[OpenBSD]

Manual Page Search Parameters
SAN(4) Device Drivers Manual SAN(4)

NAME

sanSangoma Technologies AFT T1/E1 network device

SYNOPSIS

san* at pci?

DESCRIPTION

The san device driver supports the Sangoma Technologies Inc AFT Series Network cards. This includes the following models:
The following media types and options (as given to ifconfig(8)) are supported:
 
 
media T1
Configure Sangoma card for T1, B8ZS, ESF, all channels (default).
 
 
media T1-AMI
Configure Sangoma card for T1, AMI, ESF, all channels.
 
 
media E1
Configure Sangoma card for E1, HDB3, NCRC4, all channels.
 
 
media E1-AMI
Configure Sangoma card for E1, AMI, NCRC4, all channels.
If no media options are present, the san driver places the card into default mode (T1, B8ZS, ESF, all channels).
Use ifconfig(8) to change the timeslot range for this card. The following format is supported:
 
 
# ifconfig san0 timeslot all
Enable all channels for this card.
 
 
# ifconfig san0 timeslot 1-10
Enable channels 1-10 for this card.
 
 
# ifconfig san0 timeslot 1-10.14-15.20
Enable channels 1-10, 14-15 and 20 for this card.
If the timeslot option is not present, the san driver configures the card to use all the channels.

DIAGNOSTICS

san0: couldn't map memory
A fatal initialization error has occurred.
san0: No PCI memory allocated for CPU #B
A fatal initialization error has occurred.
san0: couldn't map interrupt
A fatal initialization error has occurred.
san0: IRQ not allocated
A fatal initialization error has occurred.

SEE ALSO

ifmedia(4), pci(4), hostname.if(5), ifconfig(8)

HISTORY

The san device driver first appeared in OpenBSD 3.6.

AUTHORS

The san device driver and this manual page were written by Alex Feldman.

BUGS

There is no hardware documentation.
There appears to be a memory corruption bug during device initialization.
Since Sangoma stopped supporting the driver, it is unlikely that these bugs will be fixed.
January 15, 2015 OpenBSD-5.7