OpenBSD manual page server

Manual Page Search Parameters

WSCONS(4) Device Drivers Manual WSCONS(4)

wsconsconsole access

option WSEMUL_SUN
option WSEMUL_NO_VT100
option WSEMUL_DEFAULT="xxx"
option WS_KERNEL_FG=WSCOL_XXX
option WS_KERNEL_BG=WSCOL_XXX
option WSDISPLAY_COMPAT_PCVT
option WSDISPLAY_COMPAT_SYSCONS
option WSDISPLAY_COMPAT_USL
option WSDISPLAY_COMPAT_RAWKBD


wsdisplay* at ...
wskbd* at ... mux N
wsmouse* at ... mux N


pseudo-device wsmux [count]

The wscons driver provides support for machine-independent access to the console.

wscons is made of a number of cooperating modules, in particular

wscons does not define its own set of terminal control sequences and special keyboard codes in terms of termcap(5). Instead, a “terminal emulation” is assigned to each virtual screen when the screen is created (see wsconscfg(8)). Different terminal emulations can be active at the same time on one display.

The following choices are available:

dumb
This minimal terminal support is always available. No control sequences are supported besides the ASCII control characters. The cursor is not addressable. Only ASCII keyboard codes will be delivered, cursor and functions keys do not work.
sun
The “sun” console emulation is available by default on sparc and sparc64 architectures, or if option WSEMUL_SUN was specified at kernel build time. It supports the control sequences of SUN machine consoles and delivers its keyboard codes for function and keypad keys (as far as present on the actually used keyboard).

ANSI colors are also supported on this emulation, if the TERM environment variable is set to rcons-color.

This emulation is sufficient for full-screen applications.

vt100
is available by default, but can be disabled with option WSEMUL_NO_VT100. It provides the most commonly used functions of DEC VT100 terminals with some extensions introduced by the DEC VT220 and DEC VT320 models. The features of the original VT100 which are not, or not completely, implemented are:
  • VT52 support, 132-column-mode, smooth scroll, light background, keyboard autorepeat control, external printer support, keyboard locking, newline/linefeed switching: Escape sequences related to these features are ignored or answered with standard replies. (DECANM, DECCOLM, DECSCLM, DECSCNM, DECARM, DECPFF, DECPEX, KAM, LNM)
  • Function keys are not reprogrammable and fonts can not be downloaded. DECUDK and DECDLD sequences will be ignored.
  • Neither C1 control set characters will be recognized nor will 8-bit keyboard codes be delivered.
  • The “DEC supplemental graphic” font is approximated by the ISO-latin-1 font, though there are subtle differences.
  • The actual rendering quality depends on the underlying graphics hardware driver. Characters might be missing in the available fonts and be substituted by more or less fitting replacements.

    Depending on the keyboard used, not all function keys might be available.

In addition to the plain VT100 functions, the following features are supported:

  • ANSI colors
  • Some VT220 -like presentation state settings and -reports (DECRSPS), especially tabulator settings.

In most applications, wscons will work sufficiently as a VT220 emulator.

The WSEMUL_DEFAULT kernel option allows selecting one of the described terminal options as the default choice. The default goes into effect at kernel startup, i.e., for the operating system console or additional screens allocated through the WSDISPLAY_DEFAULTSCREENS option (see wsdisplay(4)), or if no emulation type was passed to the wsconscfg(8) utility.

: these options allow running X servers or other programs using low-level console driver functions which were written specifically for other console drivers to run on OpenBSD systems. The options are in particular:

WSDISPLAY_COMPAT_USL
Support the protocol for switches between multiple virtual screens on one display as used by most PC-UNIX variants.
WSDISPLAY_COMPAT_RAWKBD
Allows getting raw XT keyboard scancodes from PC keyboards as needed by i386 X servers.
WSDISPLAY_COMPAT_PCVT
Emulates enough of the OpenBSD / i386 “pcvt” driver to make X servers work.
WSDISPLAY_COMPAT_SYSCONS
Emulates enough of the i386 FreeBSD “syscons” driver to make X servers work. Useful with FreeBSD binary emulation.

Linux/i386 X servers do usually run if the first two options are enabled together with the OpenBSD Linux binary emulation.

(To have programs looking for device special files of other console drivers find the wscons driver entry points, symlinks are a helpful measure.)

:

option WS_KERNEL_FG=WSCOL_XXX
 
option WS_KERNEL_BG=WSCOL_XXX
 
option WS_KERNEL_COLATTR="(WSATTR_XXX | WSATTR_YYY)"
 
option WS_KERNEL_MONOATTR="(WSATTR_XXX | WSATTR_YYY)"
Make console output originating from the kernel appear differently than output from user level programs (via /dev/console or the specific tty device like /dev/ttyC0). “WS_KERNEL_FG” and “WS_KERNEL_BG” set the foreground / background used on color displays.

The “WSCOL_XXX” arguments are colors as defined in /usr/include/dev/wscons/wsdisplayvar.h. “WS_KERNEL_COLATTR” and “WS_KERNEL_MONOATTR” are additional attribute flags used on color or monochrome displays, respectively. The arguments are defined in the same header file. Whether the attributes are supported or not depends on the actually used graphics adapter. These options are ignored by the “dumb” terminal emulation.

option WSCOMPAT_USL_SYNCTIMEOUT=nnn
The virtual screen switching protocol enabled by “WSDISPLAY_COMPAT_USL” uses a somewhat complex handshake protocol to pass control to user programs as X servers controlling a virtual screen. To avoid a non-responsive application locking the whole console system, a screen switch will be rolled back if the user application does not respond to a screen switch request within some time. This option sets the timeout (in seconds); the default value is 5 seconds.

intro(4), wsdisplay(4), wskbd(4), wsmouse(4), wsmux(4), wsconscfg(8), wsconsctl(8), wsfontload(8), wsmoused(8)

June 26, 2008 OpenBSD-5.1