OpenBSD manual page server

Manual Page Search Parameters
INSTALLBOOT(8) System Manager's Manual (sparc64) INSTALLBOOT(8)

installbootinstall a bootstrap on an FFS filesystem partition

installboot [-nv] bootblk device

installboot prepares an FFS filesystem partition for boot-strapping from the PROM. The sparc64 boot process is split into two parts: a small first-stage bootblock that is written into the superblock area of a partition (and hence is limited in size to SBSIZE - DEV_BSIZE bytes), and a second-stage boot program that resides in the filesystem proper. The first-stage bootblock is loaded into memory by the PROM. After it receives control, it loads the second-stage boot program ofwboot from the filesystem. The second-stage boot program uses the device driver interface to the PROM and the stand-alone filesystem code in “libsa.a” to locate and load the kernel. The first-stage bootblock and second-stage boot program can be found in /usr/mdec/bootblk and /usr/mdec/ofwboot respectively. The second-stage boot program commonly resides in the root directory as /ofwboot.

The options are as follows:

Do not actually write anything on the disk.
Verbose mode.

The arguments are:

the name of the file containing the first-stage bootblock.
the name of the raw device in which the first-stage boot program is to be installed. This should correspond to the block device on which the file system containing ofwboot is mounted.

The following commands will install the first-stage bootblock in the root filesystem (assumed to be mounted on “sd0a”) using the file /ofwboot as the second-stage boot program:

# cp /usr/mdec/ofwboot /ofwboot
# /usr/mdec/installboot /usr/mdec/bootblk sd0a

disklabel(8), init(8)

The installboot first appeared in NetBSD 1.1.

January 1, 2012 OpenBSD-5.1