

NAME
     pkg_add - install software package distributions

SYNOPSIS
     pkg_add [-acIinqruvx] [-A arch] [-B pkg-destdir] [-F keywords]
             [-L localbase] [-P type] [-Q quick-destdir] pkg-name [...]

DESCRIPTION
     The pkg_add command is used to install packages created with the
     pkg_create(1) command.  Selected packages containing pre-compiled appli-
     cations from the /usr/ports tree can be found on the OpenBSD FTP site or
     on the official OpenBSD CD.

           Note: System distribution files, e.g., base28.tgz, comp28.tgz, are
           not packages and may not be installed using pkg_add.

     Each package name may be specified as a filename (which normally consists
     of the package name itself plus the ``.tgz'' suffix) or a URL referring
     to FTP, HTTP, or SCP locations.  The following examples are valid:

     pkg_add -v ftp://ftp.openbsd.org/pub/OpenBSD/2.7/packages/i386/m4-1.4.tgz
     pkg_add -v scp://login@host/usr/ports/packages/sparc/all/tcl-8.4.7.tgz

     If the given package names are not found in the current working directo-
     ry, pkg_add will search for them in each directory named by the PKG_PATH
     environment variable.  Since a few URL schemes contain colons, pkg_add
     relies on each directory ending in a / to split the path correctly.
     Specifying `-' as a package name causes pkg_add to read from the standard
     input.

     If the environment variable PKG_CACHE is set, every package retrieved
     from a distant location will also be copied here.

     Some packages may depend on other packages.  When resolving dependencies
     pkg_add will first look at already installed packages, then match depen-
     dencies with the list of packages left to install, then install default
     packages that satisfy the dependencies.

     Alternatively, it is possible to add packages interactively from within
     the ftp(1) client, in which case setting PKG_PATH correctly will be nec-
     essary for any dependency to be found out and retrieved the same way.
     For example, the following works:

           $ ftp ftp://ftp.openbsd.org/pub/OpenBSD/2.7/packages/i386/
           250 CWD command successful
           ftp> ls m*
           227 Entering Passive Mode (129,128,5,191,164,73)
           150 Opening ASCII mode data connection for m*.
           m4-1.4.tgz
           metamail-2.7.tgz
           mh-6.8.4.tgz
           mm-1.0.12.tgz
           mpeg_lib-1.2.1.tgz
           mpeg_play-2.4.tgz
           mpg123-0.59q.tgz
           mutt-0.95.7i.tgz
           226 Transfer complete.
           ftp> get m4-1.4.tgz "|pkg_add -v -"

     Warning: Since the pkg_add command may execute scripts or programs con-
     tained within a package file, your system may be susceptible to ``trojan
     horses'' or other subtle attacks from miscreants who create dangerous
     packages.  Be sure the specified package(s) are from trusted sources.

     The options are as follows:

     -A arch  Assume arch as current machine architecture for any package
              tests.

     -a       Automated package installation; do not record packages as in-
              stalled manually.

     -B pkg-destdir
              Set pkg-destdir as the prefix to prepend to any object extracted
              from the package.

     -c       While replacing packages, delete extra configuration file in the
              old package, mentioned as
                    @extra file
              in the packing-list.

     -F keywords
              Force installation of the package.  keywords is a comma-separat-
              ed list of keywords that state what failsafes should be waived.
              These include:

              allversions      do not trim older p* variants of packages for
                               updates.
              alwaysupdate     proceed with an update even if pkg_add can't
                               find new packages for all installed packages.
              arch             architecture recorded in package may not match.
              boguslibs        not all shared libraries are marked with @lib.
                               Inefficiently rescan package lists for non
                               marked libraries.
              installed        in update mode, reinstall an existing package
                               with the same signature.
              kitchensink      will install everything and the kitchen sink:
                               randomly reorder the list of packages to in-
                               stall, and proceed after weeding out conflicts.
              libdepends       library specifications may not be fulfilled.
              noclosure        do not compute the closure of dependencies to
                               figure out which packages to update when using
                               -u.
              nonroot          install even if not running as root.
              pkgpath          with -u, do not check the pkgpath matches if
                               only one candidate is found.
              scripts          external scripts may fail.
              update           unsafe update: old packing-list will run
                               scripts that may fail.
              updatedepends    force update even if forward dependencies no
                               longer match.

     -I       If scripts exist for a given package, do not execute them.

     -i       Switch on interactive mode.  pkg_add may ask questions to the
              user if faced with difficult decisions.

     -L localbase
              Install a package under localbase.  By default, localbase equals
              /usr/local, and specifying it is not necessary.  However, pack-
              ages can be created using a different localbase (see
              pkg_create(1)), and those packages can only be installed by us-
              ing the same localbase.  See bsd.port.mk(5) for a description of
              LOCALBASE.

     -n       Don't actually install a package, just report the steps that
              would be taken if it was.

     -P type  Check permissions for distribution, where type can be `cdrom' or
              `ftp'.

     -Q quick-destdir
              Quick and dirty installation under quick-destdir.  Contrary to
              -B pkg-destdir, symbolic links are resolved, and package instal-
              lation stops at @endfake marker.

     -q       Replace package quickly; do not bother checking MD5s before re-
              moving files.

     -r       Replace existing packages.  pkg_add will try to take every pre-
              caution to make sure the replacement can proceed before removing
              the old package and adding the new one, and it should also han-
              dle shared libraries correctly.  Among other things, pkg_add
              will refuse to replace packages as soon as it needs to run
              scripts that might fail (use -F update to force the
              replacement); pkg_add will also refuse to replace packages when
              the dependencies don't quite match (use -F updatedepends to
              force the replacement).

     -u       Update the given pkgname(s), and anything it depends upon.  If
              no pkgname is given, pkg_add will update all installed packages.
              This relies on PKG_PATH to figure out the new package names.

     -v       Turn on verbose output.  Several -v turn on more verbose output.

     -x       Disable progress-meter.

     By default, when adding packages via FTP, the ftp(1) program operates in
     ``passive'' mode.  If you wish to use active mode instead, set the
     FTPMODE environment variable to ``active''.  If pkg_add consistently
     fails to fetch a package from a site known to work, it may be because the
     site does not support passive mode FTP correctly.  This is very rare
     since pkg_add will try active mode FTP if the server refuses a passive
     mode connection.

   Technical details
     pkg_add extracts each package's ``packing information'' (the packing
     list, description, and installation/deinstallation scripts) into a spe-
     cial staging directory in /var/tmp (or PKG_TMPDIR if set - see CAVEATS,
     below) and then runs through the following sequence to fully extract the
     contents of the package:

     1.   A check is made to determine if the package is already recorded as
          installed.  If it is, installation is terminated.

     2.   A check is made to determine if the package conflicts (from @pkgcfl
          directives; see pkg_create(1)) with a package already recorded as
          installed.  If it is, installation is terminated.

     3.   For packages tagged with architecture constraints, pkg_add verifies
          that the current machine architecture agrees with the constraints.

     4.   All package dependencies (from @depend and @wantlib directives; see
          pkg_create(1)) are read from the packing list.  If any of these de-
          pendencies are not currently fulfilled, an attempt is made to find a
          package that meets them and install it, looking first in the list of
          packages to install passed to pkg_add; if no adequate package can be
          found and installed, the installation is terminated.

     5.   pkg_add checks for collisions with installed file names, read-only
          file systems, and enough space to store files.

     6.   If the package contains a require script (see pkg_create(1)), it is
          executed with the following arguments:

          pkg-name      The name of the package being installed

          INSTALL       Keyword denoting to the script that it is to run an
                        installation requirements check (the keyword is useful
                        only to scripts which serve multiple functions).

          If the require script exits with a non-zero status code, the instal-
          lation is terminated.

     7.   If the package contains an install script, it is executed with the
          following arguments:

          pkg-name      The name of the package being installed.

          PRE-INSTALL   Keyword denoting that the script is to perform any ac-
                        tions needed before the package is installed.

          If the install script exits with a non-zero status code, the instal-
          lation is terminated.

     8.   The packing list is used as a guide for extracting files from the
          package into their final locations.

     9.   If an install script exists for the package, it is executed with the
          following arguments:

          pkg_name      The name of the package being installed.

          POST-INSTALL  Keyword denoting that the script is to perform any ac-
                        tions needed after the package has been installed.

     10.  After installation is complete, a copy of all package files such as
          the packing-list, the install and deinstall scripts, the description
          file is made into /var/db/pkg/<pkg-name> for subsequent possible use
          by pkg_delete(1) and pkg_info(1).  Any package dependencies are
          recorded in the other packages' /var/db/pkg/<other-pkg>/+REQUIRED_BY
          file (if the environment variable PKG_DBDIR is set, this overrides
          the /var/db/pkg/ path shown above).

     11.  Finally, the staging area is deleted and the program terminates.

     Note that it is safe to interrupt pkg_add through SIGINT, SIGHUP, and
     other signals, as it will safely record an interrupted install as
     partial-<pkgname>[.n].

     When replacing packages, the procedure is slightly different.

     1.   A check is made to determine if a similar package is already in-
          stalled.  If its signature is identical to that of the new package,
          no replacement is performed (unless -F installed is specified).

     2.   A check is made to determine what old package the new package should
          replace, using conflicts.

     3.   A check is made to determine whether the old package will be deleted
          without issue, and whether the new package will install correctly.
          This includes refusing to run any code (unless -F update), and veri-
          fying that the new package still matches dependencies (unless -F up-
          datedepends).

     4.   Shared libraries deserve special treatment: each shared library from
          the old package that does no longer exist in the new package, but
          that is required from a wantlib of another package is kept along in
          a stub package named .libs-<pkgname>.

     5.   The new package is extracted to the filesystem, using temporary
          filenames of the form pkg.XXXXXXX since the old package is still
          there.  The packing-list is amended to record these names as @temp
          annotations, in cases the installation fails.

     6.   The old package is deleted as usual, except that some packages may
          still depend on it.

     7.   The new package is installed as usual, except that the files are al-
          ready present and only need to be renamed.

     8.   Dependencies from the old package are adjusted to point to the new
          package.

     To update packages in -u mode, pkg_add performs the following steps.

     1.   Packages to update are checked for dependencies, and their dependen-
          cies are marked for update as well, unless -F noclosure.

     2.   Each package name is reduced to its stem, and every package name
          with matching stem available through PKG_PATH is considered as an
          update candidate.

     3.   Some minimal version matching occurs: out of all p* variations of a
          given package, only the most recent package is kept (unless -F al-
          lversions is given).  Note that pkg_add does not try to compare ver-
          sions in a smarter way, thus PKG_PATH should point to a snapshot of
          packages for a given version of OpenBSD, similar to the organization
          on the FTP sites.

     4.   Candidates are then matched according to their source paths (the
          subdirectory of the ports dir, plus flavors and multi-packages modi-
          fiers), in order to weed out similar packages with distinct options.

     5.   The signature of the candidate is compared to the signature of the
          already installed package: identical signatures mean no update need-
          ed.

     6.   If several candidates are left, pkg_add will ask the user in inter-
          active mode, and not perform the update in non-interactive mode.

     7.   Once a suitable update candidate has been found for every package,
          pkg_add proceeds to print out the list of new packages, and then
          performs the update.

     8.   If some updates can't be solved, pkg_add stops before the update,
          unless -F alwaysupdate.

ENVIRONMENT
     FTPMODE      Specifies whether ftp(1) should operate in ``active'' or
                  ``passive'' mode.  The default is ``passive''.

     PKG_DBDIR    Where to register packages instead of /var/db/pkg.

     PKG_DESTDIR  Value for pkg-destdir, if no -B option is specified; value
                  passed to any INSTALL or REQUIRE script invoked from the
                  package.

     PKG_CACHE    If set, any package retrieved from a distant location will
                  be copied to that directory as well.

     PKG_PATH     If a given package name cannot be found, the directories
                  named by PKG_PATH are searched.  It should contain a series
                  of entries separated by colons.  Each entry consists of a
                  directory name, ending in a slash.  URL schemes such as FTP,
                  HTTP, or SCP are also appropriate.  The current directory
                  may be indicated implicitly by an empty directory name, or
                  explicitly by a single period (`./').

     PKG_TMPDIR   Temporary area where package information files will be ex-
                  tracted, instead of /var/tmp.

SEE ALSO
     ftp(1), pkg_create(1), pkg_delete(1), pkg_info(1), bsd.port.mk(5),
     package(5)

AUTHORS
     Jordan Hubbard
             Initial design.
     Marc Espie
             Complete rewrite.

CAVEATS
     Package extraction does need a temporary area that can hold executable
     scripts.

     pkg_add looks through ${PKG_TMPDIR}, ${TMPDIR}, /var/tmp, /tmp, and
     /usr/tmp for such an area, in sequence.

     If ${TMPDIR} and /var/tmp are mounted noexec, you must currently set
     PKG_TMPDIR to a suitable area, as pkg_add does not check for noexec sta-
     tus except by failing to run installation scripts.

BUGS
     scp(1) processes do not die like they should when their pipe is closed,
     so using pkg_add over SCP consumes an insane amount of resources.

OpenBSD 3.9                    November 25, 1994                             6