[OpenBSD]

Manual Page Search Parameters

LM(4) Device Drivers Manual LM(4)

NAME

lmNational Semiconductor LM78/79/81 temperature, voltage, and fan sensor

SYNOPSIS

lm0 at isa? port 0x290
lm1 at isa? port 0x280
lm2 at isa? port 0x310
lm* at iic?
lm* at wbsio?

DESCRIPTION

The lm driver provides support for the National Semiconductor LM78/79/81 hardware monitors and register compatible chips to be used with the sysctl(8) interface.
The original LM78 hardware monitor supports 11 sensors:
Sensor Units Typical Use
IN0 uV DC Core voltage
IN1 uV DC Unknown
IN2 uV DC +3.3V
IN3 uV DC +5V
IN4 uV DC +12V
IN5 uV DC -12V
IN6 uV DC -5V
Temp uK Motherboard Temperature
Fan0 RPM Fan
Fan1 RPM Chassis Fan
Fan2 RPM Fan
For other devices, sensors' names and numbers will be different.

HARDWARE

Chips supported by the lm driver include:
Some devices can attach to both iic(4) and isa(4); others can only attach to either one or the other. If the lm driver detects a device attaching to both iic(4) and isa(4), it will detach the device from iic(4).

SEE ALSO

iic(4), isa(4), wbsio(4), sensorsd(8), sysctl(8)

HISTORY

The lm driver first appeared in NetBSD 1.5; OpenBSD support was added in OpenBSD 3.4.

AUTHORS

The lm driver was written by Bill Squier and ported to OpenBSD 3.4 by Alexander Yurchenko <grange@openbsd.org>. The driver was largely rewritten for OpenBSD 3.9 by Mark Kettenis <kettenis@openbsd.org>.

CAVEATS

Some vendors connect these chips to non-standard thermal diodes and resistors. This will result in bogus sensor values.

BUGS

Interrupt support is unimplemented.
There are currently no known pnpbios IDs assigned to LM chips.
This driver attaches to the Winbond W83791SD chip even though that chip does not have any sensors.
July 16, 2013 OpenBSD-current