NAME
adduser
, rmuser
— add and delete users from the
system
SYNOPSIS
adduser |
[-batch username
[group[,group] ...]
[fullname] [password]]
[-check_only ]
[-class login_class]
[-config_create ]
[-dotdir directory]
[-e method
| -encryption method]
[-group login_group]
[-h | -help | -? ]
[-home partition]
[-message file]
[-noconfig ]
[-shell shell]
[-s | -silent | -q | -quiet ]
[-uid_start uid]
[-uid_end uid]
[-v | -verbose ]
[-unencrypted ] |
rmuser |
[username] |
DESCRIPTION
The adduser
program adds new users to the
system. The rmuser
program removes users from the
system. When not passed any arguments, both utilities operate in interactive
mode and prompt for any required information.
The options are as follows:
-batch
username [group[,group] ...] [fullname] [password]- Enter batch mode in which multiple users are specified on the command-line in a compact format. By default the password is assumed to already be properly encrypted.
-check_only
- Check the passwd, group, and shells databases for consistency and problems then exit without performing any other operation.
-class
login_class- Use the specified login_class as the default user login class. See login.conf(5) for further details.
-config_create
- Create or edit default configuration information and message file before proceeding with the normal interactive adduser procedure.
-dotdir
directory- Copy files from directory into the HOME directory of new users. Files named in the fashion of “dot.foo” will be renamed to “.foo”. By default, all files are made writable and readable by their owner.
-encryption
,-e
method- Encrypt local passwords using method of encryption as described in login.conf(5). If method is “auto”, the encryption type will be derived from the user's login class.
-group
login_group- Specify the default login group. A value of USER means that the username is to be used as the login group.
-help
,-h
,-?
- Print a summary of options and exit.
-home
partition- Specify the default home partition where all users' home directories are to be located.
-message
file- Send new users a welcome message from file. Specifying a value of “no” for file causes no message to be sent to new users.
-noconfig
- Do not read the default configuration file.
-shell
shell- Specify the default shell for new users.
-silent
,-s
,-quiet
,-q
- Causes the program to print fewer warnings, questions, and bug reports.
-uid_start
uid- Use UIDs from uid up when automatically generating UIDs.
-uid_end
uid- Do not use UIDs higher than uid when generating UIDs.
-unencrypted
- Causes the program to assume that the password given in batch mode is unencrypted. The password will be encrypted before being added to the password file. Use of this option is discouraged, as the username and cleartext password will appear in the process list, which is visible to users.
-verbose
,-v
- Causes the program to print many warnings and questions. This option is recommended for novice users.
adduser
first performs consistency checks
on the password, group, and shell databases. This includes finding any
duplicate user or group names, illegal shells, or shells that aren't
executable. Once these tests are passed, adduser
performs the following operations for each new user:
- Add the appropriate entries to the password and group files and re-generate the password database using pwd_mkdb(8).
- Create a home directory and copy all files from the skeletal login directory (normally /etc/skel) to this new directory. Files named in the fashion of “dot.foo” will be renamed to “.foo” in the new directory.
- Mails the new user a welcome message at the discretion of the account creator.
Similarly, when removing a user, rmuser
performs the following operations for the given
username:
- Removes any crontab(1) entries or at(1) jobs belonging to the user.
- Removes the user from the password database and all groups in the group
database. If a group becomes empty and its name is the same as the
username, the group is removed (this complements
adduser
's unique per-user groups). - Recursively deletes all files in the user's home directory and removes the
directory itself (provided the directory actually belongs to the user).
rmuser
prompts for confirmation before actually doing this. - Removes the user's incoming mail file if one exists.
Understandably, rmuser
politely refuses to
remove users whose UID is 0 (typically root).
RESTRICTIONS
- username
- It is recommended that login names contain only lowercase characters and
digits. They may also contain uppercase characters, non-leading hyphens,
periods, underscores, and a trailing
‘
$
’. Login names may not be longer than 31 characters. If you need a longer login name for e-mail addresses, you can define an alias in /etc/mail/aliases. - fullname
- This should contain the user's first name and surname. The
‘
:
’ is not permitted. - login_class
- The specified user login class must exist in /etc/login.conf.
- shell
- Only valid entries from the shells(5) database or entries corresponding to sliplogin(8) and pppd(8) are permitted.
- uid_start
- This value is the start of the range where free UID values are searched for. This value must be less than the value of uid_end. The default value is 1000 or as configured in the configuration file.
- uid_end
- This value is the end of the range where free UID values are searched for. This value must be more than the value of uid_start. The default value is 2147483647 or as configured in the configuration file.
- gid/login group
- This value is generated automatically, but can be specified at the discretion of the person invoking the program.
- password
- If not empty, the password is encrypted according to login.conf(5). If empty, the account will be automatically disabled to prevent spurious access to it.
CONFIGURATION
adduser
follows these steps to extract its
configuration information:
- Read internal variables.
- Read configuration file (/etc/adduser.conf).
- Parse command-line options.
The adduser.conf format is explained within that file and is quite straightforward.
FILES
- /etc/master.passwd
- user database
- /etc/group
- group database
- /etc/shells
- shell database
- /etc/ptmp
- lock file for the passwd database
- /etc/adduser.conf
- configuration file for
adduser
- /etc/adduser.message
- message file for
adduser
- /etc/skel
- skeletal login directory
- /var/log/adduser
- log file for
adduser
EXAMPLES
Start adduser
in interactive mode:
# adduser
Create user “falken” and login group “falken”. Invite user “falken” into groups “guest”, “staff”, and “beer”. Realname (fullname) is “Prof. Falken”. The password has been created using encrypt(1):
# adduser -batch falken guest,staff,beer 'Prof. Falken' \ $2a$06$1Sdjxjoxg4cNmT6zAxriGOLgdLXQ3HdJ2dKBbzEk68jSrO1EtLJ3C
Create user “vehlefanz” in login group “guest”. Start the free UID search at 5000. No other groups, no realname, no password. Send a welcome message:
# adduser -uid_start 5000 -group guest \ -message /etc/adduser.message -batch vehlefanz
Create user “jsmith” and place in the “jsmith” login group. Also add to the “staff” group. No password:
# adduser -group USER -batch jsmith
staff
SEE ALSO
chpass(1), finger(1), passwd(1), setlogin(2), aliases(5), group(5), login.conf(5), passwd(5), shells(5), nologin(8), pwd_mkdb(8), vipw(8), yp(8)