IWN(4) | Device Drivers Manual | IWN(4) |
iwn
— Intel WiFi
Link and Centrino IEEE 802.11a/b/g/n wireless network devices
iwn* at pci?
The iwn
driver provides support for Intel
Wireless WiFi Link 4965/5000/1000 and Centrino Wireless-N 1000/2000/6000
Series PCIe Mini Card network adapters.
The Intel Wireless WiFi Link 4965AGN (codenamed Kedron) is a PCIe Mini Card network adapter that operates in the 2GHz and 5GHz spectra. It has 2 transmit paths and 3 receiver paths (2T3R). It is part of the fourth-generation Centrino platform (codenamed Santa Rosa).
The Intel WiFi Link 5000 series is a family of wireless network
adapters that operate in the 2GHz and 5GHz spectra. They are part of the
fifth-generation Centrino platform (codenamed Montevina). These adapters are
available in both PCIe Mini Card (model code ending by MMW) and PCIe Half
Mini Card (model code ending by HMW) form factor. The
iwn
driver provides support for the 5100 (codenamed
Shirley Peak 1x2), 5150 (codenamed Echo Peak-V), 5300 (codenamed Shirley
Peak 3x3) and 5350 (codenamed Echo Peak-P) adapters. The 5100 and 5150
adapters have 1 transmit path and 2 receiver paths (1T2R). The 5300 and 5350
adapters have 3 transmit paths and 3 receiver paths (3T3R).
The Intel WiFi Link 1000 (codenamed Condor Peak) is a single-chip wireless network adapter that operates in the 2GHz spectrum. It is part of the sixth-generation Centrino platform (codenamed Calpella). It is available in both PCIe Mini Card (model code ending by MMW) and PCIe Half Mini Card (model code ending by HMW) form factor. It has 1 transmit path and 2 receiver paths (1T2R).
The Intel Centrino Ultimate-N 6300 (codenamed Puma Peak 3x3) is a single-chip wireless network adapter that operates in the 2GHz and 5GHz spectra. It has 3 transmit paths and 3 receiver paths (3T3R). The Intel Centrino Advanced-N 6250 (codenamed Kilmer Peak) is a combo WiFi/WiMAX network adapter that operates in the 2GHz and 5GHz spectra. It has 2 transmit paths and 2 receiver paths (2T2R). The Intel Centrino Advanced-N 6200 (codenamed Puma Peak 2x2) is a wireless network adapter that operates in the 2GHz and 5GHz spectra. It has 2 transmit paths and 2 receiver paths (2T2R). These adapters are part of the sixth-generation Centrino platform (codenamed Calpella).
The Intel Centrino Wireless-N 2230 (codename Jackson Peak) and Intel Centrino Wireless-N 2200 (codename Marble Peak) are wireless network adapters that operate in the 2GHz spectrum. These adapters have 2 transmit paths and 2 receiver paths (2T2R). The Intel Centrino Wireless-N 135 and Intel Centrino Wireless-N 105 (codename Canyon Peak) also operate in the 2GHz spectrum. These adapters have 1 transmit path and 1 receiver path (1T1R).
These are the modes the iwn
driver can
operate in:
The iwn
driver can be configured to use
Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA1 and WPA2).
WPA2 is the current encryption standard for wireless networks. It is
strongly recommended that neither WEP nor WPA1 are used as the sole
mechanism to secure wireless communication, due to serious weaknesses. WPA1
is disabled by default and may be enabled using the option
"wpaprotos
wpa1,wpa2". For standard WPA networks which use
pre-shared keys (PSK), keys are configured using the
"wpakey
" option. WPA-Enterprise networks
require use of the wpa_supplicant package. The iwn
driver offloads both encryption and decryption of unicast data frames to the
hardware for the CCMP cipher.
In BSS mode the driver supports powersave mode and background scanning; see ifconfig(8).
The iwn
driver can be configured at
runtime with ifconfig(8) or
on boot with
hostname.if(5).
The driver needs at least version 5.6 of the following firmware files, which are loaded when an interface is brought up:
These firmware files are not free because Intel refuses to grant distribution rights without contractual obligations. As a result, even though OpenBSD includes the driver, the firmware files cannot be included and users have to download these files on their own.
A prepackaged version of the firmware can be installed using fw_update(1).
The following example scans for available networks:
# ifconfig iwn0 scan
The following hostname.if(5) example configures iwn0 to join network “mynwid”, using WPA key “mywpakey”, obtaining an IP address using DHCP:
nwid mynwid wpakey mywpakey dhcp
arp(4), ifmedia(4), intro(4), netintro(4), pci(4), hostname.if(5), ifconfig(8)
The iwn
device driver first appeared in
OpenBSD 4.3.
The iwn
driver was written by
Damien Bergamini
<damien.bergamini@free.fr>.
802.11n operation is currently limited to data rates MCS 0 to MCS 7.
Support for 802.11n 40MHz channels is not yet implemented. Additional work is required in ieee80211(9) before this feature can be supported.
May 3, 2021 | OpenBSD-7.0 |