OpenBSD manual page server

Manual Page Search Parameters

HOSTNAME.IF(5) File Formats Manual HOSTNAME.IF(5)

hostname.ifinterface-specific configuration files

The hostname.* files contain information regarding the configuration of each network interface. One file should exist for each interface that is to be configured, such as hostname.fxp0 or hostname.bridge0. A configuration file is not needed for lo0.

The configuration information is expressed in a line-by-line packed format which makes the most common cases simpler; those dense formats are described below. Any lines not matching these packed formats are passed directly to ifconfig(8). The packed formats are converted using a somewhat inflexible parser and the administrator should not expect magic — if in doubt study ifconfig(8) and the per-driver manual pages to see what arguments are permitted.

Arguments containing either whitespace or single quote characters must be double quoted. For example:

inet 10.0.0.1 255.255.255.0 10.0.0.255 description "Bob's uplink"

Each line is processed separately and in order. For example:

nwid mynwid
wpakey mywpakey
dhcp

would run ifconfig to set the nwid of the interface, run it again to set the wpakey of the interface, and then start dhclient(8).

The following packed formats are valid for configuring network interfaces with static addresses:

Regular IPv4 network setup:

inet [alias] addr netmask broadcast_addr options
dest dest_addr

Regular IPv6 network setup:

inet6 [alias] addr prefixlen options
dest dest_addr

Other network setup:

addr_family options

A typical file contains only one line, but more extensive files are possible, for example:

inet 10.0.1.12 255.255.255.0 10.0.1.255 media 100baseTX description Uplink
inet alias 10.0.1.13 255.255.255.255 10.0.1.13
inet alias 10.0.1.14 255.255.255.255 NONE
inet alias 10.0.1.15 255.255.255.255
inet alias 10.0.1.16 0xffffffff
# This is an example comment line.
inet6 alias fec0::1 64
inet6 alias fec0::2 64 anycast
!route add 65.65.65.65 10.0.1.13
up

The above formats have the following field values:

addr_family
The address family of the interface, generally “inet” or “inet6”.
The literal string “alias” if this is an additional network address for the interface.
addr
The optional address that belongs to the interface, such as 190.191.192.1 or fe80:2::1. It is also feasible to use a hostname as specified in /etc/hosts. It is recommended that an address be used instead of symbolic information, since the latter might activate resolver(3) library routines.

If no address is specified, the netmask, broadcast_addr, dest, and dest_addr options are invalid and will be ignored.

netmask
The optional network mask for the interface, e.g., 255.255.255.0. If addr is specified but netmask is not, the classful mask based on addr is used.
broadcast_addr
The optional broadcast address for the interface, e.g., 190.191.192.255. The word “NONE” can also be specified in order to configure the broadcast address based on the netmask. The netmask option must be present in order to use this option.
options
Miscellaneous options to set on the interface, e.g., “media 100baseTX mediaopt full-duplex”. Valid options for a particular interface type can be found in ifconfig(8). When used, the netmask and broadcast_addr options must also be present.
If the interface needs a destination address set, this is the literal text “dest”. As shown in the example, this declaration should start on a separate line.
dest_addr
The destination address to be set on the interface, such as 190.191.192.2. It is also feasible to use a hostname as specified in /etc/hosts. It is recommended that an address be used instead of symbolic information which might activate resolver(3) library routines.
prefixlen
The prefixlen number, or number of bits in the netmask, to be set on the interface, such as 64.
Comments are allowed. Anything following a comment character is treated as a comment.
command
Arbitrary shell commands can be executed using this directive, as long as they are available in the single-user environment (for instance, /bin or /sbin). Useful for doing interface-specific configuration such as setting up custom routes using route(8) or establishing tunnels using ifconfig(8). It is worth noting that “\$if” in a command line will be replaced by the interface name.

The following packed formats are valid for configuring network interfaces with dynamic addresses:

A DHCP-configured network interface setup consists of

dhcp options

The above format has the following field values:

The literal string “dhcp” if the interface is to be configured using DHCP. See dhclient(8) and dhclient.conf(5) for more details.
options
Miscellaneous options to set on the interface, e.g., “media 100baseTX mediaopt full-duplex”. Valid options for a particular interface type can be found in ifconfig(8).

IPv6 stateless address autoconfiguration:

inet6 autoconf options

The above format has the following field values:

The address family.
The literal string “autoconf”, to configure the interface using IPv6 stateless address autoconfiguration (SLAAC).
options
Miscellaneous options to set on the interface, e.g., “media 100baseTX mediaopt full-duplex”. Valid options for a particular interface type can be found in ifconfig(8).

If the network interface is a bridge, the options described in the bridge section of the ifconfig(8) manual page apply.

For example:

add fxp0
add ep1
-learn fxp0
#
!ipsecctl -F
#
static fxp0 8:0:20:1e:2f:2b
up    # and finally enable it

/etc/hostname.XXX
Interface-specific configuration files.

hosts(5), dhclient(8), ifconfig(8), netstart(8), rc(8)

March 10, 2017 OpenBSD-6.1